• Structural Engineering and Mechanics
• /
• 제36권6호
• /
• pp.679-695
• /
• 2010

In-plane vibrations of slightly curved beams having cracks are investigated numerically and experimentally. The curvature of the beam is circular and stays in the plane of vibration. Specimens made of steel with different lengths but with the same radius of curvature are used in the experiments. Cracks are opened using a hand saw having 0.4 mm thickness. Natural frequencies depending on location and depth of the cracks are determined using a Bruel & Kjaer 4366 type accelerometer. Then the beam is assumed as a Rayleigh type slightly curved beam in finite element method (FEM) including bending, extension and rotary inertia. A flexural rigidity equation given in literature for straight beams having a crack is used in the analysis. Frequencies are obtained numerically for different crack locations and depths. Experimental results are presented and compared with the numerical solutions. The natural frequencies are affected too much due to larger moments when the crack is around nodes. The effect can be neglected when it is at the location of maximum displacements. When the crack is close to the clamped end, the decrease in the frequencies in all modes is very high. The consistency of the results and validity of the equations are discussed.

• 한국강구조학회 논문집
• /
• 제14권3호
• /
• pp.423-432
• /
• 2002

비대칭 박벽단면을 갖는 곡선보의 자유진동해석을 수행할 수 있는 엄밀해 및 유한요소 이론을 제시한다. 단순지지된 일축대칭 박벽단면을 갖는 곡선보의 면내 자유진동 모드에 대응하는 엄밀해를 산정하였으며, 곡섬보를 유한요소로 분할하여 요소의 변위장을 요소의 변위벡터의 대하여 축방향 신장조건에서는 3차 그리고 비신장조건에서는 5차의 Hermitian 다항식으로 나타내고, 이를 운동방정식에 대입함으로써 탄성강성행렬과 질량행렬을 유도한다. 또한 본 연구에서 얻어진 엄밀해와 곡선보요소를 이용한 유한요소 해석결과를 ABAQUS 쉘요소를 이용하여 얻어진 결과와 비교 검토함으로써 본 연구의 타당성을 입증한다. 특히 곡선보의 축방향 비신장조건과 두께-곡률효과가 동적거동에 미치는 영향을 조사한다.

• 한국전산구조공학회논문집
• /
• 제22권5호
• /
• pp.453-462
• /
• 2009

미분구적법을 이용하여 전단변형을 고려하지 않은 단면적이 변하는 곡선 보의 면내 자유진동을 해석하였다. 다양한 경계조건 및 굽힘 각에 따른 진동수를 계산하였고, 그 결과를 다른 수치해석들과 비교하였다. 미분구적법은 비교적 적은 요소를 사용하고도 정확한 해석결과를 보여주었고, 수정된 결과를 추가적으로 제시하였다.

• Structural Engineering and Mechanics
• /
• 제15권1호
• /
• pp.151-157
• /
• 2003

A new approach to the analysis of horizontally curved beams is presented in this paper. The proposed method simplifies a two-dimensional structure into a one-dimensional structure just like a normal beam for structural analysis and, therefore, reduces the computational effort significantly.

• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.589-604
• /
• 2005

To overcome the drawback of currently available curved beam theories having non-symmetric thin-walled cross sections, a curved beam theory based on centroid-shear center formulation is presented for the spatially coupled free vibration and elastic analysis. For this, the displacement field is expressed by introducing displacement parameters defined at the centroid and shear center axes, respectively. Next the elastic strain and kinetic energies considering the thickness-curvature effect and the rotary inertia of curved beam are rigorously derived by degenerating the energies of the elastic continuum to those of curved beam. And then the equilibrium equations and the boundary conditions are consistently derived for curved beams having non-symmetric thin-walled cross section. It is emphasized that for curved beams with L- or T-shaped sections, this thin-walled curved beam theory can be easily reduced to the solid beam theory by simply putting the sectional properties associated with warping to zero. In order to illustrate the validity and the accuracy of this study, FE solutions using the Hermitian curved beam elements are presented and compared with the results by previous research and ABAQUS's shell elements.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.1033-1039
• /
• 2006

To overcome the drawback of currently available curved beam theories having non-symmetric thin-walled cross sections, a curved beam theory based on centroid-shear center formulation is presented for the spatially coupled free vibration and elastic analyses. For this, the elastic strain and kinetic energies considering the thickness-curvature effect and the rotary inertia of curved beam are derived by degenerating the energies of the elastic continuum to those of curved beam. And then the equilibrium equations and the boundary conditions are consistently derived for curved beams having non-symmetric thin-walled cross section. It is emphasized that for curved beams with L- or T-shaped sections, this thin-walled curved beam theory can be easily reduced to tl1e solid beam theory by simply putting the sectional properties associated with warping to zero. In order to illustrate the validity and the accuracy of this study, FE solutions using the Hermitian curved beam elements are presented and compared with the results by previous research and ABAQUS's shell elements.

• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.82-88
• /
• 2002

This paper deals with the free vibrations of horizontally curved beams with transition curve. Based on the dynamic equilibrium equations of a curved beam element subjected to the stress resultants and inertia forces, the governing differential equations are derived for the out-of-plane vibration of curved beam wish variable curvature. This equations are applied to the beam having transition curve in which the third parabolic curve is chosen in this study. The differential equations are solved by the numerical procedures for calculating the natural frequencies. As the numerical results, the various parametric studies effecting on natural frequencies are investigated and its results are presented in tables and figures. Also the laboratory scaled experiments were conducted for verifying the theories developed herein.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.308-314
• /
• 2000

This study explores the free, out-of-plane vibrations of horizontally circular curved beams. The differential equations governing the free vibration of such beams, including the effects of warping and rotatory inertia, are derived and solved numerically. The Runge-Kutta method and the Determinant Search method combined with Regula-Falsi method are used to integrate the differential equations and to obtain the natural frequencies, respectively. The lowest three natural frequencies are calculated over a wide range of non-dimensional system parameters: the horizontal rise to span length ratio, the slenderness ratio, the stiffness parameter, and the warping parameter. It is expected that the results obtained herein can be used practically for the design of curved member systems.

• 한국산학기술학회논문지
• /
• 제11권8호
• /
• pp.2734-2740
• /
• 2010

미분구적법을 이용하여, 전단변형을 고려하지 않은, 단면적이 변하는 비대칭 곡선 보의 면내 자유진동을 해석하였다. 다양한 경계조건 및 굽힘 각에 따른 진동수를 계산하였고, 그 결과를 다른 수치해석들과 비교하였다. 미분구적법은 비교적 적은 요소를 사용하고도 정확한 해석결과를 보여준다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.875-880
• /
• 2001

This paper deals with the free vibrations curved beams with elastic springs. Taking into account the effects of rotatory inertia and shear deformation, differential equations governing the free vibrations of such beams are derived, in which each elastic spring is modeled as a discrete Winkler foundation with very short longitudinal length. Differential equations are solved numerically to calculate natural frequencies and mode shapes. In numerical examples, the circular, parabolic, sinusoidal and elliptic curved members are considered. The parametric studies are conducted and the lowest four frequency parameters are reported in tables and figures as the non-dimensional fonns. Also the typical mode shapes are presented.