• 대한치과교정학회지
• /
• 제25권2호
• /
• pp.153-163
• /
• 1995

본 연구는 III급 부정 교합을 판별하는데 있어, 수평 부조화의 진단에 이용되는 여러 진단 항목들의 진단학적 효율과 타당성을 ROC analysis로 비교하는데 그 목적이 있다. ROC(Receiver Operating Characteristic) analysis는 연속적으로 변하는 cut-off value에서의 sensitivity와 1-specificity에 의해 그려지는 곡선으로서 진단 방법의 타당성을 결정하고, 여러 진단 방법들을 비교하는 분석법으로 알려져 있다. 부정교합자 496명을 대상으로 측모 두부 X-선 계측사진과 진단모형을 이용하여, 진단모형 계측을 통해 부정교합군을 분류하였으며, 이중 III급 부정 교합자는 245명이었다. 측모 두부 X-선계측사진에서 16개의 계측항목을 선정하였으며, 이 계측항목들과 III급 부정교합의 관계를 알아보고자 각도 계측항목에서는 $1^{\circ}$ 간격으로, 선계측항목에서는 1mm의 간격으로 sensitivity와 specificity를 구해 ROC curve를 그렸다. 그리고, 이 계측항목들의 직접적인 비교를 위해 ROC curve 아래의 면적을 계산해냈다. 결과는 다음과 같다. 1. III급 부정교합을 판별하는데 있어, "Wits" appraisal이 다른 계측 항목에 비해 더 나은 진단 효율을 보였다. 2. AB plane angle, ANB angle, App-Bpp distance, AF-BF distance, APDI, N perpendicular to A 와 Pog to N perpendicular의 차이, maxillomandibular differential도 높은 진단 가치를 보였다. 3. 하악골의 위치를 평가하는 계측항목은 중정도의 진단 효율을 보였다. 4. 상악골에 대한 계측항목은 III급 부정교합의 판별에 대한 진단 가치가 낮았다.

• 대한치과보철학회지
• /
• 제42권4호
• /
• pp.356-372
• /
• 2004

Statement of problom: In the internal connection system the loading transfer mechanism within the inner surface of the implant and also the stress distribution occuring to the mandible can be changed according to the abutment form. Therefore it is thought to be imperative to study the difference of the stress distribution occuring at the mandible according to the abutment form. Purpose: The purpose of this study was to assess the loading distributing characteristics of 3 implant systems with internal connection under vertical and inclined loading using finite element analysis. Material and method: Three finite element models were designed according to the type of internal connection of ITI(model 1), Friadent(model 2), and Bicon(model 3) respectively. This study simulated loads of 200N in a vertical direction (A), a $15^{\circ}$ inward inclined direction (B), and a $30^{\circ}$ outward inclined direction (C). Result: The following results have been made based on this numeric simulations. 1. The greatest stress showed in the loading condition C of the inclined load with outside point from the centric cusp tip. 2. Without regard to the loading condition, the magnitudes of the stresses taken at the supporting bone, the implant fixture, and the abutment were greater in the order of model 2, model 1, and model 3. 3. Without regard to the loading condition, greater stress was concentrated at the cortical bone contacting the upper part of the implant fixture, and lower stress was taken at the cancellous bone. 4. The stress of the implant fixture was usually widely distributed along the inner surface of the implant fixture contacting the abutment post. 5. The stress distribution pattern of the abutment showed that the great stress was usually concentrated at the neck of the abutment and the abutment post, and the stress was also distributed toward the lower part of the abutment post in case of the loading condition B, C of the inclined load. 6. In case of the loading condition B, C of the inclined load, the maximum von Misess stress at the whole was taken at the implant fixture both in the model 1 and model 2, and at the abutment in the model 3. 7. The stress was inclined to be distributed from abutment post to fixture in case of the internal connection system. Conclusion: The internal connection system of the implant and the abutment connection methods, the stress-induced pattern at the supporting bone, the implant fixture, and the abutment according to the abutment connection form had differenence among them, and the stress distribution pattern usually had a widely distributed tendency along the inner surface of the implant fixture contacting the a butment post.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.291-316
• /
• 1993

