• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.163-166
• /
• 2016

It is important to operate the driving circuit under the optimal condition through precisely sensing the power consumption causing the temperature made mainly by the MOSFET (metal-oxide semiconductor field-effect transistor) when a BLDC (Brushless Direct Current) motor operates. In this letter, a Super-junction (SJ) power TMOSFET (trench metal-oxide semiconductor field-effect transistor) with an ultra-low specific on-resistance of $0.96m{\Omega}{\cdot}cm^2$ under the same break down voltage of 100 V is designed by using of the SILVACO TCAD 2D device simulator, Atlas, while the specific on-resistance of the traditional power MOSFET has tens of $m{\Omega}{\cdot}cm^2$, which makes the higher power consumption. The SPICE simulation for measuring the power distribution of 25 cells for a chip is carried out, in which a unit cell is a SJ Power TMOSFET with resistor arrays. In addition, the power consumption for each unit cell of SJ Power TMOSFET, considering the number, pattern and position of bonding, is computed and the power distribution for an ANSYS model is obtained, and the SJ Power TMOSFET is designed to make the power of the chip distributed uniformly to guarantee it's reliability.

• Sleep Medicine and Psychophysiology
• /
• v.16 no.1
• /
• pp.5-9
• /
• 2009

Relatively little is known about the neurobiology of insomnia, despite its wide prevalence and broad medical impact. Although much is still to be learned about the pathophysiology of the disorder, identification, systematic assessment, and appropriate treatment are clearly beneficial to patients. Recent research, using quantitative EEG, polysomnography (PSG), multiple sleep latency test (MSLT) and neuroimaging techniques, suggests that some broad areas can be identified as possible pathophysiological models. Sleep-wake homeostat model hypothesizes a failure in homeostatic regulation of sleep, an attenuated increase in sleep drive with time awake, and/or defective sensing of sleep need. Circadian clock model hypothesizes a dysfunctional circadian clock, resulting in changes in the timing of sleep-wake propensity that are incompatible with normal sleep. Intrinsic sleep-wake state mechanism model suggests that abnormal function of insomnia comprises the systems responsible for expression of the sleep states themselves. Extrinsic over-ride mechanism (stress-response) model suggests that insomnia reflects the consequences of overactivity of one of the systems considered "extrinsic" to normal sleep-wake control. Many current therapies for insomnia are based on these physiological models. Several attempts have been made to create a physiological model that would explain this disorder and could be used as a foundation for treatment. However, it appeared that no model can fully explain and clarify all aspects of insomnia. Future research should be necessary to expand our knowledge on the biological dimensions of insomnia.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.9
• /
• pp.821-827
• /
• 2007

The nitrogen oxides, NO and $NO_2$, abbreviated usually as NOx, emitted from combustion facilities such as power plants and automobiles are the typical air-pollutants causing acid rain and photochemical smog. In order to solve the NOx-related pollution problems effectively, we need efficient techniques to monitor NOx in the combustion exhausts and in environments. Development of solid-state electrochemical devices for detecting NOx is demonstrated based on various combination of solid electrolytes and auxiliary sensing materials. The object of this research is to develop various sensor performance for solid state amperometric sensor, and to test gas sensor performance manufactured. So we try to present a guidance for developing amperometric gas sensor. We concentrated on development of manufacturing process and performance test. Amperometric Nitrogen dioxide sensor was fabricated using NASICON and an $NaNO_2$ layer deposited on the counter electrode. The current response was almost linear with Nitrogen dioxide concentration in the range 1-350 ppb at $150^{\circ}C$.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2009

Localization of nodes is a key technology for application of wireless sensor network. Having a GPS receiver on every sensor node is costly. In the past, several approaches, including range-based and range-free, have been proposed to calculate positions for randomly deployed sensor nodes. Most of them use some special nodes, called anchor nodes, which are assumed to know their own locations. Other sensors compute their locations based on the information provided by these anchor nodes. This paper uses a single mobile anchor node to move in the sensing field and broadcast its current position periodically. We provide a weighted centroid localization algorithm that uses coefficients, which are decided by the influence of mobile anchor node to unknown nodes, to prompt localization accuracy. We also suggest a criterion which is used to select mobile anchor node which involve in computing the position of nodes for improving localization accuracy. Weighted centroid localization algorithm is simple, and no communication is needed while locating. The localization accuracy of weighted centroid localization algorithm is better than maximum likelihood estimation which is used very often. It can be applied to many applications.

• Journal of Welding and Joining
• /
• v.24 no.5
• /
• pp.37-42
• /
• 2006

The robotic arc welding is widely employed in the fabrication industry fer increasing productivity and enhancing product quality by its high processing speed, accuracy and repeatability. Basically, the bead geometry plays an important role in determining the mechanical properties of the weld. So that it is very important to select the process variables for obtaining optimal bead geometry. In this paper, the possibilities of the Infrared camera in sensing and control of the bead geometry in the automated welding process are presented. Both bead width and thermal images from infrared thermography are effected by process parameters. Bead width and isotherm radii can be expressed in terms of process parameters(welding current and welding speed) using mathematical equations obtained by empirical analysis using infrared camera. A linear relationship exists between the isothermal radii producted during the welding process and bead width.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.361-364
• /
• 2005

