• Journal of KIISE
• /
• v.44 no.3
• /
• pp.223-231
• /
• 2017

In this paper, we study the performance of recently popular multi-core systems in mobiles. Previous research on the multi-core performance usually focused on the desktop PC. However, there is enough scope to further analyze heterogeneous multi-core systems. Therefore, by extending homogeneous multi-core systems, we analyze the heterogeneous multi-core systems using Size Interval Task Allocation (SITA) for job allocation, and Shortest Remaining Processing Time (SRPT) scheduling, for each individual core. We propose a new computational method regarding the cutoff point, which is crucial in analyzing SITA, by calculating the sojourn time. This facilitate easy and accurate calculation of the sojourn time. We further confirm our analysis through the ESESC simulator that provides actual measurements.

• The Journal of Engineering Geology
• /
• v.11 no.1
• /
• pp.81-99
• /
• 2001

In order to clarify an effect of the cutoff grouting, a series of field experiments were performed during construction of the waterway tunnel from the River Gilancheon(Andong) to the Youngcheon dam. The experiments were conducted in three different ways based on the grouting time in the construction sequence, i.e., the pre-grouting, after-grouting and consolidation grouting tests. And those were also planned to compare the efficiency of grouting in relation to the material types of grout, base rock types and other geologic factors such as discontinuities, depth and direction of grouting holes, and number of grouting stages. Among the materials of grout employed in the experiments, such as a common Portland cement, a micro-cement, a micro-cement with sodium silicate, and a urethane, the urethane was the most effective as the cutoff grouting. And for the same grout material, the pre-grouting was more effective to cutoff the water inflow comparing to the after-grouting and the consolidation grouting. For the rock types, the grouting efficiency in the sedimentary rocks as a base rock was less than the other rocks such as granite and volcanic rocks, which is believed due to the smaller separation of joints and the abundance of infilling materials in the joints developed in the sedimentary rocks. There was no direct relationship between the total RMR value of the rock mass and the grouting efficiency, however, the joint separation which is one of the RMR criteria is believed to have positive relation to the grouting efficiency. And the direction of the grouting holes might not so much affect on the grouting efficiency while increasing the number of grouting stage showed the better results.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.3
• /
• pp.283-292
• /
• 1996

Objective: To determine the cutoff value of clomiphene citrate challenge test(CCCT) that can predict the normal and abnormal(diminished) ovarian response group and to assess the usefulness of CCCT as a predictor of ovarian reserve. Materials and Methods: From March 1994 to Februry 1996, CCCT was performed to 129 infertile patients and among them, 20 patients whose basal FSH on the third day of menstrual cycle was more than 20 mIU/ml were excluded. At the same time, the same CCCT was performed to the fifteen healthy volunteers with proven fertility to determine the cutoff value of CCCT. Results; 1) A FSH value higher than 23.4 mIU/ml, measured on the 10th day of menstrual cycle, was defined as a abnormal ovarian response. The cutoff value of 23.4 mIU/ml is more than 2 standard deviations(SD) above the mean value of 15 healthy women after CCCT. 2) The abnormal CCCT group, the subpopulation with a FSH value of 23.4 mIU/ml or more, was 7.3%(8/109) and their mean age was higher than the normal CCCT group($36.5{\pm}4.5$ vs. $32.9{\pm}4.8$, P = 0.059). And the percentage of the patients older than 35 years of the abnormal CCCT group was significantly higher than that of the normal CCCT group(62.5% vs. 38.6%, p <0.05). 3) There was no correlation between the hormone values of the third day and the 10th day of menstrual cycle before and after CCCT except between FSH of the third day and the 10th day. Conclusion: The CCCT is a good method to predict the individual ovarian response to COH for ART, especially in the patients who has no other abnormal findings that predict poor prognosis. And it is neccessary to determine the cutoff value of CCCT by the large numbers of randomized study, and combining the previously proven prognostic factors, it can be applicated in many individual centers for evaluate the ovarian response before ART program.

