• Journal of Bio-Environment Control
• /
• v.7 no.2
• /
• pp.116-122
• /
• 1998

This study was conducted to investigate growth and flowering of hydroponically-grown carnation as affected by substrate and planting date, Three substrates, coir, perlite, and coir＋perlite(1：1. v/v), and two planting dates. May 1 and September 1 were used. Plant height and stem diameter at harvesting time of cut flowers were greater for the September 1 planting than for the May 1 planting. The plants planted on May 1 produced flowers with weak stems and short stem lengths. In addition, flower weight and blossom width were gloater for the September 1 planting than for the Mar 1 planting. The planting date had no significant effect on the number of petals, The carnation planted on May 1 flowered 50 days earlier compared to those Planted on September 1. Plant height and number of petals were the greatest in the plot of coir substrate. The results indicated that for commercial production of cut carnations in a hydroponic system, planting on September 1 is better than May 1. In addition. the results confirm that coir is the superior substrate for the production of cut carnations in a hydroponic system compared to either Perlite or coir＋perlite mixture.

• Korean Journal of Agricultural Science
• /
• v.7 no.1
• /
• pp.33-37
• /
• 1980

To clarify the influence of ethylene on flowering and senescence of carnation flowers and the treatment of the floral preservative solution for reducing their ethylene production, bud-cut carnations (Dianthus caryophyllus L. cv. Coral) were sprayed with/without 500 ppm ethephon [(2-chloroethyl) phosphonic acid] and then held in distilled water or preservative solution (5% sucrose+50 ppm $AgNO_3$+300 ppm 8-hydroxyquinoline). 1. Ethylene inhibited to bloom carnation flowers because of causing sleepiness. 2. Carnation flowers were led to senescence after a lot of ethylene was produced by them. Therefore, ethylene seems to act as a trigger of senescence in carnation flowers. 3. The features of senescence in carnation flowers were different in accordance with the amount of ethylene produced by the flowers. 4. Exposure to ethylene decreased fresh weight, flower diameter, and water uptake of carnations. 5. The floral preservative extended vase life markedly by inhibiting ethylene production of cut flowers. The flowers exposed to lots of ethylene, however, were not restored even though they were held in the preservative solution.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.645-648
• /
• 2010

A new spray carnation cultivar 'Lyra' was released by the National Institute of Horticultural and Herbal Science in 2003. A cross was made between spray cultivar 'Ballantyne' and red spray cultivar 'Chateau' in 1999. After investigation of the characteristics during four years (from 2000 to 2003), the cultivar 'Lyra' was finally selected in 2003. 'Lyra' is a spray cultivar with bright pink color for a cut flower. The main characteristics are early flowering, multi branching, fragrance and long flower stalk. Also, it has medium resistance to Fusarium wilt and 7 days vase life. To avoid calyx splitting caused by high temperature, it is recommended that this cultivar be grown over $8^{\circ}C$ at night and under $25^{\circ}C$ at day time during a flower bud differentiation period and applied with additional nitrate fertilization ($30.0kg{\cdot}10^{-1}$).

• Journal of People, Plants, and Environment
• /
• v.23 no.2
• /
• pp.171-178
• /
• 2020

The present study was conducted to determine the effects of electron beam irradiation on the postharvest quality of cut flowers. Cut flowers were irradiated with electron beam at 100, 200, 400, 600, 800, 1,000, and 2,000 Gy with a 10 MeV linear electron beam accelerator to evaluate their irradiation tolerance. Postharvest quality was determined by monitoring fresh weight loss, flower longevity, flower diameter, flowering rate, visual quality of flowers and leaves, and chlorophyll content. Cut flowers showed a radiation-induced damage with increasing the irradiation dose. Flower longevity and fresh weight of cut flowers decreased when the irradiation dose was increased. Flower bud opening was also inhibited in a dose-dependent manner. The effective irradiation doses for 10% reduction of postharvest quality (ED₁₀) values were 144.4, 451.6, and 841.2 Gy in the 'Medusa' lily, 'Montezuma' carnation, and 'Rosina White' eustoma, respectively. Although tolerance of cut flowers to electron beam irradiation vary according to species, cultivars, or maturity stage conditions, it is conceivable that 'Montezuma' carnation and 'Rosina White' eustoma could be tolerated and maintained overall postharvest quality up to 400 Gy, the generic irradiation dose approved by the Animal and Plant Health Inspection Service (APHIS) and the International Plant Protection Convention (IPPC) for postharvest phytosanitary treatments.

• Journal of Plant Biotechnology
• /
• v.5 no.2
• /
• pp.69-77
• /
• 2003

The ornamental industry encompasses cut flower, pot plant, turfgrass and nursery stock production and is an important part of the agricultural sector. As internationally traded commodities, cut flowers and plants are an integral part of the economy of a number of developing countries in South America, the Caribbean and Africa. Genetic modification (GM) is a tool with great potential to the ornamental horticulture industry. The rapid progress in our knowledge of plant molecular biology can accelerate the breeding ornamental plants using recombinant DNA technology techniques. Not only is there the possibility of creating new, novel products the driver of the industry but also the potential to develop varieties requiring less chemical and energy inputs. As an important non-food agricultural sector the use of genetically modified (GM) ornamental crops may also be ideal for the intensive farming necessary to generate pharmaceuticals and other useful products in GM plants. To date, there are only a few ornamental GM products in development and only one, a carnation genetically modified for flower colour, in the marketplace. International Flower Developments, a joint venture between Florigene Ltd. in Australia and Suntory Ltd. of Japan, developed the GM carnations. These flowers are currently on sale in USA, Japan and Australia. The research, development and commercialization of these products are summarized. The long term prospects for ornamental GM products, like food crops, will be determined by the regulatory environment, and the acceptance of GM products in the marketplace. These critical factors will be analysed in the context of the current legislative environment, and likely public and industry opinion towards ornamental genetically modified organisms (GMO's).

