• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.869-875
• /
• 2017

Using TCAD simulation, performances of tunnel field-effect transistors (TFETs) was investigated. Drain current-gate voltage types of TFET structure such as single-gate TFET (SG-TFET), double-gate TFET (DG-TFET), L-shaped TFET (L-TFET), and Pocket-TFET (P-TFET) are simulated, and then as dielectric constant of gate oxide and channel length are varied their subthreshold swing (SS) and on-current ($I_{on}$) are compared. On-currents and subthreshold swings of the L-TFET and P-TFET structures with high electric constant and line tunneling were 10 times and 20 mV/dec more than those of the SG-TFET and DG-TFET using point tunneling, respectively. Especially, it is shown that hump effect which dominant current element changes from point tunneling to line tunneling, is disappeared in P-TFET with high-k gate oxide such as $HfO_2$. The analysis of 4 types of TFET structure provides guidelines for the design of new types of TFET structure which concentrate on line tunneling by minimizing point tunneling.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.262-266
• /
• 2011

A simulation study of a current-mode direct current (DC)-DC boost converter is presented in this paper. This converter, with a fully-integrated power module, is implemented by using bipolar complementary metal-oxide semiconductor (BiCMOS) technology. The current-sensing circuit has an op-amp to achieve high accuracy. With the sense metal-oxide semiconductor field-effect transistor (MOSFET) in the current sensor, the sensed inductor current with the internal ramp signal can be used for feedback control. In addition, BiCMOS technology is applied to the converter, for accurate current sensing and low power consumption. The DC-DC converter is designed with a standard 0.35 ${\mu}m$ BiCMOS process. The off-chip inductor-capacitor (LC) filter is operated with an inductance of 1 mH and a capacitance of 12.5 nF. Simulation results show the high performance of the current-sensing circuit and the validity of the BiCMOS converter. The output voltage is found to be 4.1 V with a ripple ratio of 1.5% at the duty ratio of 0.3. The sensing current is measured to be within 1 mA and follows to fit the order of the aspect ratio, between sensing and power FET.

• Journal of the Korean Society of School Health
• /
• v.33 no.2
• /
• pp.125-138
• /
• 2020

Purpose: The study investigated the effect of adolescent health behavior on the prevalence of current allergic diseases. Methods: The subjects were 57,303 middle and high school youth. Data were analyzed using Rao-Scott χ² test and complex sample logistic regression analysis. Results: While controlling the affect of the general characteristics of the subjects, health behaviors affecting the current prevalence of allergic diseases were smoking, drinking, physical activity, eating habits, drug abuse, and mental health. Smoking behaviors affecting the current prevalence of allergic diseases were lifetime smoking experience, smoking days, liquid e-cigarette lifetime smoking experience, number of liquid electronic cigarette smoking days, e-cigarette lifetime smoking experience, e-cigarette smoking days, amount of smoking, second-hand smoking and drinking behaviors were lifetime drinking, drinking days, the amount of drinking, and severe drinking. Variables such as physical activity exceeding 60 minutes days, intake of energy and sweet drinks, water intake, habitual drug use and mental health behavior such as stress perception, weekday sleep time, subjective sleep satisfaction, depression, suicidal thoughts/ plan/ attempts affect current allergic diseases (p<.001). Conclusion: The results showed that current allergic disease related health behaviors in Korean adolescents. Therefore, considering these factors, it may be helpful to facilitate a health promotion plan for prevention and management of such diseases and to promote evidence-based health practices at school.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.5
• /
• pp.574-581
• /
• 2015

In this paper, the effect of high voltage current pulse against shaped charge jet was analyzed through the visualization of jet behavior using flash X-ray and comparison of depth of penetration(DOP) into RHA(Rolled Homogeneous Armor) witness plates. The behavior of jet particles has been acquired using a flash X-ray equipment when current pulse was applied into the metal jet of a shaped charge(SC) warhead. Typical results such as jet breakup and radial jet dispersion, which are due to electromagnetic pressure by current pulse, have been obtained. Dozens of penetration experiments using a shaped charge with 55 mm diameter were performed according to various combinations of major parametric variables such as electrode spacing, standoff distance from SC warhead to electrode, and charge voltage. Subsequently, interrelations between major parametric variables and DOPs into RHA were analyzed.

• Progress in Superconductivity
• /
• v.12 no.2
• /
• pp.93-98
• /
• 2011

Pinning force is the mechanism between a superconductor and a permanent magnet and it provides a stable levitation. However, when external force greater than the pinning force such as the earthquake exerts, the levitated object may lose the levitating characteristic. In order to achieve more stabilized levitation, the copper plate was inserted in between a superconductor and permanent magnets. And by applying the eddy current effect caused from the relationship between a copper plate and permanent magnets, more stabilized levitation can be established. In this study, an optimized design was found based on various configurations of permanent magnet's polarity, thickness and area of copper plate, and the gap distance between copper plate and permanent magnet. As results, higher eddy current value was obtained at where the change of polarity exists in permanent magnet configuration, and the highest eddy current value was observed at the copper plate thickness of 5 mm and the area of 80 mm ${\times}$ 80 mm. From the resulted optimized conditions above, which are 7 mm gap distance between a superconductor and permanent magnets and 80 mm ${\times}$ 80 mm ${\times}$ 5 mm dimension of a copper plate, the stiffness value was 65 % increased comparing to without any copper plate insertion.

