Anisotropic conducting film (ACF)을 형성하기 위해서는 경화과정에 잠재성이 있어야만 하며, 보다 빠른 생산성을 갖기 위해서는 반응속도가 매우 높아야 한다. 이 연구에서는 여러 가지의 sulfonium 염들을 합성해서 epoxy 수지의 잠재성 경화제로 사용해 보았다. 이들 sulfonium 염들은 모두 우수한 잠재성을 보여 주었다. Differential scanning calorimetry (DSC)를 이용해서 이들의 경화거동을 살펴보았으며, $150^{\circ}C$에서의 경화 속도를 탐침법으로 측정하였다.
In this work, nanocomposites of epoxy resin and chemically reduced graphene oxide (RGO) were prepared by thermal curing process. X-ray diffractions confirmed the microstructural properties of RGO. Differential scanning calorimetry was used to evaluate the curing behaviors of RGO/epoxy nanocomposites with different RGO loading amounts. We investigated the effect of RGO loading amounts on the mechanical properties of the epoxy nanocomposites. It was found that the presence of RGO improved both flexural strength and modulus of the epoxy nanocomposites till the RGO loading reached 0.4 wt%, and then decreased. The optimum loading achieved about 24.5 and 25.7% improvements, respectively, compared to the neat-epoxy composites. The observed mechanical reinforcement might be an enhancement of mechanical interlocking between the epoxy matrix and RGO due to the unique planar structures.
In this study, we investigate the thermal and mechanical properties of composites comprising ethylene propylene diene monomer (EPDM) and polybutadiene (PB) obtained using carbon black (CB) as a reinforcing and compatibilizing filler. Owing to the significance of elastomeric materials in various industrial applications, blending of EPDM and PB has emerged as a strategic method to optimize the material properties for specific applications. This study offers insights into the blend composition, its microstructure, and the resulting macroscopic behaviors, focusing on the synergetic effects of composite materials. Furthermore, this study delves into curing and rheological behaviors, crosslink densities, and mechanical, thermal, and elastic properties of the elastomeric composites. Through systematic exploration, we believe that this study will be beneficial to material scientists and engineers working on developing advanced elastomeric composites.
실제 FCM 교량에 적용되는 고강도 콘크리트의 시간의 다양한 양생 환경에서의 시간 의존적 거동을 평가하기 위해, 기건 및 도포, 습윤 환경에서의 100${\times}$100${\times}$400mm 각주형 공시체의 수축량을 측정하였다. 또한 상수와 10% CaCl$_2$ 수용액에 노출된 콘크리트의 3일 및 28일 재령에서의 압축크리프를 측정하였고, 일반적인 기건 및 도포 공시체의 실험 결과와 비교하였다. 도포와 습윤 양생 환경에 노출된 콘크리트의 시간 의존적 거동은 건조수축과 크리프 모두 상당한 차이를 보였다. 따라서 기존의 크리프 실험 방법으로 실제 콘크리트 구조물의 크리프와 건조수축을 측정하는 것에 대한 재고가 필요하다고 판단된다.
Glycerol diglycidyl ether와 acrylic acid를 반응하여 지방족 에폭시 아크릴레이트를 합성하였다. 반응 경과는 적외선 분광법, 라만 분광법과 $^1H$ NMR로 분석하였다. 합성한 에폭시 아크릴레이트의 전자선 조사에 의한 경화거동을 조사하기 위해 전자선 조사량에 따른 시료의 분광 분석과 유리전이온도 분석, 인장 특성 등을 분석하였다. 이를 통해 약 30 kGy 정도의 저조사량에서 충분한 경화가 이루어짐을 확인하였다. 또한 합성한 에폭시 아크릴레이트는 점도가 낮아 용매 사용 없이 코팅용으로 사용하기에 적합하며, 경화 시편이 높은 광학적 투과도를 가지고 있어 광학적 투명도를 요구하는 전자선 경화형 광학필름 코팅용에 적합할 것으로 생각된다.
본 연구에서는 불포화 폴리에스테르 수지의 글리콜 몰비에 따른 경화거동을 실험하였다. 경화과정은 Tanaka 강체진자(rigid-body pendulum)형 점탄성 모델과 differential scanning calorimetry(DSC)법을 이용하였다. 강체진자의 회전축부에 수지막을 형성하여 자유진동을 시키면 수지막의 점탄성 변화에 응답하여 pendulum의 진동주기 T 및 대수 감쇄율 ${\Delta}$가 변화한다. Pendulum의 회전축부에 있어서의 수지막의 역학적인 응답을 pendulum의 진동 운동으로 취급하고 T 및 ${\Delta}$를 이용, 수지막의 dynamic modulus(E') 및 modulus loss(E')을 구하는 계산식을 만들었다. 이 측정법과 계산식을 이용하여 불포화 폴리에스테르 수지의 경화과정에 있어서의 점탄성 변화를 추적하여 수지막의 경화성의 차이를 알 수 있었다. Neopentyl glycol(NPG)의 몰비가 증가할수록 진동주기의 감소폭 기울기에 의한 경화반응속도가 느리고, damping 값에 의한 점도값의 상승속도가 감소하는 경화거동을 고찰하였다.
