• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.1-16
• /
• 2002

The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.

• Journal of the Korean Society of Costume
• /
• v.51 no.7
• /
• pp.123-134
• /
• 2001

The purpose of this study to compare the purchasing behaviour of men's business suits, among custom suits, system order, and ready-made suits, centering around the choice of information source, risk perception and benefits sought. The survey of this study was collected from 450 adult male in Seoul. The data was analyzed by factor analysis and ANOVA. The result of this study were as follows : 1. Custom suits, system order, and ready-made suits consumers have a significant difference in the choice of information source. The consumer attaching most importance to the impersonal information source is the system order users, custom suits users, and ready-made suits users respectively. However there was no significant difference in the personal source among 3 different purchasing behaviour of men's suits. 2. For the risk perception, 1) the group who perceived the highest in economic risk is the system order users, followed by custom suits users, and ready-made suits users. 2) the group who perceived performance risk as being the highest concern is the ready-made suits consumers, followed by system order user, and custom suits user. 3) the group who perceived the socio-psychological risk as the highest is the ready-made suits consumers, and followed by custom suits user and system order users. 4) there is no difference among the three groups with respect to the fashionability loss risk. 5) the group of the highest perceiving the useful loss risk is the ready-made suits consumers, and the next is system order users, custom suits users. 6) the group of the highest perceiving the time and convenience loss risk is ready-made suits users, and the next is system order users, custom suits users. 3. For the benefit sought, the group of the highest perceiving the aesthetics is custom suits consumers, and the next is system order users, ready-made suits users.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.11
• /
• pp.89-95
• /
• 2015

In this paper, we propose the method and development of custom-made golf insole recommender system to optimize the foot balance during golf swing. This system development procedures are as follows : (1) Using the measured data of the golf swing, the analysis of the individual golf hitting and balance will be done. (2) Based on the analysis results, the system will recommend the golf custom-made insole to optimize the individual balance using recommender algorithm. (3) After the golf custom-made insole is recommended, the modeling and design of the recommended insole is processed. Golf custom-made insole will be possible to reduce the excessive shaking and increase the lower-body supporting force. Therefore, we have expected that the recommended insole will improve the swing results through the optimization of golf swing balance. In the future, it is necessary to secure the higher validity and reliability through the more diverse experiments and research.

• The Korean Journal of Community Living Science
• /
• v.24 no.4
• /
• pp.471-483
• /
• 2013

The study aimed to investigate the wearing & purchase practices with shirts and analyze the group differences on the shirt size, BMI & perceived body type. Total usable questionnaires were obtained from 350 male office workers aged from 20 to 49 in Seoul. Results were gained from the statistical analysis such as factor analysis, ANOVA, t-test using SPSS 21.0. The results were as follows. First, male office workers had difficulty in choosing the right size among the different sizes of ready-made shirts and had trouble in vexatious order & high price for custom-made shirts, however, they had an emphasis on design and size for the 2 kinds of shirts in common. Second, the groups by shirt size, BMI, perceived body type showed significant differences in shirt fitness and shirt wearing methods of ready-made shirts but showed no difference in purchase intention of custom-made shirts. Fatness and body type were proved to be important for wearing shirts and it was assumed that there were socio-psychological reasons for the custom-made shirt purchase. Finally, the groups by the experience of purchasing custom-made shirts showed no difference in shirt fitness and shirt wearing methods of ready-made shirts but showed difference in purchase intention of custom-made shirts. This meant that purchase of a custom-made shirt stimulated another purchase. Therefore, shirt brands should focus on the first purchase of custom-made shirts.

• Journal of International Society for Simulation Surgery
• /
• v.1 no.1
• /
• pp.13-15
• /
• 2014

Nowadays, with advanced 3D printing techniques, the custom-made implant can be manufactured for the patient. Especially in skull reconstruction, it is difficult to design the implant due to complicated geometry. In large defect, an autograft is inappropriate to cover the defect due to donor morbidity. We present the process of manufacturing the 3D custom-made implant for skull reconstruction. There was one patient with skull defect repaired using custom-made 3D titanium implant in the plastic and reconstructive surgery department. The patient had defect of the left parieto-temporal area after craniectomy due to traumatic subdural hematoma. Custom-made 3D titanium implants were manufactured by Medyssey Co., Ltd. using 3D CT data, Mimics software and an EBM (Electron Beam Melting) machine. The engineer and surgeon reviewed several different designs and simulated a mock surgery on 3D skull model. During the operation, the custom-made implant was fit to the defect properly without dead space. The operative site healed without any specific complications. In skull reconstruction, autograft has been the treatment of choice. However, it is not always available and depends on the size of defect and donor morbidity. As 3D printing technique has been advanced, it is useful to manufacture custom-made implant for skull reconstruction.

• Fashion & Textile Research Journal
• /
• v.20 no.5
• /
• pp.556-568
• /
• 2018

In this study, we surveyed the current status and sizing system of the custom dress shirts sold through online shopping, compared with the sizing system of the ready-made dress shirts. We tried to collect the information needed to make the well fitted dress shirts for middle-aged men from this study. The 17 online custom dress shirt brands were selected and the sales type, sales price, design options and size options of each brand were analyzed. The sizing systems of online custom dress shirt brands were compared with the sizing system of the 10 ready made dress shirt brands. The result showed that online custom dress shirts brands offered a variety of design options and size options to meet the consumers' individuality, taste and demand for good fit. In the ready-made brands, all 10 brands were using the same size notation system. In the same size designation, the difference in product size among the ready-made brands showed a tendency to be smaller than the online custom brands. The online custom brands had the different size notation system among brands. The size notation, the number of size designation and the size interval were different for each brand. Also, in the online custom brands, the product size among brands differed from each other in the same size designation. Therefore, the standardized size information and sizing system for middle-aged men that could be used as criteria when making the product size and pattern design in online custom brands were needed.

