• 전기학회논문지
• /
• 제62권6호
• /
• pp.876-880
• /
• 2013

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The principal factor of the fire is electric arc or spark accompanied with such electric faults. Earth Leakage Circuit Breaker (ELB) and Molded_case Circuit Breaker (MCCB), that is, Residual Current Protective Devices (RCDs) used on low voltage distribution lines cut off earth leakage and overload, but the RCD can not cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied in low voltage distribution panel are prescribed to rated breaking time about 30[ms] (KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To improve such problems, this paper studies on an arc fault circuit interrupter (AFCI) using the distorted voltage wave in electric arc faults. The proposed voltage sensing type AFCI is an electrical fire prevention apparatus of new conception that operates a circuit breaker with sensing the instantaneous voltage drop of line voltage at electrical faults occurrence. The proposed AFCI is composed of control circuit topology using some semiconductor switching devices. Some experimental tests of the proposed AFCI confirm practicality and the validity of the analytical results.

• Journal of Information Processing Systems
• /
• 제6권4호
• /
• pp.609-620
• /
• 2010

In order to provide a tailored education for learners within the ubiquitous environment, it is critical to undertake an analysis of the learning activities of learners. For this purpose, SCORM (Sharable Contents Object Reference Model), IMS LD (Instructional Management System Learning Design) and other standards provide learning design support functions, such as, progress checks. However, in order to apply these types of standards, contents packaging is required, and due to the complicated standard dimensions, the facilitation level is lower than the work volume when developing the contents and this requires additional work when revision becomes necessary. In addition, since the learning results are managed by the server there is the problem of the OS being unable to save data when the network is cut off. In this study, a system is realized to manage the actions of learners through the event interception of a web-browser by using event hooking. Through this technique, all HTMLbased contents can be facilitated again without additional work and saving and analysis of learning results are available to improve the problems following the application of standards. Furthermore, the ubiquitous learning environment can be supported by tracking down learning results when the network is cut off.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.572-579
• /
• 1995

Most of conventional ultrasonic transducers are constructed to generate either longitudinal or shear waves, but not both of them. We investigate the mechanism of dual mode transducers that generate both of the longitudinal and shear waves simultaneously with single PZT element. The study is aimed to find the optimally desired cut by examining the anisotropic piezoelectric properties. Theory predicts that a mixed P/S mode transducer can be constructed using a rotated Z-cut of PZT piezoelectric ceramics. We study the performance of a PZT element as a function of its rotation angle so that its efficiency is optimized to excite the two waves as much as equally strong. The results are verified by the waveform in pulse-echo computer simulation and experiments. When the transducer is subjected to impedance analysis, it shows two thickness mode resonances, each of which being a mixed P/S thickness mode. By examining wave speeds on E transmitter delay line receiver setup, it is confirmed that the transducer can transmit and detect both longitudinal and shear wave simultaneously.

• 한국육종학회지
• /
• 제40권1호
• /
• pp.54-57
• /
• 2008

The New bicolor spray rose (Rose hybrida Hort.) cultivar was developed by line selection in 2000 at the Flower Breeding Research Institute, Gyeongnam ARES. Characteristics were investigated three times from 2003 to 2006. 'Yellow King' was crossed between 'Spring Time' and 'Flair' and it has a Yellow Orange-group color (RHS No. 16A), few thorns and spray flower with a good harmony between ray floret and flower center. The vase life of cut flower was 9.1days. It was registered as commercial cultivar in 2006. This new cultivar could be planted in most of greenhouse production region of Korea and will be released to general rose growers in 2007.

• 공학기술논문지
• /
• 제11권4호
• /
• pp.227-235
• /
• 2018

Studies on the laser cutting processing characteristics of magnesium alloys can be divided into three parts, comparing the cutting faces of magnesium alloy and aluminum alloy, observing the shape of the corner where straight lines meet, and observing the straight lines and arcs. First, there were no laser cutting conditions for magnesium alloys, so it was observed to cut magnesium alloy and aluminum alloy under the same processing conditions as aluminum alloy to shape and surface of the cut surface. Next, to observe the characteristics of the corner, we observed the shape of the corner according to the angle change of the part where the two lines meet, and finally we observed various angles to observe the characteristics of the part where the arc meets the line. Finally, laser cutting processing characteristics of magnesium alloys and aluminum alloys obtained based on the above study contents were summarized.

