• Progress in Medical Physics
• /
• v.1 no.1
• /
• pp.61-68
• /
• 1990

We have designed the calculation model(AMC method) of electron output for the cut-out fieldsand studied the influence of shielding block size. The output of electron was measured in the water phantom at dmax, for 20 $\times$ 20cm$^2$ cone size electron beams from CL/1800 linear accelerator(Varian, USA), Which generates the energy of 6, 9, 12, 15 and 18MeV electron beams. The shielding blocks were rectangular or squre shaped, low melting point alloy. We can predict the output from the arbitrarily rectangular shaped block within 1% error. by using the AMC method, which considers the contribution of the collimator(block) scatter and the phantom scatter.

• Animal Bioscience
• /
• v.34 no.1
• /
• pp.127-133
• /
• 2021

Objective: This study was conducted to evaluate the correlation between body size traits, carcass traits, and primal cuts in Hanwoo steers. Methods: Sixty-one beef carcasses were classified for conformation and primal cut weight. Additionally, carcass weight, fat thickness, carcass dimensions, and longissimus muscle area were determined to complement the grading. Results: The average live weight and cold carcass weight were 759 and 469 kg, respectively. The mean carcass meat, fat, and bone proportions were 551, 298, and 151 g/kg, respectively. Primal cuts weights showed significant positive correlations (p<0.001) of 0.42 to 0.82 with live weight, carcass weight, and longissimus muscle area and a significant negative correlation with carcass fat (without shank, -0.38 to -0.10). Primal cut weights were positively correlated (p<0.01) with carcass length (0.41 to 0.77), forequarter length (0.33 to 0.57), 6th lumbar vertebrae-heel length (0.33 to 0.59), 7th cervical vertebrae carcass breadth (0.35 to 0.58), 5th to 6th thoracic vertebrae breadth (0.36 to 0.65), 7th to 8th thoracic vertebrae girth (0.38 to 0.63), and coxae girth (0.34 to 0.56) and non-significantly related to cervical vertebrae length and coxae thickness. Conclusion: There was a high correlation among live weight, carcass weight, longissimus muscle area, carcass length, 7th cervical vertebrae carcass breadth, 5th to 6th thoracic vertebrae breadth, and 7th to 8th thoracic vertebrae girth of the primal cuts yield. The correlation between fat and primal cut yields was highly significant and negative. Carcass length and 7th to 8th thoracic vertebrae girth, appear to be the most important traits affecting primal cut yields.

• Korean Journal of Poultry Science
• /
• v.39 no.3
• /
• pp.163-166
• /
• 2012

This study was carried out to compare the cut meat yields of Cobb and Avian and their profits at productive aspect. Two different breeds, Cobb (34,086,758 birds) and Avian (4,087,600 birds) produced from January 2009 to August 2009 were used. The whole chickens were divided into cut meats including tenderloins, breast fillets, whole wings, boneless thighs, and drumsticks. The growth performance and cut meat yield of Cobb and Avian were measured to investigate possible profit difference. Cobb was superior in the aspect of production performance to Avian with significant differences in survival rate and slaughtering age. As the weight gained, the yields of Cobb increased in breast fillets and boneless thighs as well as lean meat percentage. Significantly higher yield (%) of breast fillets was produced by Cobb at size 14 when compared with Avian. However, there was no significant difference in expected market prices for both cut meat and whole chicken meat between the two breeds in all sizes.

• The Research Journal of the Costume Culture
• /
• v.1 no.2
• /
• pp.145-157
• /
• 1993

This study aimes to investigate the garment ease of pe-school children's clothing in accordance with arm movement. The experiment was done with 4 per-school children fro mage 3 to age 5, and 3 types of experimental clothes were made ; sleeveless, half sleeve, and long sleeve. The waist pattern and the sleeve pattern of each experimental clothes has no garment ease. And experimental clothes were examined to obtain the necessary ease of armcye line and waist lien by cross-cut method. The results of investigation can be summarized as follows ; 1. The resulting movement ranges of experimental clothes with no garment ease were 131.5°(sleeveless), 71.75°(half sleeve), and 62.25°(long sleeve). 2. The size order of cross-cut opening of waist lien movement were (side>front>back), and (half sleeve>long sleeve>sleeveless). 3. When the base point of measurement was set to armpit point by arm the latitudinal length of cross-cut opening of armcye line by arm movement was (anterior armpit part > posterior armpit part), and longitudinal length of cross-cut opening was (upper part>lower part).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1666-1673
• /
• 1997