Several aspects of polymer dispersed liquid crystal(PDLC) film properties make them interesting for display application. Most versions of PDLC materials are able to modulate light without the use of polarizers, which offers advantages in optical throughput(brightness) and viewing angle compared to polarizer-based display. In this papers, we attemped to doe minimum of remaining liquid crystals at polymer network for the liquid crystal-polymer composite (LCPC) films. In results, best phase separation behaviors turned out liquid crystal/monomer/oligomer mixture system.
본 연구는 Zirconia(zirconium oxide) 입자가 페놀수지 경화거동에 미치는 영향을 조사하였다. Zirconia 입자의 함량에 따른 페놀수지의 승온 및 등온 경화 거동을 분석하였다. Zirconia 함량을 달리한 페놀수지의 점도 및 열분해 특성을 조사하였다. DSC 분석으로부터 경화도와 경화율을 구하였다. 마지막으로 Zirconia 입자가 첨가된 페놀수지의 DSC 데이터로부터 경화 반응에 대한 활성화 에너지를 계산하였다. 그 결과 zirconia 함량이 높을수록 경화가 지연되고 경화에 필요한 활성화에너지가 더 커지는 경향이 나타났다. 또한 TGA를 이용한 열분해 분석 결과 Zirconia의 함량이 증가할수록 더 적은 중량감소가 관찰됐다. Carbon/Phenol 프리프레그의 표면 점착성은 Zirconia 함량에 따라 부분적으로 변화하였으나 유의한 영향은 없었다.
새로운 열잠재성 개시제로서 N-crotyl-N,N-dimethyl-4-methylanilinium hexafluoroan-timonate (CMH) 촉매가 diglycidylether of bisphenol A (DGEBA) 에폭시 양이온 중합계의 열적, 유변학적 특성 및 열정성에 미치는 영향에 대해 연구하였다. DSC에 의한 DGEBA/CMH 경화계의 열분석 결과, 본 경화계는 일정 온도까지 우수한 잠재성을 지닌 반응 기구임을 확인할 수 있었으며, 특히 개시제의 함량이 증가할수록 CMH의 높은 활성에 의해 DGEBA의 전환율 및 경화반응 속도가 증가하였다. 유변학적 특성은 레오미터를 사용하여 등온 조건 하, 저장 탄성율(G'), 손실 탄성율(G") 그리고 damping factor (tan $\delta$)를 구한 후 이들 데이터로부터 겔화 시간을 측정하였다. 실험 결과 경화 온도 및 CMH의 증가에 따른 활성의 차이로 인하여 에폭시 양이온 중합의 네트워크 구조 형성에 영향을 미쳐 겔화 시간이 단축됨을 알 수 있었다. 형성된 네트워크 구조의 열안정성은 TGA 분석을 통해 분해 활성화 에너지 및 열안정성 인자 등의 측정으로 고찰하였다.찰하였다.
본 연구에서는 DGEBA(diglycidyl ether of bisphenol A)를 사용한 에폭시/mercaptan 경화제의 경화 반응 거동을 에폭시/아민 유도체형 경화제와 비교하여 연구하였다. 경화 반응 거동은 DSC 분석에 의해 승온 및 등온의 조건에서 경화되는 과정을 연구하였다. DSC의 승온 실험에서는 Kissinger 법을 이용하였으며, 등온 실험에서는 Kamal의 속도모델을 이용하여 분석하였다. 결과적으로 활성화 에너지는 아민 유도체형 경화제를 사용하였을 때 약 40 kcal/mol이고, mercaptan 경화제를 사용하였을 때 약 28에서 19 kcal/mol로 -SH 관능기가 증가할수록 감소하였다. 에폭시/아민 유도체형 경화제는 약 $90^{\circ}C$ 이상에서 경화 반응이 개시되는 반면, 에폭시/mercaptan 경화제에서는 경화 반응 개시 온도가 약 $80^{\circ}C$ 이내로 낮아지고, 반응 속도가 상승하여 반응 시간이 10분 이내로 단축되었다. 또한 에폭시/mercaptan 경화제계는 자기 촉매 반응 모델을 따르는 것을 확인하였고 약 20~40%의 경화도에서 최대 반응속도를 나타내었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.