• Journal of Power Electronics
• /
• 제13권2호
• /
• pp.232-242
• /
• 2013

To obtain phase currents information in AC drives, shunt sensing technology is known to show great performance in cost-effectiveness and therefore it is widely used in low cost applications. However, shunt sensing methods are unable to acquire phase currents in certain operation conditions. This paper deals with the derivation of the boundary conditions for phase current reconstruction in three-shunt sensing inverters and proposes a voltage injection method to expand the measurable areas. As the boundary conditions are deeply dependent on the switching patterns, they are typically analyzed on the voltage vector plane for space vector pulse width modulation (SVPWM) and discontinuous pulse width modulation (DPWM). In the proposed method, the voltage injection and its compensation are conducted within one sampling period. This guarantees fast current reconstruction and the injected voltage is decided so as to minimize the current ripple. In addition to the voltage injection method, a sampling point shifting method is also introduced to improve the boundary conditions. Simulation and experimental results are presented to verify the boundary condition derivation and the effectiveness of the proposed voltage injection method.

• 대한전자공학회논문지TC
• /
• 제48권3호
• /
• pp.50-59
• /
• 2011

본 논문은 주파수 영역에서 과거와 현재에 센싱된 결과들의 관계를 이용한 스펙트럼 센싱기법을 제안하였다. 기존에 제안된 대부분의 스펙트럼 센싱기법은 해당 시간에 센싱된 우선사용자의 신호만을 다루고 있다. 해당 시간 이전의 우선사용자의 상태는 조건부확률을 사용하여 검출기의 신뢰성을 증가시킬 수 있다. 따라서, 본 논문은 이전 시간과 해당 시간의 스펙트럼 센싱 결과를 사용하는 cross entropy 기반의 스펙트럼 센싱기법을 제안하며 이를 통해 우선사용자 신호 검출 성능을 향상시키고 잡음에 강인한 성능을 가질 수 있다. 이전 시간에 검출된 신호가 잡음인 경우 cross entropy 기반의 스펙트럼 센싱 성능 감소는 기존의 entropy 기반의 센싱기법과 동일하게 된다. 이러한 문제를 해결하기 위해 본 논문에서는 보다 향상된 cross entropy 센싱기법을 제안하였다. 본 논문은 시뮬레이션을 통해 가장 최근에 제안된 주파수 영역에서의 entropy 기반 스펙트럼 센싱기법 보다 제안된 방법이 더 나은 성능을 보이는 것을 보였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.461-463
• /
• 2003

The information on the cloud presence within a instantaneous field of view is the first step toward the derivation of many other geophysical parameters. Here, we first applied the current MODIS cloud detection algorithm developed by University of Wisconsin and compared the results to a visual interpretation of composite data, especially during the daytime. Most of cases, the detection algorithm performs very well, except a few cases with over-detection. One of the reasons for the false detection is due to the time independent use of land information which affects the threshold values of visible channel test. In the presentation, we show detailed analysis of the current cloud detection algorithm and suggest possible way to overcome the current shortfall.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.888-890
• /
• 2003

In the distribution networks, it is required to develop compact and smart current and voltage sensors for compact and digital switchgears. The sensor developed newly adopt the priciple of rogowski coil for current sensing and resistive voltage divider for voltage sensing. The sensing characteristics and reliabilities were improved compared to conventional ones. In the near future, these voltage and current sensing apparatus will be widely used with electronic protection units for the distribution switchgear.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.195-196
• /
• 2012

In recent years, in an effort to improve the efficiency and the power density of the front-end power factor correction(PFC), the interleaving of multiple converter is employed. The conventional interleaved continuous conduction mode(CCM) boost PFC converter requires input and output voltage sensing and three current sensing to obtain current balancing between modules. In this paper, the interleaved CCM PFC converter based on modulated carrier control is proposed. With the proposed method, two phase interleaved PFC can be realized simply without line voltage sensing resistor and can achieve current balancing without additional current sensing resistor on common return path. The simulation studies are carried out to verify the effectiveness of the proposed control scheme.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.450-450
• /
• 2011