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.245-247
• /
• 2011

A new spray carnation cultivar 'Leo' was released by the National Institute of Horticultural and Herbal Science in 2003. A cross was made between spray cultivar 'Ballantyne' and 'West peachy' in 1999. After investigation of the characteristics four years (from 2001 to 2003), it was finally selected in 2003. 'Leo' is a spray cultivar with light yellow color for a cut flower. The main characteristics are multi branching, long vase life and early flowering habit than 'Diamond'(control). It has medium resistance to Fusarium wilt and 9 days vase life.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2003.04a
• /
• pp.39-48
• /
• 2003

The ornamental industry encompasses cut flower, pot plant, turfgrass and nursery stock production and is an important part of the agricultural sector. As internationally traded commodities, cut flowers and plants are an integral part of the economy of a number of developing countries in South America, the Caribbean and Africa. Genetic modification (GM) is a tool with great potential to the ornamental horticulture industry. The rapid progress in our knowledge of plant molecular biology can accelerate the breeding ornamental plants using recombinant DNA technology techniques. Not only is there the possibility of creating new, novel products the driver of the industry but also the potential to develop varieties requiring less chemical and energy inputs. As an important non-food agricultural sector the use of genetically modified (GM) ornamental crops may also be ideal for the intensive farming necessary to generate pharmaceuticals and other useful products in GM plants. To date, there are only a few ornamental GM products in development and only one, a carnation genetically modified for flower colour, in the marketplace. International Flower Developments, a joint venture between Florigene Ltd. in Australia and Suntory Ltd.of Japan, developed the GM carnations. These flowers are currently on sale in USA, Japan and Australia. The research, development and commercialisation of these products are summarised. The long term prospects for ornamental GM products, like food crops, will be determined by the regulatory environment, and the acceptance of GM products in the marketplace. These critical factors will be analysed in the context of the current legislative environment, and likely public and industry opinion towards ornamental genetically modified organisms (GMO's).

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.190-197
• /
• 1997

This study was conducted to determine the optimum hydroponic system and nutrient solution for promoting the growth and flowering of hydroponically grown carnation. DFT (deep flow technique) and NFT (nutrient film technique) systems were employed and four kinds of nutrient solution, which are Cooper solution, Yamasaki solution, balanced nutrient solution by Japanese Horticultural Experiment Station and PTG solution in the Netherlands were used and compared. pH was lowest in the PTG solution compared to the other nutrient solutions used. Plant height was highest in the DFT system in the plot of PTG solution as of 53.0 cm at 88 days after transplanting, while lowest in NFT system with Cooper solution. Stem diameter was more thickened in NFT system with PTG solution as of 7.2 mm at 88 days after transplanting. Days to flowering was shortened to 122.3 days in NFT system when PTG solution was used. This results suggested a combination of NFT system with PTG solution as optimum hydroponic system and nutrient solution for cut carnation production. Further trials as to the management of nutrient solution by glowing stages should be followed.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.6
• /
• pp.369-374
• /
• 1997

Immature flower buds of 'Desio' carnation were cultured on MS agar medium supplemented with 1 ㎎/L 2,L-D. Embryogenic calli were formed from 5-10% of the buds less than 20 ㎜ in length, but only non-embryogenic calli were produced from explants of shoot apex leaf, internode, and flowere buds larger than 20 ㎜. The same method was applied to 16 cultivars of cut Sower carnation and embryogenic calli were obtained in 7 cultivars. Several embryogenic callus lines were selected and maintained through subcultures over 120 weeks without loss of embryogenic competence. The embryogenic cultures were also proliferated rapidly in liquid agitation cultures using MS medium supplemented with 1mg/L 2,4-D. Numerous embryos were formed on the periphery of the cell aggregates upon transfer to auxin-free MS agar medium. Plantlets were transplanted in potting soil and grown to bloom in six months.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.90-92
• /
• 2012

A new spray carnation 'Lepus' was released by the National Institute of Horticultural & Herbal Science in 2004. This hybrid was crossed between 'Diamond' and '99257-7 Line' in 2000. The 269 seedling plants were, planted and cultivated in green house. After investigation of the characteristics for four years (from 2001 to 2004), it was finally selected in 2004. 'Lepus' white color with red peak edge is spray type and strong flower stalks. Also, it has medium fragrance, many flowers, and attractive flower arrangement. In particular, flowering was 10 days early and flower stalk was 13cm longer than 'Diamond' (control). In addition, it has medium resistance of Fusarium and the vase life was similar to 'Diamond'.