• 대한의용생체공학회:의공학회지
• /
• 제27권4호
• /
• pp.154-163
• /
• 2006

A 64-channel magnetocardiogram (MCG) system using low-noise superconducting quantum interference device (SQUID) planar gradiometers was developed for the measurements of cardiac magnetic fields generated by the heart electric activity. Owing to high flux-to-voltage transfers of double relaxation oscillation SQUID (DROS) sensors, the flux-locked loop electronics for SQUID operation could be made simpler than that of conventional DC SQUIDs, and the SQUID control was done automatically through a fiber-optic cable. The pickup coils are first-order planar gradiometers with a baseline of 4 em. The insert has 64 planar gradiometers as the sensing channels and were arranged to measure MCG field components tangential to the chest surface. When the 64-channel insert was in operation everyday, the average boil-off rate of the dewar was 3.6 Lid. The noise spectrum of the SQUID planar gradiometer system was about 5 fT$_{rms}$/$\checkmark$Hz at 100 Hz, operated inside a moderately shielded room. The MCG measurements were done at a sampling rate of 500 Hz or 1 kHz, and realtime display of MCG traces and heart rate were displayed. After the acquisition, magnetic field mapping and current mapping could be done. From the magnetic and current information, parameters for the diagnosis of myocardial ischemia were evaluated to be compared with other diagnostic methods.

• 한국ITS학회 논문지
• /
• 제7권4호
• /
• pp.49-60
• /
• 2008

현재 비디오 영상처리시스템(VIPS: Video Image Processing System)은 실시간으로 들어오는 영상정보를 분석하여 유용한 정보를 제공하고, 하나의 카메라로 여러 차로를 동시에 감시할 수 있는 알고리즘으로 교통량, 속도뿐만 아니라 밀도 및 점유율 등 다양한 정보를 제공하나, 안전지대에서는 효과적이지 못한다. 그러나, 영상검지시스템에서 개별차량에 대한 추적시스템으로 개발할 경우 사고 및 차로 변경의 위험요소 감지 등 실시간으로 보다 다양한 정보를 제공할 수가 있다. 본 논문은 컴퓨터비전 기술을 이용하여 개별차량의 추적시스템을 개발하였으며, 이 시스템을 실제 도로영상에 적용하여 Tripwire에서 수집할 수 있는 교통정보뿐만 아니라 사고, 상충정보 등 다양한 정보를 제공한다. 본 연구의 검증을 위하여 개별차량 추적시스템으로 1) 돌발상황 감지 2) 급차로 변경과 같은 비정상적인 차량흐름의 경우를 감지하는 실험을 수행하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2012년도 임시총회 및 하계학술연구발표회
• /
• pp.121-122
• /
• 2012

Iron-excess gallium ferrite, $Ga_{0.6}Fe_{1.4}O_3$ (GFO), is known to have room-temperature ferromagnetic phases and potentially exhibit ferroelectricity as well [1]. But, leaky polarization-electric field (PE) hysteresis curves of the GFO thin film are hurdle to prove its spontaneous polarization, in other words, ferroelecticity. One of the reasons that the GFO films have leaky PE hysteresis loop is carrier hopping between $Fe^{2+}$ and $Fe^{3+}$ sites due to oxygen deficiency. We focus on reducing conducting current by substituting divalent cations at $Fe^{2+}$ sites. GFO thin films were grown epitaxially along b-axis normal to $SrRuO_3/SrTiO_3$ (111) substrates by pulsed laser deposition. Current density of the ion-substituted GFO thin films was reduced by $10^3$ or more. Ferroelectric properties of the ion-substituted GFO thin films were measured using macroscopic and microscopic schemes. In particular, local ferroelectric properties of the GFO thin films were exhibited and their remnant polarization and piezoelectric d33 coefficient were obtained.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2982-2989
• /
• 2021