This study reports the hydrogen sulfide gas sensing properties of ZnO nanorods bundle and the investigation of gas sensing mechanism. Also the improvement of sensing properties was also studied through the application of ZnO heterstructured nanorods. The 1-Dimensional ZnO nano-structure was synthesized by hydrothermal method and ZnO nano-heterostructures were prepared by sonochemical reaction. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) spectra confirmed a well-crystalline ZnO of hexagonal structure. The gas response of ZnO nanorods bundle sensor increased with increasing temperature, which is thought to be due to chemical reaction of nanorods with gas molecules. Through analysis of X-ray photoelectron spectroscopy (XPS), the sensing mechanism of ZnO nanorods bundle sensor was explained by well-known surface reaction between ZnO surface atoms and hydrogen sulfide. However at high sensing temperature, chemical conversion of ZnO nanorods becomes a dominant sensing mechanism in current system. In order to improve the gas sensing properties, simple type of gas sensor was fabricated with ZnO nano-heterostructures, which were prepared by deposition of CuO, Au on the ZnO nanorods bundle. These heteronanostructures show higher gas response and higher current level than ZnO nanorods bundle. The gas sensing mechanism of the heteronanostructure can be explained by the chemical conversion of sensing material through the reaction with target gas.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.727-730
• /
• 2005

In this paper, we propose a new current sense amplifier for low-voltage, high-speed SRAM. As a supply voltage is reduced, a sensing delay is increased owing to reduced cell read current. It causes a low-speed operation in SRAM. To overcome this problem, we present a new current sense amplifier which consists of the current-mirror type circuit with feedback structure. For demonstration, a 0.8-V, 256-Kb SRAM incorporating the proposed current sense amplifier has been designed with $0.18-{\mu}m$ CMOS technology. The simulation results show 15.6ns of the sensing delay reduction in comparison with a previous current sense amplifier and 11.5ns of the sensing delay reduction in comparison with a voltage sense amplifier.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.366-372
• /
• 2007

Self-sensing measurement of piezo inkjet and its application are discussed. The pressure wave inside the inkjet dispenser was measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially available laser vibrometer. Here, two applications using self-sensing signal were discussed: waveform design for high speed jetting and condition monitoring. For waveform design, two pulse waveform was designed based on self-sensing signal such that the pressure wave after droplet formation can be minimized. For condition monitoring, self-sensing signal was shown to be effective in detecting air bubble trapped in inkjet printhead.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.912-917
• /
• 2007

Many electrochemical power devices such as solid state batteries and solid oxide fuel cell have been studied and developed for solving energy and environmental problems. An amperometric gas sensor usually generates sensing signal of electric current along the proportion of the concentration of target gas under the condition of limiting current. For narrow variations of gas concentration, the amperometric gas sensor can show higher precision than a potentiometric gas sensor does. In additional, cross sensitivities to interfering gases can possibly be mitigated by choosing applied voltage and electrode materials properly. In order to improve the sensitivity to $NO_2$, the device was attached with Au reference electrode to form the amperometric gas sensor device with three electrodes. With the fixed bias voltage being applied between the sensing and counter electrodes, the current between the sensing and reference electrodes was measured as a sensing signal. The response to $NO_2$ gas was obviously enhanced and suppressed with a positive bias, respectively, while the reverse current occurred with a negative bias. The way to enhance the sensitivity of $NO_2$ gas sensor was thus realized. It was shown that the response to $NO_2$ gas could be enhanced sensitivity by changing the bias voltage.

• 대한원격탐사학회지
• /
• 제38권6_1호
• /
• pp.1557-1571
• /
• 2022

원격탐사 센서가 사용하는 파장 영역 중 중적외선 파장 영역대는 국토, 환경, 재해, 군사 등의 폭넓은 분야에서 넓은 응용성을 가진다. 그러나, 중적외선 영역대의 독특한 특성으로 인하여 관련된 기술개발이 크게 발달하지 못한 측면이 있다. 최근 들어 중적외선 원격탐사 기술의 발전은 새로운 연구분야를 제시하고 있으며, 국내외 적으로 다양한 연구 결과가 보고되고 있다. 본 연구는 최근까지 개발된 중적외선 원격탐사 기술에 대한 연구 결과에 대한 문헌 기록을 분석하여 관련 기술의 현황 및 주요 연구 결과를 체계적으로 정립하여 중적외선 원격탐사 기술의 현황 및 연구동향을 제시하였다.