• International Journal of Costume and Fashion
• /
• 제5권2호
• /
• pp.55-67
• /
• 2005

The purpose of this study is to document an unidentified velvet fabric which is located in the Museum. The investigation was conducted by analyzing color, weaving technique. pattern of the study object. To identify the origin of the object, many references about color trends, construction methods and patterns were accessed. Two comparative objects which were dating from 1600 to 1699 in the Museum of F.I.T. were selected since they are similar to the study object. The results of this study can be summarized as follows; (1) The type of this study object is 'cut and voided velvet'. It is obtained establishing the motif as areas of cut pile so as to form a pattern, while leaving other areas of the grounded weave without pile. Two flowers and two tulips with S curved stems are composed as one unit in the vertical direction. (2) The colors used in this study object. which are ivory, smoke blue, medium orange, and yellow. are part of a new trend color in the $17^{th}$ century. (3) The vertical undulating stripe patterns are also of significance in this fabric. They seemed to be contemporary with the serpentine line which was common since the $15^{th}$ century and the vertical stripes pattern which appeared from the $16^{th}$ century. (4) The stylized tulip patterns of this study object began to appear in the early $17^{th}$ century. The stems and leaves of this patterns are less sinuous than the floral motifs of the later $17^{th}$ century. Therefore, the study object is dated to early in $17^{th}$ century because of the color combination. stripes. stylized tulips, leaves. and stems are showing the characteristics of this period.

• 기술사
• /
• 제16권3호
• /
• pp.5-23
• /
• 1983

On the Seoul Metropolitan Subway Construction of No. 3, 4 Line, the total length is 57 Km and it is now undergoing almost 55％ progress. The working method is classified into Open Cut of 70% and the rest of 30% tunnelling method in the 48 job site. Above tunnelling method is execute by American Steel Support System and the rest of 10 job site carried out by New Austria Tunnelling Method. This paper describes Blasting Standardizations works on the above Tunnelling ' Open Cut Method under big slogan, first safety, second execution. As a superintendent, I strived standardization of works with Better powder, Better Drills ' Better Pattern. Geological structure of Seoul area is composed by Jurassic Granite and also the above rockgroup are over burden by Alluviums as a Unconformity. First of all, I carried out the standard amount of powder and burden through experimental standard blasting by each powder as following Blasting works in the subway construction is surrounding shop Building, under pass the city river and also under pass highest building basement floor. I made allowable Blasting Vibration Value by West-Germany Vornorm DIN 4150, Teil 3 and should measure each blasting works as fellows all of powder is used basically Low-Gravity and Low Velocity such as Slurry, Ammonium Nitrate ' Finex I, II. for Smooth Blasting Instead of Gelatin Dynamite. Electric Detonation Cap is used basically M/S Delay Cup instead of Electric delay ' Simultaneous cap. I applied following formula V=KW3/4 $D^{-2}$ V=Particle Velocity (Cm/sec) K=Ginh Huh's Value W=Delay Charge (Kg) D=Distance(m) In the Open Cut, within 1m distance from H-pile I made to use the Concrete breaker, as following V=7W/$^{0.5}$V/$^{-1.75}$ On the Concentrate Building area, I advise to use Light class drill ø36m Bit and advance 1.1m per round blasting the three boom jumbo drill over ø45mm used only suburb of city.e Light class drill ø36m Bit and advance 1.1m per round blasting the three boom jumbo drill over ø45mm used only suburb of city.

