• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.2
• /
• pp.66-73
• /
• 2007

This study was carried out to investigate the changes of curing condition on microclimate of temperature, relative humidity during curing process of burley tobacco leaves. The developed facility, ridge opening type was designed to open the central top roof. The air-cured variety, (N. tabacum cv KB111) was normally grown at the Eumseong tobacco experimental station in 2007. Mean daily temperature of $3^{\circ}C$ in ridge opening type curing facility was lower than that of conventional, whereas mean daily relative humidity of 12.6 % RH was lower in conventional curing facility for the entire stage of curing. The frequency distribution of optimal air temperature at daytime was higher 37.5 % in ridge opening type curing facility than that of conventional, while that of optimal relative humidity was lower 8.2 %. In the ridge opening type curing facility, the excessive drying leaves were low, however the price per kilogram was high. These results suggest that the new developed curing facility may be applied to improved microclimate inside the curing facility for curing burley.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.2
• /
• pp.231-237
• /
• 1998

This study was carried out to investigate the effects of curing methods on the concentration of ammonia during curing in burley tobacco leaves. The air-cured tobacco(KB108; Nicotiana tabacum L.) was grown at Chonju Tobacco Experiment Station in 1998 and the tenth leaves from the top on the stalk were harvested. Half of the harvested leaves were cured in normal air curing facility and the other leaves were cured in excessive curing facility. Stalk cut tobaccos were cured in horizontal curing facility. The leaves were sampled every five days from harvesting time to the end of curing(25 days). Ammonia concentration of leaves increased during curing period with a remarkable increase at yellowing stage. The concentration of ammonia was high in the primed cured leaves, while that of the excessive cured leaves was low. It is considered that the lower increase of ammonia in stalk cured leaves may be caused by the translocation from the leaves to the stalk during curing, while that of excessive cured leaves may be caused by the poor decomposition of protein and amino acid during curing by excessive moisture loss and high temperature condition.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.1
• /
• pp.29-32
• /
• 1997

This study was carried out to develop a new stalk curing of the horizontal hanging method that would reduce the harvesting and curing labor, and improve its quality of cured leaf than the conventional stalk curing method in burley tobacco. The horizontal hanging stalk-curing method designed from 1988 was compared with the conventional method. The horizontal method shortened the curing Period for 7 days and reduced to 0.3%, while it occurred 9.4% in the vertical method. In the horizontal method, the quality of cured leaf improved 9%, but the contents of chemical components and physical properties were similar to those of vertical method. The labor of stalk-cut and loading in curing facility reduced 28% by the horizontal method. In harvesting and curing process, the horizontal method resulted 12% of labor saving as compared with the vertical method. Key words : horizontal hanging stalk-curing method, vertical method, stalk-curing.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.9-15
• /
• 1983

The effect of leaf dehydration process and air flow capacity of bulk curing on physical properties and composition of cured leaves was studied, respectively, during flue- curing. Cured leaves from excessive moisture during yellowing stage and those from rapid dehydration Process inevitably during later stages, tend towards lower equilibrium moisture contents, higher shatter index, hither protein nitrogen, and leaf scalding or deterioration of Beaves with redish cast. Early dehydration at the yellowing stage re suited in increasing of p Bamitic, stearic, linoleic, and linolenic acid contents, but showed reduction of brightness difference between upper and lower surface of the cured leaves, Leaf surface lipid decreased with the progress of curing stages, more conspicuously during later stage. Lowering air flow capacity of fan by 50oye during stem drying stage resulted in increasing of leaf surface lipid and 25oye decreasing of electric power consumption , but curing period and kerosene consumption were not affected.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.191-192
• /
• 2023

In recent years, the use of high-strength grout has gained popularity in offshore wind power generation complexes for facility foundations and bridges. These marine wind farms require support for horizontal loads from wind and waves. To ensure the strength of the grout produced in environments similar to the actual placing site, this study investigated the curing of high-strength grout discharged through pump pressure in various environments, and examined the difference in strength according to different variables. Compressive strength measurements revealed that the core specimen collected from the bottom (3cm) and uppermost (50cm) of the specimen exhibited lower strength compared to other height specimens, while the core specimen obtained from the corner exhibited lower strength compared to the center. These findings suggest that the strength difference between the center and the corner is more pronounced when curing at low temperatures. This effect is greater than the strength reduction that typically occurs during low-temperature curing, and thus, necessitates careful attention in similar construction environments.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.1
• /
• pp.29-38
• /
• 2004

With increasing interests in environment matters over the world, incessant efforts to develop products which meet these environmental requirements have been made also in paint industry. Among the efforts in this field, UV(Ultra Violet) curing system is focused as one of most potential system. It is because this system not only proved to be environmentally friendly compared with heat curing system or other system but also has economical merit of smaller facility, less energy consumption, and better productivity. Superior properties in many application is surely one of its dominant merit. With these advantage UV system is applied to a variety of industrial fields and expected to have continuous growth in the future. As practical application of UV system has shown lasting progress, R&D on basic material of this system keeps up with. This is a study on photo-initiator that is a fundamental substance in UV curing method and amine, its aid for better effect. After reviewing on them in the aspects of function, economy, and stability, optimal foumula is pursued through experiments when applied to real products.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.381-389
• /
• 2005