The use of remotely sensed data and geographic information system (GIS) to develop conservation-oriented watershed management strategies on Imha Dam, Korea, is presented. The change of land use for study area was analyzed using multi-temporal Landsat imagery. A soil loss model was executed within a GIS environment to evaluate watershed management strategies in terms of soil loss. In general, remotely sensed data provide efficient means of generating the input data required for the soil loss model. Also, GIS allowed for easy assessment of the relative erosion hazard over the watershed under the different land use change options. The soil loss model predicted substantial declines in soil loss under conservation-oriented land management compared to current land management for Imha Dam. The results of this study indicate that soil loss potential (5,782,829 ton/yr) on Imha Dam in 2003 is approximately 1.27 times higher than that (4,557,151 ton/yr) in 1989. This study represents the first attempt in the application of GIS technology to watershed conservation planning for Imha Dam. The procedures developed will contribute to the evolution of a decision support system to guide the land planning and dam management in Imha Dam.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.653-655
• /
• 2005

More than 70 percent of terrestrial territory of Korea is mountainous areas where degradation becomes serious year by year due to illegal tombs, expanding golf courses and stone mine development. We elaborate the potential usage of high resolution image for the monitoring of the phenomena. We made the classification of tombs and the statistical radiometric characteristics of graves were identified from this project. The graves could be classified to 4 groups from the field survey. As compared with grouping data after clustering and discriminant analysis, the two results coincided with each other. Object-oriented classification algorithm for feature extraction was theoretically researched in this project. And we did a pilot project, which was performed with mixed methods. That is, the conventional methods such as unsupervised and supervised classification were mixed up with the new method for feature extraction, object-oriented classification method. This methodology showed about $60\%$ classification accuracy for extracting tombs from satellite imagery. The extraction of tombs' geographical coordinates and graves themselves from satellite image was performed in this project. The stone mines and golf courses are extracted by NDVI and GVI. The accuracy of classification was around 89 percent. The location accuracy showed extraction of tombs from one-meter resolution image is cheaper and quicker way than GPS method. Finally we interviewed local government officers and made analyses on the current situation of mountainous area management and potential usage of KOMPSAT-II images. Based on the requirement analysis, we developed software, which is to management and monitoring system for mountainous area for local government.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.759-762
• /
• 2005

Recently, Intelligent Transportation System(ITS) has been applied to satisfy increasing traffic demand every year and to solve many traffic problems. Especially, Advanced Traveller Information System(ATIS) is a transportation system to optimize the trip of each other vehicle. It is important to provide the driver with quick and comfortable path from source to destination. However, it is difficult to provide a shortest path in a road network with dynamic cost. Because the existing research has a static cost. Therefore, in this paper we propose an operator for searching traffic dependent shortest path. The proposed operator finds the shortest path from source to destination using a current time cost and a difference cost of past time cost. Such a method can be applied to the road status with time. Also, we can expect a predicted arrival time as well as the shortest path from source to destination. It can be applied to efficiently application service as ITS and have the advantages of using the road efficiently, reducing the distribution cost, preparing an emergency quickly, reducing the trip time, and reducing an environmental pollution owing to the saving the fuel.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.678-682
• /
• 2005

IETF suggested AAA for safe and reliable user authentication on various network and protocol caused by development in internet and increase in users. Diameter standard authentication system does not provide mutual authentication and non-repudiation. AAA authentication system using public key was suggested to supplement such Diameter authentication but application in mobile service control nodes is difficult due to overhead of communication and arithmetic. ID based AAA authentication system was suggested to overcome such weak point but it still has the weak point against collusion attack or forgery attack. In this thesis, new ID based AAA authentication system is suggested which is safe against collusion attack and forgery attack and reduces arithmetic quantity of mobile nodes with insufficient arithmetic and power performance. In this thesis, cryptological safety and arithmetical efficiency is tested to test the suggested system through comparison and assessment of current systems. Suggested system uses two random numbers to provide stability at authentication of mobile nodes. Also, in terms of power, it provides the advantage of seamless service by reducing authentication executing time by the performance of server through improving efficiency with reduced arithmetic at nodes.

• Journal of Power Electronics
• /
• v.8 no.3
• /
• pp.217-227
• /
• 2008

The electric power subsystems (EPS) of most remote sensing satellites consist of a solar array as a source of energy, a storage battery, a power management and control (PMC) unit and a charge equalization unit (CEU) for the storage battery. The PMC and CEU use high frequency transformers in their power modules. This paper presents a design, implementation and testing results of a high frequency transformer for the EPS of satellite applications. Two approaches are used in the design process of the transformer based on the pre-determined transformer specifications. The transformer is designed based on an ETD 29 ferrite core. The implemented transformer consists of one center-tapped primary coil with eleven center-tapped secondary coils. The offline calculation results and measured values of R, L for transformer coils are convergence. A test circuit for measuring the transformer parameters like voltage, current and B-H hysteresis was implemented and applied. The test results confirm that the voltage waveforms of both primary and secondary coils were as desired. No overlapping occurred between the control signal and the transformer, which was not saturated during testing even during a short circuit test of the secondary channels. The dynamic B-H loop characteristics of the used transformer cores were measured. The sample test results are given in this paper.