• Journal of Veterinary Clinics
• /
• v.37 no.4
• /
• pp.185-190
• /
• 2020

This retrospective, echocardiographic study using 144 dogs with clear systolic tricuspid regurgitation on Doppler echocardiography was performed to determine the diagnostic value of the systolic tricuspid regurgitation velocity/pulmonary artery flow velocity time integral to predict the Doppler estimates of dogs with tricuspid regurgitation pressure gradient compared with other cardiac indices of pulmonary hypertension, and to investigate a cutoff value to select patients with a potentially poor outcome. The systolic tricuspid regurgitation velocity/pulmonary artery flow velocity time integral increased significantly as the severity of pulmonary hypertension increased and had a correlation coefficient that was analogous to those of other conventional cardiac indices. A cutoff value greater 1.65 provided the best-balanced sensitivity (84%) and specificity (80%) in determining patients with a poor prognosis. In conclusion, the systolic tricuspid regurgitation velocity/pulmonary artery flow velocity time integral is readily obtained using routine echocardiography and could provide a non-invasive, novel, and supplementary index for evaluating dogs with pulmonary hypertension as useful prognostic criteria, particularly in those with advanced pulmonary hypertension.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.207-213
• /
• 2017

The Adaptive Front-lighting System (AFS) is a part of the active safety system, providing optimized vision to the driver during night time and other poor-sight conditions of the road by automatic adaptation of lighting to environmental and traffic conditions. Basically, an AFS provides four different modes of the passing beam as designated in an United Nations Economic Commission for Europe regulation (ECE324-R123): neutral state or country light (Class C), urban light (Class V), highway light (Class E), and adverse weather light (Class W). In this paper, we first present an optics design for an AFS system capable of producing the Class C/V/E/W patterns requiring only on/off modulation of multi-array LEDs with no need for any additional mechanical components. The AFS optics consists of two separated modules, cutoff and spread; the cutoff module lights a narrow central area with high luminous intensity, satisfying the cutoff regulation, and the spread module forms a wide spread beam of low luminous intensity. Each module consists of two major parts; the first converts a discretely positioned LED array into a full-filled area emitting light source plane, and the second projects the light source plane to a 25 m away target plane. With the combination of these two optics modules, the four beam patterns are formed by simple on/off modulation of multi-array LEDs. Then we report the development of a prototype that was demonstrated to provide the four beam patterns.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.9
• /
• pp.64-72
• /
• 1998

In this paper, the design of a current integrator for low-voltage, low-power, and high frequency applications using complementary high swing cascode current-mirror is presented. The proposed integrator decreases output current errors due to non-zero input resistance and non-infinite output resistance of the simple current integrator. As a design example, the 3rd order Butterworth lowpass filter is designed by a leapfrog method. Also, we apply the predistortion design method to reduce the magnitude distortion which occurs at a cutoff frequency by the undesirable phase shift of a lossless current integrator. The designed current-mode filter is simulated and examined by SPICE using 0.8$\mu\textrm{m}$ CMOS n-well process parameters. The simulation results show 20MHz cutoff frequency and 615㎼ power dissipation with a 2V power supply. And the cutoff frequency of the filters can be easily changed by the DC bias current.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.273-273
• /
• 2012

컷오프 진단법은 두 개의 탐침 형태로 제작된 마이크로 웨이브 진단법으로, 간단한 수식을 통해 전자밀도, 전자온도 등을 측정할 수 있다. 컷오프 탐침은 방사 안테나, 측정 안테나와 네트워크 분석기로 구성되어 있다. 네트워크 분석기는 두 안테나 사이의 플라즈마 투과 스펙트럼을 만드는데 쓰이며, 스펙트럼 분석을 통해 플라즈마 변수들을 측정할 수 있다. 이 진단법은 장치나 분석방법이 매우 간단한 장점을 지니며, 약 1 mW 정도의 적은 파워를 사용하여 플라즈마 상태를 거의 변화시키지 않는 측정이 가능하다. 또한 CF4와 같은 공정 가스를 이용한 플라즈마에서도 사용이 가능하다. 그러나 컷오프 진단법을 사용한 측정은 다른 종류의 진단법과 마찬가지로, 약 1초 정도의 긴 시간을 필요로 하는 단점이 있어, 펄스 플라즈마나 토카막과 같이 빠르게 변하는 플라즈마를 측정하기에는 무리가 있다. 최근에 개발된 푸리에 컷오프 탐침(Fourier Cutoff Probe, FCP)는 기존의 컷오프 탐침의 느린 시간분해능을 개선하기 위해 개발되었다. [1] 펄스 형태의 단일신호를 플라즈마를 투과하기 전후로 비교하면 투과 스펙트럼 및 플라즈마 변수들을 얻을 수 있으며, 기존 연구에서 구한 시간 분해능은 약 15 나노초였다. 이 값은 펄스 발생장치의 스펙에 따라 변하게 된다. 펄스폭이 짧을수록 시간분해능이 좋아지지만, 무한정 좋아질 수는 없다. 이 논문에서는 FCP 측정의 시간 분해능을 이론적으로 구하고, 시간 분해능의 이론적 한계를 구했다.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1417-1422
• /
• 2003