One of the consequences of the 475 ℃ embrittlement of duplex stainless steels is the reduction of the resistance to localized corrosion. Therefore, the detection of this type of embrittlement before the material exhibits significant loss in toughness, and corrosion resistance is important to ensure the structural integrity of critical components under corrosion threats. In this research, conductivity measurements are performed using the alternating current potential drop (ACPD) technique with using a portable four-point probe as a nondestructive evaluation (NDE) method for detecting the embrittlement in a 2507 (UNS S32750) super duplex stainless steel (SDSS) aged at 475 ℃ from as-received condition to 300 h. The electric conductivity results were compared against two electrochemical tests namely double loop electrochemical potentiokinetic reactivation (DL-EPR) and critical pitting temperature (CPT). Mechanical tests and the microstructure characterized using scanning electron microscopy (SEM) imaging are conducted to track the progress of embrittlement. It is shown that the electric conductivity correlates with the changes in impact energy, microhardness, and CPT corrosion tests result demonstrating the feasibility of the four-point probe as a possible field-deployable method for evaluating the 475 ℃ embrittlement of 2507 SDSS.

• 한국전자파학회논문지
• /
• 제30권2호
• /
• pp.152-159
• /
• 2019

도플러 레이다는 단일 주파수의 정현파를 이용하므로 움직이는 이동체의 속도만을 측정할 수 있다고 알려져 있다. 일반적으로 이동체의 거리를 측정하기 위해서는 FMCW 레이다나 펄스 레이다를 이용하여야 하는데, 이 경우 하드웨어 구성 및 신호처리가 복잡할 뿐만 아니라, 주파수 대역폭을 넓게 사용하기 때문에 24 GHz나 77 GHz 대역의 밀리미터파를 사용할 수밖에 없어 가격이 비싸다. 따라서 가격이 저렴한 도플러 레이다에서 다중 톤 주파수를 이용하여 이동체의 속도 외에 거리까지 센싱하는 연구가 시작되고 있다. 이에 본 연구에서는 2.4 GHz 도플러 레이다에 내장된 PLL만을 이용한 주파수 조정만으로도 이동체의 거리 센싱이 가능함을 보인다. 특히, 기존에 제안된 DC 기반의 거리 계산에서 필요한 DC 정보를 제거하고, 교류결합된 AC 정보만을 이용하여 거리를 센싱할 수 있음을 보인다. 제안된 기술은 2.4 GHz 대역의 이동체 식별용 특정소출력 무선기기 기술기준을 만족하므로 45 dBm EIRP 출력을 이용하여 이동체 거리 센싱이 필요한 다양한 응용이 가능하다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 추계학술대회
• /
• pp.95-97
• /
• 2018

The power quality of Single Phase Grid-Connected Inverters (GCIs) has received much attention with the increasing number of Distributed Generation (DG) systems. However, the performance of single phase GCIs get degraded due to several factors such as the grid voltage harmonics, the dead time effect, and the turn ON/OFF of the switches, which causes the harmonics at the output of GCIs. Therefore, it is not easy to satisfy the harmonic standards such as IEEE 519 and P1547 without the help of harmonic compensator. To meet the harmonic standards a certain kind of harmonic controller needs to be added to the current control loop to effectively mitigate the low order harmonics. In this paper, the harmonic compensation is performed using a novel robust harmonic compensation method based on Digital Lock-in Amplifier (DLA). In the proposed technique, DLAs are used to extract the amplitude and phase information of the harmonics from the output current and compensate it by using a simple PI controller in the feedforward manner. In order to show the superior performance of the proposed harmonic compensation technique, it is compared with those of conventional harmonic compensation methods in terms of the effectiveness of harmonic elimination, complexity, and implementation. The validity of the proposed harmonic compensation techniques for the single phase GCIs is verified through the experimental results with a 5kW single phase GCI. Index Terms -Single Phase Grid Connected Inverter (SPGCI), Harmonic Compensation Method, Total Harmonic Distortion (THD) and Harmonic Standard.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3614-3619
• /
• 2022