Restorative procedures can lead to tooth fracture due to the relatively small amount of the remaining tooth structure. It is essential to prevent fractures by having a clear concept of the designs for cavity preparations. Among the several parameters in cavity designs, profound understanding of isthmus width factor would facilitate selection of the appropriate cavity preparation for a specific clinical situation. In this study, MO amalgam cavity were prepared on maxillary first premolar and filled with amalgam. Three dimensional, model with 1365 8-node brick elements was made by serial photographic method. In this model, isthmus was varied in width at 1/4, 1/3, 1/2 and 2/3 of intercuspal width and material properties were given for three element groups, i.e., enamel, dentin and amalgam. A load of 500 N was applied vertically on amalgam and enamel. In case of enamel loading, 2 model (with and without amalgam) was compared to consider the possibility of play at the interface between tooth material and amalgam. These models were analyzed with three dimensional finite element method. The results were as follows: 1. The stress was concentrated on the facio-pulpal line angle and distal marginal ridge of the cavity. 2. With the increase of the isthmus width, the stress spread around the facio-pulpal line angle and the area of stress concentration moved toward the proximal box. 3. In case of narrow isthmus width, the initiation point of crack would be in the area of isthmus corner of the cavity, and with the increase of the isthmus width, it would move toward the proximal box and at the same time the possibility of crack increase at the distal marginal ridge. 4. The direction of crack progressed outward and downward from the facio-pulpal line angle, and with the increase of the isthmus width, it approximated vertical direction. At the marginal ridge, it occurred in vertical direction. 5. It would be favorable to make the isthmus width narrower than a third of the intercuspal width, and to cover the cusp if isthmus width were wider than half of the intercuspal width. 6. It is necessary to apply the possibility of play to the finite element analysis.

• Restorative Dentistry and Endodontics
• /
• 제31권5호
• /
• pp.359-370
• /
• 2006

본 연구의 목적은 네 가지 형태의 비우식성 치경부 병소에 과다한 교합하중을 가했을 때 각 와동에 나타나는 응력 분포를 3차원적으로 조사하고자 하였다. 임상적으로 많이 관찰되는 다양한 형태의 병소 중 4가지 형태의 서로 다른 병소를 대표적으로 선택하여 발치된 상악 제2소구치에 3차원 유한요소 모형을 제작하였다. 형성된 모형에 협측교두와 설측교두에 500 N의 하중을 가한 후 치경부병소 첨부와 수직 절단면의 주 응력을 분석하여 다음과 같은 결과를 얻었다. 1 서로 다른 네 가지 형태의 와동에서 응력분포 양상은 비슷했지만 응력의 크기가 서로 달랐다. 2. 최대치 응력은 근심협측 우각부에서 나타났으며, 또한 병소의 첨부에 응력의 집중을 보였다. 3. 하중 A에서는 주된 응력이 압축 응력이었고 하중 B에서는 주된 응력이 인장 응력이었다. 4. 이러한 하중 하에서 수복치료를 하지 않으면 와동의 크기는 점차 커지고 치아구조에는 유해하게 작용하리라 생각된다.

• 대한치과보철학회지
• /
• 제40권6호
• /
• pp.545-559
• /
• 2002

There has been increasing use of IPS Empress $2^{(R)}$ owing to easy fabrication method, high esthetics similar to natural teeth, good marginal accuracy, and sufficient fracture strength. However, in clinical application, although a luting agent and the tooth cementation bonding procedure influence the marginal accuracy and fracture strength restoration, there has been a controversy in the selection of proper luting agent. This study was to measure the marginal fidelites and fracture strength of IPS Empress crowns according to three cement types, Protec $cem^{(R)}$, Variolink $II^{(R)}$ and Panavia $21^{(R)}$. After construction of 12 experimental dies for each group, IPS Empress $2^{(R)}$ crowns were fabricated and luted the metal master die prepartion of the maxillary right premolar. Marginal gaps before cementation and after cementation were measured. Buccal incline on the functional cusp of specimens were loaded until the catastrophic failure and fracture strength was measured. The results of this study were as follows: 1. The range of gap was $34.04{\pm}4.84{\mu}m$ before cementation and $37.88{\pm}5.00{\mu}m$ after cementation, which showed significant difference by paired t-test (p<0.05). The difference in the results from marginal accuracy according to measuring point proved to be not statistically significant by two-way ANOVA test (p>0.05). 2. The difference in the results from marginal accuracy according to three cement types Proved that The Variolink $II^{(R)}$ cement group had the least gap, $35.43{\pm}5.03{\mu}m$, and showed superior marginal accuracy while there existed statistic significance in Protec $cem^{(R)}$ cement group, $39.06{\pm}4.41{\mu}m$ or Panavia $21^{(R)}$ cement group, $39.16{\pm}4.39{\mu}m$ by two-way ANOVA test & multiple range test (p<0.05). 3. The difference in the results from fractures strength testing according to three cement type groups proved to be statistically significant (p<0.05). The Variolink $II^{(R)}$ cement group shows highest fracture strength of $1257.33{\pm}226.77N$, Panavia $21^{(R)}$ cement group has $1098.08{\pm}138.45N$, and Protec $cem^{(R)}$ cement group represents the lowest fracture strength of $926.75{\pm}115.75N$. 4. Three different cement groups of different components showed acceptable marginal fidelity and fracture strength. It is concluded that IPS Empress $2^{(R)}$ crowns luted using Variolink $II^{(R)}$ cement group had stronger fracture strength and smaller marginal gap than the other cement groups. Although Variolink $II^{(R)}$ resin cement seemed acceptable to clinical applications in IPS Empress $2^{(R)}$ system, the IPS Empress $2^{(R)}$ system still requires long-term research due to the lack of data in clinical applications.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권4호
• /
• pp.350-359
• /
• 2005