To Analysis of Correlation of Visual Function Findings, by assessing convergence and accommodation, 92 selected objects without any ocular diseases by apperatuses of visual chart(Shinnippon CT30) and phoropter(Shinnippon VT10) at a shan distance(40 cm) were tested upon MEM retinoscopy(Welch Allyn, USA), BELL retinoscopy(Welch Allyn, USA), binocular accommodative facility (${\pm}2.00$ D nipper, Bernell Co., USA), vergence facility(prism nipper, Bernell Co., USA). The results showed as follows. MEM retinoscopy(accommodative lag) showed the same result of a right eye and left eye. Bell retinoscopy(accommodative lag) showed higher correlations between right and left eye than MEM. The lower accommodative lag meant the higher accommodative facility. The binocular accommodative facility(polaroid) was higher than binocular accommodative facility(red-green). Correlations of accommodative facility between right and left eye were higher, and as the higher monocular accommodative facility also meant the higher binocular accommodative facility, monocular and binocular accommodative facilities were relative to vergence facility, These findings can be used as a clinical guide by curing patients' visual function.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1992.10a
• /
• pp.3-3
• /
• 1992

타이어 Curing공정은 공기압 타이어의 제조시 상당히 정교한 단계를 거쳐서 이루어지며, 이는 타이어 설계에 큰 영향을 줄 뿐만아니라, 타이어의 성능에도 관건이 있다. 본 연구에서는 유한요소법을 이용하여 타이어의 molding 공정을 분석하였다. 유한요소해석 프로그램인 MARC가 Cured 타이어 내부의 Curing Bladder 팽창과정해석에 이용되었다. 비압축성 요소로 Curing Bladder를 모형화하였으며, MARC의 접촉문제해석기법(contact option)을 이용하여 Cured 타이어 내부와 Curing Bladder 외부의 접촉부위를 Simulation하였다. 본 연구의 주요 관심내용으로서는 Curing Bladder의 형상변화에 따른 Curing Bladder의 팽창거동해석과, Cured타이어와 Curing Bladder의 접촉부위에서 얻을 수 있는 접촉압력의 비교.검토이다. 타이어 Curing시 타이어와 Bladder의 Contact과정을 해석하여, 아래와 같은 결과를 도출하였다. Bladder의 형상은 Cylinderical 형상 보다는 Toroidal 형태가 접촉압 분포의 균일성 및 크기 측면에 서 우수한 것으로 판단된다. Curing Bladder의 증심선 부위 보다 이에서 약간 떨어진 부위에서 최대 접촉압력이 발생되며, 이는 타이어 내면의 굴곡현상과 깊은 관련이 있윰 것으로 사료된다. 타이어 Bead부의 Carcass 자연평형현상이 유지된 제품을 얻기위해서는, Side-Bead구간의 접촉압력 증가가 필요하며, 이를 위하여는 Bladder 형상이 Cylinderical 보다는 Toroidal 형태가 유리하고, Bead부의 Gage Down, 전체직경의 증가 및 높이의 증가가 유리한 것으로 판단된다. 본 연구 결과를 이용하여, 타이어 Curing과정에서 발생되는 불량제품의 원인파악 및 타이어 설계자가 원하는 제품생산의 불가능한 원인을 파악하는데 도움을 줄 것이다.를 C의 structure와 pointer를 기반으로 하게끔 변경시키고 이에 따르는 제반 변경 사항을 수정 보완하여 프로그램의 분석을 용이하게 하며 기능의 변경 및 추가가 수월하게 하였고 메모리를 동적으로 관리할 수 있게 하였다. 또한 기존의 smpl에 디버깅용 함수 및 설비(facility) 제어용 함수를 추가하여 시뮬레이션 프로그램 작성을 용이하게 하였다. 예를 들면 who_server(), who_queue(), pop_Q(), push_Q(), pop_server(), push_server(), we(), wf(), printfct() 같은 함수들이다. 또한 동시에 발생되는 사건들의 순서를 조종하기 위해, 동시에 발생할 수 있는 각각의 사건에 우선순위를 두어 이 우선 순위에 의하여 사건 리스트(event list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음을 알았다.재발이 나타난 3례의 환자를 제외한 9례 (75%)에서는 현재까지 재발소견을 보이지 않고 있다. 이러한 결과는 다른 보고자들과 유사한 결과를 보이고 있지만 아직까지 증례가 많지 않기 때문에 생존율을 얻

• International Journal of Concrete Structures and Materials
• /
• v.10 no.1
• /
• pp.47-60
• /
• 2016

The objective of this study was to evaluate the capability of different strength-maturity models to account for the effect of the hydration heat on the in-place strength development of high-strength concrete specifically developed for nuclear facility structures under various ambient curing temperatures. To simulate the primary containment-vessel of a nuclear reactor, three 1200-mm-thick wall specimens were prepared and stored under isothermal conditions of approximately $5^{\circ}C$ (cold temperature), $20^{\circ}C$ (reference temperature), and $35^{\circ}C$ (hot temperature). The in situ compressive strengths of the mock-up walls were measured using cores drilled from the walls and compared with strengths estimated from various strength-maturity models considering the internal temperature rise owing to the hydration heat. The test results showed the initial apparent activation energies at the hardening phase were approximately 2 times higher than the apparent activation energies until the final setting. The differences between core strengths and field-cured cylinder strengths became more notable at early ages and with the decrease in the ambient curing temperature. The strength-maturity model proposed by Yang provides better reliability in estimating in situ strength of concrete than that of Kim et al. and Pinto and Schindler.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.10a
• /
• pp.115-118
• /
• 2005

Korea has experienced many changes since modern hospitals started to be built. Among these changes, interest in 'Promotion of Curing environment', which is the most fundamental one of the hospital functions, has increased more and more. The lobby makes the first impression of a medical building and that is an important function. Recently, the lobby became highly valued not only as a waiting area or a pathway only but as a cultural area. The lobby is considered simply as a complex and busy area because it plays an important role in the building' communications and access systems and has various uses and functions. Based on the concept of curing environment, the lobby can be planned as a facility combining culture and medical functions by applying multi therapy.