An electrical cascade impactor is a multistage impaction device to separate airborne particles into aerodynamic size classes using electrical method. We designed a real-time three-stage electrical low-pressure impactor, which is proper to nanometer sized environmental aerosols. Performance evaluation was carried out for stage 1 and 2. The monodisperse liquid dioctyl sebacate (DOS) particles were generated using condensation-evaporation followed by electrostatic classification using DMA (differential mobility analizer) for particles with diameters in the range of $0.04{\sim}0.8{\mu}m$. The evaluation of the electrical impactor is based on the use of two electrometers, one connected to the impaction plate of the impactor, and the other to the faraday cage as backup filter. The results showed that the experimental 50% cutoff diameters in the operation pressure were 0.53 and $0.12{\mu}m$ for stage 1 and stage 2. The effect of operation pressure on the cutoff diameter and the steepness of collection effcieicy curves is investigated.

• Journal of Korean Academy of Nursing
• /
• v.46 no.1
• /
• pp.59-68
• /
• 2016

Purpose: Increase in suicide rate for senior citizens which has become widespread in our society today. It is not a normal social phenomenon and is beyond the danger level. The contents of this study include Korean senior citizens' suicide related risk factors and warning signs, and the development of a simple Geriatric Suicide Risk Scale. Methods: This study is Methodological Research to verify reliability and validity of the Geriatric Suicide Risk Scale according to the tool development process suggested by Devellis (2012). Results: For predictive validity assessment, high suicide screening accuracy was showed with an Area under the ROC curve (AUC) of .93. For the optimal cutoff point of 11, sensitivity was 93.9%, and specificity, 75.7% which are excellence levels. Cross validity for assessment of generalization possibility showed the Area under the ROC curve (AUC) as .82 and in case of a cutoff point of 11, sensitivity was 73.7%, and specificity, 65.9%. Conclusion: When it comes to practical nursing, it is significant that the Korean Geriatric Suicide Risk Scale has high reliability and validity through adequate tool development and the tool assessment step to select degree of suicide risk of senior citizens. Also, it can be easily applied and does not take a long time to administer. Further, it can be used by health care personnel or the general public.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.4
• /
• pp.219-225
• /
• 2018

Cosmic rays are ions that move at relativistic speeds. They generate secondary cosmic rays by successive collisions with atmospheric particles, and then, the secondary particles reach the ground. The secondary particles are mainly neutrons and muons, and the neutrons are observed by the ground neutron monitor. This study compared the diurnal variation in cosmic ray intensity obtained via harmonic analysis and that obtained through the pile-up method, which was examined in a previous study. In addition, we analyzed the maximum phase of the diurnal variation using four neutron monitors with a cutoff rigidity below approximately 6 GV, located at similar longitudes to the Oulu and Rome neutron monitors. Expanding the data of solar cycles 20-24, we examined the time of the maximum cosmic ray intensity, that is, the maximum phase regarding the solar cyclic modulation. During solar cycles 20-24, the maximum phase derived by harmonic analysis showed no significant difference with that derived by the pile-up method. Thus, the pile-up method, a relatively straightforward process to analyze diurnal variation, could replace the complex harmonic analysis. In addition, the maximum phase at six neutron monitors shows the 22-year cyclic variation very clearly. The maximum phase tends to appear earlier and increase the width of the variation in solar cycles as the cutoff rigidity increases.