Sagittal split ramus osteotomy(SSRO) has been commonly performed in the mandibular prognathism. The previous studies of the mandibular anatomy for SSRO have mostly been used in dry skull without consideration of age, sex or jaw relationship of patients. This study was performed to evaluate the location of mandibular canal and the anatomy of ramus, such as the location of mandibular lingula and the ramal bone marrow, which were associated with SSRO procedures, in the patients with mandibular prognathism and normal young adults by using computerized tomographs(CT) and 3D images. The young adults at their twenties, who were considered to complete their skeletal growth, and seen in the Department of Orthodontics and Oral and Maxillofacial Surgery in Chonnam National University Hospital between March 2000 and May 2003, were selected. This study was performed in 30 patients (15men, 15women) who were diagnosed as skeletal class I normal relationship, and another 30 patients (15men, 15women) who were diagnosed as skeletal class III relationship upon clinical examination and lateral cephalometric radiographs. The patients were divided into 2 groups : Class I group, the patients who had skeletal class Ⅰ normal relationship(n=30, 15men, 15women), and Class III group, the patients who had skeletal class III relationship(n=30, 15men, 15women). Facial CT was taken in all patients, and pure 3D mandibular model was constructed by V-works version 4.0. The occlusal plane was designed by three points, such as the mesiobuccal cusp of both mandibular 1st molar and the incisal edge of the right mandibular central incisor, and used as a reference plane. Distances between the tip of mandibular lingula and the occlusal plane, the sigmoid notch, the anterior and the posterior borders of ramus were measured. The height of ramal bone marrow from the occlusal plane and the distance between mid-point of mandibular canal and the buccal or lingual cortex of the mandible in the 1st and 2nd molars were measured by V-works version 4.0. Distance(Li-OP) between the occlusal plane and the tip of mandibular lingula of Class III Group was longer than that of Class I Group in men(p<0.01), but there was no significant difference in women between both groups. Distance(Li-SN) between the sigmoid notch and the tip of mandibular ligula of Class III group was longer than that of Class I Group in men(p<0.05), but there was no significant difference in women between both groups. Distance(Li-RA) between the anterior border of ramus and the tip of mandibular lingula of Class III Group was shorter than that of Class I Group in men and women(p<0.01). Distance(Li-RP) between the posterior border of ramus and the tip of mandibular lingula of Class III Group was slightly shorter than that of Class I Group in men(p<0.05), but there was no significant difference in women between both groups. Distance(RA-RP) between the anterior and the posterior borders of ramus of Class III Group was shorter than that of Class I Group in men and women(p<0.01). Longer the distance(SN-AN) between the sigmoid notch and the antegonial notch was, longer the vertical ramal length above occlusal plane, higher the location of mandibular lingula, and shorter the antero-posterior ramal length were observed(p<0.01). Height of ramal bone marrow of Class III Group was higher than that of Class I Group in men and women(p<0.01). Distance between mandibular canal and buccal cortex of Class III Group in 1st and 2nd lower molars was shorter than that of Class I Group in men and women (p<0.05 in 1st lower molar in men, p<0.01 in others). These results indicate that there are some anatomical differences between the normal occlusal patients and the mandibular prognathic patients, such as the anterior-posterior length of ramus, the height of ramal bone marrow, and the location of mandibular canal.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
• /
• pp.246-257
• /
• 2008