• Korean Journal of Bronchoesophagology
• /
• v.16 no.2
• /
• pp.131-137
• /
• 2010

Background: Montgomery T-tube is widely used to maintain airway in many cases. Market-available tubes are not always fit to the trachea of each patient and need some modification such as trimming. Complications do happen in prolonged use like tracheostomy tubes. To overcome above limitations, we designed custom-made T-tube using CT data with the aid of 3D reconstruction software. Material and Method: Boundaries were extracted from neck CT data of normal person and processed by surface rendering methods. Real laryngotracheal model and tracheal inner surface-mimicking tube model were made with plaster and rubber. The main tube was designed by accumulation of circles or simple closed curves made from boundaries. Stomal tube was made by accumulation of squares due to limitation of software. Measurement data of tracheal lumen were used to custom-made T-tubes. Tracheal lumen residing portion (vertical limb) was made like circular cylinder or simple closed curved cylinder. Stomal portion (horizontal limb) was designed like square cylinder. Results: Custom made T-tube with cylindric vertical limb and horizontal limb of square cylinder was designed. Conclusion: CT data was helpful in making custom made T-tube with 3D reconstruction technique. If suitable materials are available, commercial T-tube can be printed out from 3D printers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.276-283
• /
• 2013

Purpose: The purpose of this study was to investigate the fit and screw joint stability between Ready-made abutment and CAD-CAM custom-made abutment. Materials and methods: Osstem implant system was used. Ready-made abutment (Transfer abutment, Osstem Implant Co. Ltd, Busan, Korea), CAD-CAM custom-made abutment (CustomFit abutment, Osstem Implant Co. Ltd, Busan, Korea) and domestically manufactured CAD-CAM custom-made abutment (Myplant, Raphabio Co., Seoul, Korea) were fabricated five each and screws were provided by each company. Fixture and abutments were tightening with 30Ncm according to the manufacturer's instruction and then preloding reverse torque values were measured 3 times repeatedly. Kruskal-Wallis test was used for statistical analysis of the preloading reverse torque values (${\alpha}=.05$). After specimens were embedded into epoxy resin, wet cutting and polishing was performed and FE-SEM imaging was performed, on the contact interface. Results: The pre-loading reverse torque values were $26.0{\pm}0.30Ncm$ (ready-made abutment; Transfer abutment) and $26.3{\pm}0.32Ncm$ (CAD-CAM custom-made abutment; CustomFit abutment) and $24.7{\pm}0.67Ncm$ (CAD-CAM custom-made abutment; Myplant). The domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) presented lower pre-loading reverse torque value with statistically significant difference than that of the ready-made abutment (Transfer abutment) and CAD-CAM custom-made abutment (CustomFit abutment) manufactured from the same company (P=.027) and showed marginal gap in the fixture-abutment interface. Conclusion: Within the limitation of the present in-vitro study, in domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) showed lower screw joint stability and fitness between fixture and abutment.

• The International Journal of Costume Culture
• /
• v.8 no.2
• /
• pp.97-104
• /
• 2005

In this research, the fit of basic dresses was examined, by analyzing and comparing the satisfaction of fitness of basic dresses made by the draping method on a custom-made replica body form and that of a basic dress made by the flat pattern method. Basis dresses were produced by the draping method for each 52 subjects using custom-made body forms, and another kind basic dresses for each subjects were produced by the flat pattern method using measurements of body sizes. Both basic dresses received high scores for the satisfaction of fit, but the basic dresses produced by draping method received higher scores. Thus it is expected to produce a more successful fit by draping a basic dress on a custom-made body form. Future research using more subjects might confirm these results. A more concrete analysis through using additional satisfaction tests could be conducted. For example, each subject might also serve as an evaluator to rate her satisfaction of fit wearing each of the two custom-made dresses. Finally, examining various body forms is suggested.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.2
• /
• pp.71-86
• /
• 2002

This study's purpose is to gain basic data for the factory automation of manufacturing custom-made girdles. For this study , obese women in their 30s and 40s was experimented through direct measuring and by the 3D scanner, by means of which the proportions of the subject's body was measured. Based upon the results of this experiment, individually designed girdles were made. In order to gain the basic data for the factory automation of manufacturing custom-made girdles, the patterns and the clothing pressure and the feeling of wearing such girdles were analyzed. This study can be summarized as follows: The material properties and the designs of existing functional girdles in the market were studied thoroughly, and the subject were required to wear those existing girdles. On the basis of this result, the experimental girdles were designed and produced which could serve well the subject's intension. The experimental girdles were of the basic long-type in order to apply to all sorts of girdles, and they were produced according to the style and pattern of the existing grading system. The second experiment was conducted by applying the subject's body measurements. Due to the elasticity of the material, in girdles the smaller measurements were to be used in this second experiment were: 80% of waist size, 84% of the hip and 85% of the thigh. To determine the length of the girdles, the same measurements were applied. The test results of the feeling of wearing the experimental girdles showed that the second, custom-made experimental girdles were better. According to the test results of the clothing pressure, the second experimental girdles(custom-made girdles) marked the higher pressure than the first on every part of the body, especially on the hips and thighs. Thus, it can be said that the second experimental girdles are better than the first in lifting up the hips. It is expected that the design methods developed in this study can be utilized as basic resources for the factory automation system of manufacturing custom-made girdles.