• Journal of the Korean GEO-environmental Society
• /
• v.13 no.11
• /
• pp.27-35
• /
• 2012

The discontinuity of rock is one of important elements that have impact on the dynamic movement of rock. A slope made of gneiss has complicated geological structure because of the gneiss forming process through metamorphism covering wide range and the anisotropic structure with foliation. In this study, before cutting slope, the rock of slope had been found as a good quality by the boring test. But during construction tension cracks had occurred in the section with 170m length during large-scale excavation work with depth more than 20m. Ground surface geological investigation, boring exploration, resistivity logging and borehole image processing had been done to find the causes of the tension crack. It was possible to estimate the scale of fault existing in large area through resistivity logging and geological investigation. Large scale slickenside and fault clay had been found as the result of comprehensive analysis.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.42-52
• /
• 1995

In the evaluation of aging degradation on the structural materials based on the fracture mechanics, the detection and size prediction of defect are very important. Aiming at nondestructive detection and size prediction ol defect with high accuracy and resolution, therefore, an lnduced Current Focusing Potential Drop(ICFPD) technique has been developed. The principle of this technique is to induce a focusing current at an exploratory region by an induction wire flowing an alternating current(AC) that is a constant ampere and frequency. Defects are assessed with the potential drops that are measured the induced current on the surface of metallic material by the potential pick-up pins. In this study, the lCFPD technique was applied for evaluating the location and size of the surface crack and blind crack made in plate specimens, and also for detecting the defects existing in valve, a field component, that were developed by SCC etc. during the service. The results of this present study show that surface crack and blind crack are able to defect with potential drop. these cracks are distinguished with the distribution of potential drop, and the crack depths can be estimated with each normalized potential drop that are parameters estimating the depth of each type crack. In the field component, the defects estimated by experiment result correspond with those in the cutting face of the measuring point within a higher sensitivity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.794-797
• /
• 2004

In this study, tensile adhesive strength(TAS) test was carreid out for evaluated the effects of temperature conditions (-20, -10, 0, 5, 10, 20, 30, $40^{\circ}C$) on the tensile adhesive characteristics about 4 type waterproofing membranes which were commercially used in bridge decks. And, failure appeariences of waterproofing systems in each temperature after TAS test were observed the sawing surfaces of waterproofing systems for whether or not damaged of waterproofing membranes. Also, correction coefficient of TAS with temperature were calculated using 4 type waterproofing membrane. It could be shown that the higher TAS and shear adhesive strength, the lower temperature, regardless of the type of waterproofing membrane. Temperature sensibility of TAS was especially remarkable in epoxy membrane. Failure type was occurred the ductile failure in $30^{\circ}C\;and\;40^{\circ}C$. From these results, it was shown that if ambient temperature above $30^{\circ}C$ maintains for a long time, waterproofing membrane will be deformed by softening. Otherwise, waterproofing membrane in temperature below $20^{\circ}C$ shown that occurred the brittle failure. From the results of visual observation of cutting surface for specimen, the thin waterproofing membranes shown indented by hot aggregate of the asphalt mixtures. Therefore, it could be known that the specification of waterproofing membrane thickness is necessary by waterproofing membrane type. As temperature change varied with pavement depth, the interface temperature was more important than ambient temperature in TAS test. Now, TAS test results were limited only in $-10^{\circ}C\;and\;20^{\circ}C$ temperature, but correction coefficient of TAS by ambient temperature could be used as a solution to deal with this problem.

• Fashion & Textile Research Journal
• /
• v.15 no.4
• /
• pp.514-522
• /
• 2013

This study reviews the principles for the techniques of Impressionist paintings as well as analyzed contemporary fashion designs with a focus on a motif-building technique based on the laws of a screen equivalent as a visual formative approach. We provide design principles based on fashion design painting techniques. Previous research on the laws of the screen equivalent of Impressionist paintings were studied and a qualitative analysis was conducted on fashion design cases from 2011, 2012 S/S and F/W collections. The analysis resulted in the following outcomes. First, the development of new motifs were found directly correlated to the creativity of design if it was a motif-building design. Second, in the selected fashion design cases, cutting lines and details were covered by motifs and their shapes collapsed in regards to overall visual uniformity so that specific details were hard to identify. Third, clothing shapes are recognized the changing colors of motifs and not through construction pattern lines; therefore, the expressions of diverse visual forms were available without being disturbed by construction pattern lines. This is deemed equivalent to an Impressionist painting style that depicts shapes with colors instead of lines. Lastly, the cases covered in this study have created new visual aspects that replace the stereoscopic spatial depth of clothes with a 'sensuous surface'. The pleasures derived from the sensuous surface are deemed equivalent to the visual pleasures created by Impressionist paintings.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.2
• /
• pp.77-84
• /
• 2009