이 연구의 목적은 3차원 유한요소분석법을 사용하여 교합력의 위치와 방향이 상악 제2소구치의 치경부 복합레진 수복물의 응력분포에 미치는 영향에 대해 평가해 보고자 하였다. 발치된 상악 제2소구치를 이용하여 micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium)로 스캔한 후 HyperMesh Ver 6.0 (Altair Engineering, Inc., Troy, USA)와 3D-DOCTOR (Able Software Co., Lexington, MA, USA)로 3차원 유한요소 모형을 제작하였다. 제작된 소구치 모형에 쐐기형 와동을 형성하고 탄성계수가 서로 다른 혼합형 복합레진과 흐름성 복합레진으로 각각 수복하였다. 수복 후 설측교두의 협측사면 세 위치에 각각 수직, 20도, 40도의 각도로 하중을 가한 후 응력분포를 ANSYS Ver 9.0 (Swanson Analysis Systems. Inc., Houston, USA) 프로그램을 이용하여 인장 응력의 분포를 분석한 바 하중 위치와 관계없이 하중방향의 각도가 증가할수록, 또한 수복재료의 탄성 계수가 높을수록 인장응력도 증가하는 것으로 보아 교합력의 방향과 수복재료의 탄성계수가 치경부 수복물의 응력분포에 중요한 영향을 미치는 요소로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제33권3호
• /
• pp.246-257
• /
• 2008

이 연구의 목적은 3차원 유한요소분석법을 사용하여 교합력의 위치와 방향이 상악 제2소구치의 치경부 복합레진 수복물의 응력분포에 미치는 영향에 대해 평가해 보고자 하였다. 발치된 상악 제2소구치를 이용하여 micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium)로 스캔한 후 HyperMesh Ver 6.0 (Altair Engineering, Inc., Troy, USA)와 3D-DOCTOR (Able Software Co., Lexington, MA, USA)로 3차원 유한요소 모형을 제작하였다. 제작된 소구치 모형에 쐐기형 와동을 형성하고 탄성계수가 서로 다른 혼합형 복합레진과 흐름성 복합레진으로 각각 수복하였다. 수복 후 설측교두의 협측사면 세 위치에 각각 수직, 20도, 40도의 각도로 하중을 가한 후 응력분포를 ANSYS Ver. 9.0 (Swanson Analysis Systems. Inc., Houston, USA) 프로그램을 이용하여 인장 응력의 분포를 분석한 바 하중 위치와 관계없이 하중방향의 각도가 증가할수록, 또한 수복재료의 탄성계수가 높을수록 인장응력도 증가하는 것으로 보아 교합력의 방향과 수복재료의 탄성계수가 치경부 수복물의 응력분포에 중요한 영향을 미치는 요소로 사료된다.

• 구강회복응용과학지
• /
• 제37권3호
• /
• pp.130-137
• /
• 2021

목적: 다양한 봉합술을 통해 임플란트 주변에 최적화된 각화점막을 확보하려는 시도가 진행되었다. 본 연구의 목적은 임플란트 식립 후 2개의 서로 다른 봉합술 시행 후 연조직의 치유 양상을 평가하는 것이다. 연구 재료 및 방법: 15명의 환자에서 18개의 임플란트가 식립되었고 연구에 포함되었다. 부가적인 골이식 없이 단순 임플란트 식립만 진행하였다. 2개의 서로 다른 봉합술을 이용해 paramarginal flap design을 시행한 협측 판막을 임플란트 치유 지대주 하방으로 고정하였다. 디지털 구내 스캐너를 이용하여 초진, 수술 직후, 발사, 3개월 시점에 스캔을 진행하였다. 각 시점에 따른 스캔 데이터를 인접치의 교두, 소와, 치유지대주 등의 여러 점들을 기준으로 초진 데이터와 중첩하였다. 각 시점의 스캔 데이터를 초진 데이터와 subtraction한 다음 임플란트 주위 연조직의 증가량에 해당하는 폐곡면의 부피를 측정하였다. 폐곡면의 부피는 mm³ 단위로 계측하였다. 3개 시점에서 2개의 서로 다른 봉합술에 의한 부피 변화를 비교하기 위해 nonparametric rank-based 분석을 시행하였다. 결과: 양쪽 군 모두 치유는 양호하였다. 양쪽 봉합군은 수술 후 즉시 연조직 부피의 증가를 보여주었다. 3개월에 걸쳐 부피는 시간에 따라 유의성 있게 감소하였다(P < 0.001). Flap folding suture 군의 연조직 부피는 3개월 시점에서 interrupted suture 군보다 더욱 높은 중앙값을 보였으나 통계적 유의성은 없었다(P > 0.05). 결론: 임플란트 시행 시 paramarginal flap 형태로 거상된 판막을 flap folding suture로 고정한 군은 3개월 치유 기간 후 interrupted suture 군보다 더욱 높은 연조직 증강 수치를 보였다. 하지만 좀더 장기적인 관찰 연구가 필요할 것으로 사료된다.