• 한국인터넷방송통신학회논문지
• /
• 제17권2호
• /
• pp.257-262
• /
• 2017

본 논문에서는 이중 슬리브를 갖는 직사각형 평면 모노폴 안테나에 하프 커팅과 불연속 급전 구조를 적용하여 안테나 특성을 확인하였다. 이중 슬리브를 갖는 직사각형 평면 모노폴 안테나를 자기 대칭 라인을 중심으로 하프커팅을 하고, 급전부에 불연속 구조를 적용과 이중 슬리브 간격을 조정하여 임피던스 매칭을 하였다. 안테나 파라미터 특성을 확인하기 위하여 ANSYS사의 HFSS 시뮬레이터를 이용하였고, 안테나 크기는 $21{\times}40mm^2$이다. 제안한 안테나에서 VSWR이 2 이하인 시뮬레이션 주파수 대역은 2.6GHz~10.25GHz이다. 주파수 대역폭은 7.65GHz이다. 실제로 제작한 안테나의 주파수 대역은 3.3GHz~9.75GHz이며, 주파수 대역폭은 6.45GHz이다. 측정된 복사패턴 주파수는 3.5GHz, 5.5GHz, 7.5GHz, 9.5GHz이다. 모든 주파수에서 다이폴안테나 패턴과 유사한 복사패턴 결과를 얻을 수 있었다.

• 디지털융복합연구
• /
• 제16권10호
• /
• pp.479-484
• /
• 2018

일제 강점기 여성들 one length hair style의 변천사 및 형태학적 분석을 시도한 연구로서 선행논문과 저서를 바탕으로 형태, 질감, 색상 등 헤어디자인의 구성 요소들을 분석하여 다양한 형태의 one length hair style 커트가 가능해지는데 연구의 목적이 있다. 연구 결과 1910년-1920년대 one length hair style은 커트 길이의 단차가 전혀 없는 out line을 지닌 형태, 자연 그대로의 모발 질감, 자연 모발 색상을 보였다. 1930년대 one length hair style은 약간의 커트 길이의 단차를 보이면서 다이아몬드 형태, 자연스런 질감의 narrow wave, 과산화수소나 oxygenated water을 이용한 약간의 탈색이 이뤄졌다. 1940년대 one length hair style은 형태, 질감, 색상 면에서 화려한 미(美)를 추구하려는 특이점이 발견되지 않았다. 본 연구를 통해 one length hair style에 관한 심층적이고 세분화 된 후속 연구가 가능해지며, 헤어미용 교육의 기초 자료 및 뉴 모드의 트렌드 개발을 위한 초석으로 작용하리라 사료한다.

• Geomechanics and Engineering
• /
• 제23권6호
• /
• pp.513-521
• /
• 2020

In this paper, due to the need for cutting cement-soil group pile composite foundation under the 7-story masonry structure of Zhenghe District and the shield tunnel of Zhengzhou Metro Line 5, a field test was conducted to directly cut cement-soil single pile composite foundation with diameter Ф=500 mm. Research results showed that the load transfer mechanism of composite foundation was not changed before and after shield tunnel cut the pile, and pile body and the soil between piles was still responsible for overburden load. The construction disturbance of shield cutting pile is a complicated mechanical process. The load carried by the original pile body was affected by the disturbance effect of pile cutting construction. Also, the fraction of the load carried by the original pile body was transferred to the soil between the piles and therefore, the bearing capacity of composite foundation was not decreased. Only the fractions of the load carried by pile and the soil between piles were distributed. On-site monitoring results showed that the settlement of pressure-bearing plates produced during shield cutting stage accounted for about 7% of total settlement. After the completion of pile cutting, the settlements of bearing plates generated by shield machine during residual pile composite foundation stage and shield machine tail were far away from residual pile composite foundation stage which accounted for about 15% and 74% of total settlement, respectively. In order to reduce the impact of shield cutting pile construction on the settlement of upper composite foundation, it was recommended to take measures such as optimization of shield construction parameters, radial grouting reinforcement and "clay shock" grouting within the disturbance range of shield cutting pile construction. Before pile cutting, the pile-soil stress ratio n of composite foundation was 2.437. After the shield cut pile is completed, the soil around the lining structure is gradually consolidated and reshaped, and residual pile composite foundation reaches a new state of force balance. This was because the condensation of grouting layer could increase the resistance of remaining pile end and friction resistance of the side of the pile.