• Tribology and Lubricants
• /
• v.31 no.3
• /
• pp.79-85
• /
• 2015

RC delay is a critical issue for achieving high performance of ULSI devices. In order to minimize the RC delay time, we uses the CMP process to introduce high-conductivity Cu and low-k materials on the damascene. The low-k materials are generally soft and fragile, resulting in structure collapse during the conventional high-pressure CMP process. One troubleshooting method is electrochemical mechanical polishing (ECMP) which has the advantages of high removal rate, and low polishing pressure, resulting in a well-polished surface because of high removal rate, low polishing pressure, and well-polished surface, due to the electrochemical acceleration of the copper dissolution. This study analyzes an electrochemical state (active, passive, transpassive state) on a potentiodynamic curve using a three-electrode cell consisting of a working electrode (WE), counter electrode (CE), and reference electrode (RE) in a potentiostat to verify an electrochemical removal mechanism. This study also tries to find optimum conditions for ECMP through experimentation. Furthermore, during the low-pressure ECMP process, we investigate the effect of current density on surface roughness and removal rate through anodic oxidation, dissolution, and reaction with a chelating agent. In addition, according to the Faraday’s law, as the current density increases, the amount of oxidized and dissolved copper increases. Finally, we confirm that the surface roughness improves with polishing time, and the current decreases in this process.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.109-113
• /
• 2004

In this paper, we took the basic experiment in order to explore the optical CT(optical current transformer) for measuring high current in a superhigh voltage condition. It is based on the faraday effect that changes the polarization characteristic of optical signals by the magnetic field. We used 1310[nm] laser diode for a light source and comprised a sensing part with the optional fiber of 5[m], 10[m], 20[m] length each. The range of current was from 400[A] to 1300[A]. We observed the characteristic of output that changes according to the length of the optical fiber composing the sensing part. The optical fiber of 5[m] length used for the sensing part had -11.1% of the maximum ratio of error and 10[m] and 20[m] length had -3.5% and 1.7% each. This means that the power and linearity of output increase in proportion to the length of optical fiber and applied current in the same experimental condition.

• The Journal of Korean Physical Therapy
• /
• v.21 no.4
• /
• pp.65-71
• /
• 2009

Purpose: Transcranial direct current stimulation (tDCS) is a useful method for modulating the brain activity. This study compared the effect of continuous and interrupted tDCS using the change in the movement related cortical potential. Methods: Thirty healthy participants (male: 18 and female: 12) were assigned randomly to three groups; sham tDCS, continuous tDCS, which the current continuously flowed for 10 minutes, and interrupted tDCS, which the interrupted current flowed for 10 minutes (repetition: 4sec stimulation and 5sec rest) at an intensity of 1mA with anodal polarity. The effect of tDCS on the right primary motor area was measured from the movement related cortical potential (MRCP) before and after the experiment. MRCP consisted of the bereitshaftspotential (BP) and negative slope potential (NS) at Cz and C4. Results: Continuous and interrupted tDCS showed a significant difference in the changes in the BP, NS at Cz and C4 compared to the sham tDCS. However, there was no significant difference between the continuous tDCS and interrupted tDCS. Conclusion: The change in cortical activity by continuous and interrupted tDCS results from an improvement in the MRCP. An interrupted tDCS may be a safe and useful modality for stimulating the cortical region.

• Korea Journal of Hospital Management
• /
• v.9 no.2
• /
• pp.102-127
• /
• 2004

The objective of this study is to analyze a current trend of and relating factors on profitability of the Korean Public Corporation Medical Centers(KPCMCs, hereinafter, hospitals) in Korea. There are 34 hospitals in Korea as of 2004. Among these hospitals some are red ink hospitals, others are black inks in terms of profitability. Data were collected by Korea Health Industry Development Institute(KHIDI) Statistics for Hospital Management 2000-2002 and Ministry of Health and Welfare(MOHW) financial data of public hospitals which was planned to coordinate public health care services roadmap in the long run. The samples are 32 hospitals. Profitability was measured in the aspect of profit rate with normal profit to total assets, and normal profit to gross revenues as dependent variables in respective. Independent variables were classified by general factors, i.e., location, intern/resident training, period of opening, number of beds, and managerial factors(current ratio, fixed ratio, liability to total assets, total assets turnover, personnel costs, materials cost, administrative cost), and finally factors related to patient treatment(average length of stay, bed occupancy rate, admission ratio of outpatients). The methods of analysis are correlation and multiple regression analysis. This study shows firstly, a lot of hospitals are optimal current ratio. Hospitals in upper 100% current ratio are 81.2%. And the personnel cost in total costs are high. Secondly, the trend of normal profit to gross revenues of hospitals are deteriorating gradually. And lastly, as a result of multiple regression analysis, the factors had on significant effect on normal profit to total assets are fixed ratio(+), liability to total assets(-), bed occupancy rate(+), admissions of outpatients(+), etc. And the factors had on significant effect on normal profit to gross revenues are current ration(+), fixed ratio(+), personnel cost(-), administrative expenses(-), admissions of outpatients(+), etc. In conclusion, to improve the profitability of hospitals, the efforts to reduce personnel cost and average length of stay might be needed. And also beds utilization rate need to be increased.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.892-899
• /
• 2016

Gravity current flow past a subsea pipe above a scour based on computational fluid dynamics. For comparison, gravity current flow over pipe above a smooth bed also calculated, this configuration conventionally employed to consider the scour effect from an ideal approach. Interestingly, there different flow features and hydrodynamic forces between the scour and smooth bed cases. These results indicate that realistic conditionvery important investigatthe scour effect on gravity current flow around subsea pipe.