This paper is to investigate the effect of the immersion time in the traditional hairtail hand line for developing the fishing methods and the fishing gear in the coast of jeju. The operating of 32 times was made with each different immersion time of hairtail hand line, and the relations between the catch and the immersion time were examined. As the result, targeted species rate was over 98% of total catch. From about 800 seconds after casting, the hooking rate was decreased and the bite loss rate was increased, it seems to be made by the decreasing factors of predators including the cutting of branch lines etc. In addition, it was supposed that the hooking rate and the bait loss rate had a deep connection with feeding time zone. The level of the correlation coefficient of the bait loss rate according to the immersion time was 0.54 at $p{\leq}0.01$, in the case of the hooking rate, 0.59 was chosen after about 800 seconds. The hooking rate and the bait loss rate according to the hook number were not irrelevant to the fish school layer. Additionally, it was assumed that the bait loss rate was related to the depth of water.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.2
• /
• pp.62-67
• /
• 2002

This paper - following 'Development of multi-purpose marine waste cleaning systems for the shallow waters (Part I : preliminary conceptual design)'- describes on the system development and the sea trial performance evaluation(Cho[2003]). The multi-functional seabed waste collecting system and the towing hook system were developed. The maximum working depth of these systems are 15 and 100 meters, respectively(MOMAF[2001]). For the multi-purpose use to collect the marine waste, this system contains floating waste collecting device for the waste on seawater and remained waste collecting device for the waste on seabed, while steel wire cutting system is added for higher efficiency In order to evaluate the system performance, the prototype of multi-functional system was constructed and the sea trial test at shallow water were carried out. As a result, this system operated well with safe and without any interaction so that the developed systems are practicable and applicable.

• Journal of Korea Multimedia Society
• /
• v.13 no.9
• /
• pp.1391-1398
• /
• 2010

Animation is breathing life into drawings through motion. Animation is formed by the afterimage phenomenon, that is, deviation of sequential pictures in every frame makes a person possibly perceive it as a live video. Consequently, animation is mostly produced using traditional frame-by-frame methods. The study of relations on timing has been a major concern of animation theory. Nevertheless, issues of timing on production outcomes and effectiveness are mostly ignored. Special focus, analysis and leadership studies on timing are addressed on animatics. Creating better timing through animatics, that is writing movies, directing, scheduling and amending storyboard in pre-production stage, eventually shorten time to animation production. This research is centered on animatics as a cutting edge educational courses. This course will introduce students to the animation production skill and instructors to in-depth teaching points. One of the concepts that we want to go for is keeping animatics apart from mere storyboard. In conjunction with the animation theory, this research conducted under the focus of production of animatics will lead to more efficient way of education on animatics.

• Journal of Information Technology Services
• /
• v.19 no.5
• /
• pp.137-153
• /
• 2020

Most enterprises today work on digital transformation projects to cope with uncertainties caused by the rapid change and cutting-edge technology. The key point is they need to take a novel approach on new projects for high performance. In this context, there is a growing interest in utilizing agile method; however, many studies on Impact of Digital Transformation on the Results of Innovation do not deal with agile methodology. The research specifies the case of Seoul Metro, regarded as best-practice on digital transformation, based on the agile way of working. The case study is based on in-depth interview with Seoul Metro's executives and employees, and the interview is analyzed using keywords from the 12 Agile Principles. Thus, among the 12 Agile Principles, Motivation and Trust, Face-to-face Interactions, Continuous Attention to Technical excellence and good design, Self-Organizing Team contributed the most to successful digital transformation projects. In addition, based on Requirements Uncertainty and Technical Degree of Uncertainty, they carry different kinds of traits. For instance, the higher the uncertainty toward requirements and required technology is, the more technological development pace is maintained. Given the conservative nature of public corporations, it is necessary to adopt the agile way of working, such as improving employees' technological capabilities and allowing teams to be organized within themselves, in a bid to produce successful innovation outcome.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1B
• /
• pp.71-82
• /
• 2007

Recent advances in optical-network technologies have led to the advent of broadband networks reaching 10 Gbps. The increase of available network bandwidth envisions wide-spread use of broadband applications such as uncompressed Internet HDTV, which would be a cutting-edge application for networked collaborations. Despite of breakthroughs in high-performance systems and networks, expensiveness blocks wide-range deployments of uncompressed Internet HDTV systems. In this paper, we propose a low-cost uncompressed Internet HDTV system and discuss its software architecture in depth. We conducted several network-based experiments utilizing a research network test-bed to evaluate the performance of the proposed system.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.156-161
• /
• 2002

It depends on the joint configuration, dimensions and constraints on the joint whether the residual stress at the root of single-sided butt weld is tensile or not. Therefore, recommendation is generally made that high R ratio should be used in the fatigue test of this type of joint in order to prevent excessively long life caused by compressive residual stress. in this research, the residual stress profile in butt weld joint was obtained through compliance method, using successive extension of a slot and measurement of the variation of strain during the slot extension. The residual stress profile was firstly assumed to be the linear summation of Legendre polynomials up to 9th order excluding 0th and 1st order. Strain variation on the surface was measured while the slot was being extended by cutting to find out the 8 unknown coefficients of each polynomial tenn. The cut was made by the electric discharge machine. It was concluded that the residual stress near the surface stayed positive, however, it turned into the negative value as soon as it passed through 2 or 3 mm depth. Several fatigue tests were also carried out under zero stress ratio. Test results showed that fatigue life coincides well with the design cuive of butt joint in British Standards, which supports that it is tensile residual stress that exists near the weld root.