To operate the ion cyclotron resonance heating (ICRH) antennas in a better heating state and produce relatively low impurities, it is necessary to control the antenna spectrum by changing the antenna phasing. As the electrical length of the antenna feeding transmission lines is changing as a matter of the standing wave pattern at the ceramic supports, 90° elbows, T-connectors and antenna loops, we chose to measure the current at the grounding points of the antenna loops by antenna strap probe. The voltage drops along a small, several millimeter-long paths at the end of the antenna loops give a signal that is proportional to the current in the antenna loop. Through the simulation of the antenna strap probe and the actual measurement of the antenna phasing under vacuum conditions, the reliability of the antenna strap probe based diagnostic system have been successfully proved. Moreover, this system was successfully applied to the ICRH daily experiments in the spring of 2021. In the near future, the active real-time feedback control of the antenna phasing system will be developed based on this diagnostic system in the EAST tokamak.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권1호
• /
• pp.5-7
• /
• 2022

KEPCO's plan is undergoing a trial operation to replace the open-loop section with ring main units configuration where underground distribution lines are installed, by linking the multi-way circuit breakers auto (MCA) on the power side of each pad-mounted transformer. However, ring main units application mentioned above may cause the ripple effects, when implementing the configuration without a study of protection coordination. Because ring main units with classical pre-set protection devices contribution in fault condition didn't consider yet. For the reliable ring main units operation, it is necessary to resolve several protection issues such as the protection coordination with substation side, prevention of the transformer inrush current. These issues can radically deteriorate the distribution system reliability Hence, it is essential to design proper protection coordination to reduce these types of problems. This paper presents a scheme of ring main units' configuration and MCA's settings of time-current curves to preserve the performance of protection coordination among the switchgears considering constraints, e.g. prevention of the ripple effects (on the branch section when a transformer failure occurs and the mainline when a branch line failure occurs). It was confirmed that the propagation of the failure for each interrupter segment could be minimized by applying the proposed TCC and the interrupter settings for the MCAs (branch, transformer). Further, it was verified that the undetected area of the distribution automation system (DAS) could be supplemented by having the MCA configurated ring main units operate first, instead of the internal protection equipment in the transformer such as the fuse, STP when a transformer failure occurs.

• Journal of Power Electronics
• /
• 제4권1호
• /
• pp.46-55
• /
• 2004

This paper presents a high-frequency ZVS-PWM boost chopper-fed DC-DC converter with a single active auxiliary edge resonant snubber in the load-side which can be designed for power conditioners such as solar photovoltaic generation, fuel cell generation, battery and super capacitor energy storages. Its principle operation in steady-state is described in addition to a prototype setup. The experimental results of ZVS-PWM boost chopper-fed DC-DC converter proposed here, are evaluated and verified with a practical design model in terms of its switching voltage and current waveforms, the switching v-i trajectory, the temperature performance of IGBT module, the actual power conversion efficiency and the EMI of radiated and conducted emissions. And then discussed and compared with the hard switching scheme from an experimental point of view. Finally, this paper proposes a practical method to suppress parasitic oscillation due to the active auxiliary resonant switch at ZCS turn off mode transition with the aid of an additional lossless clamping diode loop, and reduced the EMI conducted emission in this paper.

• 한국시스템다이내믹스연구
• /
• 제8권2호
• /
• pp.83-114
• /
• 2007

The Korean defense industry was brought up in the government policy since 1970's. The important parts of defense industrial technologies have not been developed, and usually introduced from overseas. Moreover, the development of advanced technologies was not actively stimulated or pursued, consequently shaping the current structure of the defense industry which lacks global competitiveness due to the dearth of high technologies necessary for high-technology weapons. This research analyzes the systems of the Korean defense industry through a systems thinking approach in order to understand the whole mechanism and to find ways to improve the defense industry. Finding some leverages is the main purpose of systems thinking, that yields desirable results with a little effort. The three policy leverages are: (1) the policy for timely fielding; (2) the R&D investment for development and production of domestic high-technology weapons; and (3) the policy measures for exports. The research findings will contribute to the invigorating and developing the Korean defense industry by providing policy-makers and acquisition practitioners with systematic understanding and insight into the dynamics of the defense industry for them to make and execute efficient policies taking into account the Korean overall defense industry.