In order to investigate the characteristics of sound-structure interaction plate having a cut-out, we modeled a rectangular cavity and the flexible plate of the cavity. Because the particle velocity of air is the same as that of plate on the plate, we could easily redefine vibration equation using the velocity potential. We calculated the natural frequencies of plate using orthogonal polynomial functions which satisfy the boundary conditions in the Rayleigh-Ritz method. For the change of vibration characteristics, the effect of sound-structure interaction is more dominant than that of cut-out size.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.664-676
• /
• 2016

Recently, the demand on the Hanok have been increased with social change. However, Hanok has a major problem of a rising costs caused by hand-made process. So, performance comparison between hand-made process and pre-cut process was conducted to modularize the joints in Hanok. Douglas-fir was used to manufacture the structural size dovetail joints by hand-made and pre-cut precess. The bending strengths on joints with two process were evaluated. The average ultimate load of pre-cut joints was 1.5 times higher than that of hand-made joints. F-test results in both process showed a great relationships between ultimate load and tenon's size variation. The length and thickness of tenon showed a proportional relationship with the ultimate load, but the tenon width showed inverse proportion with the ultimate load. This results may be used as basic data for the joint modularization of Hanok.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.154-162
• /
• 2009

Sonic wave dispersion characteristics are one of the most important targets of study, particularly in estimating shear wave velocity from borehole sonic logging. We have tested dispersion characteristics using monopole and dipole sources. Theoretical dispersion curves were computed for tool-absent and tool-included models having the same physical properties but different diameters (including ${\Phi}520mm$, ${\Phi}150mm$, and ${\Phi}76mm$). Comparisons were made between boreholes of different sizes and between tool-absent and tool-included models. Between the tool-included and the tool-absent boreholes, a close similarity in dispersion curve shape was revealed for the monopole source, and a significant difference was shown for the dipole source. However, for the cut-off frequency, particularly in the engineering boreholes (${\Phi}76mm$ and ${\Phi}50mm$), a significant difference was observed for signals from the monopole source, but approximately the same cut-off frequencies were found with the dipole source. This indicates the need of careful choice of source frequency in monopole-source sonic logging, particularly in an engineering borehole. The results of numerical experiments show that cut-off frequency is exponentially proportional to the inverse of borehole radius, irrespective of the mode type and the presence of a tool, and that the cut-off frequencies for each borehole environment could be expressed as an exponential function, rather than the inversely proportional relationship between the cut-off frequency and the borehole radius that was previously generally recognised. From the direct comparison of dispersion curves, the effects on the dispersion characteristics of borehole size and the presence of the tool can be revealed more clearly than in previous studies, which presented the dispersion curve and/or characteristics for each borehole environment separately.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1984.10a
• /
• pp.22-24
• /
• 1984

The mode spot size is a fundamental parameter of a single mode optical fibre which determines especially the spilces and the microbending loss. The spot-size measurement is recognised to be a useful mean to define the cut-off wavelength of single-mode fibres, ESI parameters and to predict the modal dispersion. To determine the ESI parameters, this paper is based on the use of a Ronchi ruling.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.101-106
• /
• 2006

This paper describes performance design of a solid rocket motor on which thrust cut-off system is installed, and evaluates performance of a rocket motor according to a size of TCO ports. TCO system installed on motors was made to carry out firing tests, and the trend of thrust due to various sizes of TCO port was analyzed to find the existence of the port size for maximum reversal thrust. Conservation equations were used to design performance of motors and to analyze test results. This technique for performance design will be usefully applied to the design of similar TCO systems.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.53-56
• /
• 2006

This paper describes performance design of a solid rocket motor on which thrust cut-off system is installed, and evaluates performance of a rocket motor according to a size of TCO ports. TCO system installed on motors was made to carry out firing tests, and the trend of thrust due to various sizes of TCO port was analyzed to find the existence of the port size for maximum reversal thrust. Conservation equations were used to design performance of motors and to analyze test results. This technique for performance design will be usefully applied to the design of similar TCO systems.