• The Korean Journal of Pain
• /
• 제10권2호
• /
• pp.274-277
• /
• 1997

The complex regional pain syndrome(CRPS) exhibit symptoms such as: abnormal skin color, temperature change, abnormal pseudomotor activity, edema. If CRPS is not treated appropriately at acute stage, then the affected extremity may become a useless, painful appendage. Treatment of CRPS by sympathetic blockade may be achieved by repeated intravenous regional guanethidine blocks, repeated anesthetic sympathetic blocks, surgical sympathectomy or oral sympatholytic therapy. We treated 29-year-old male patient with CRPS of left upper extremity by continuous cervical epidural blockade. Due to wound infection and dislocation of the epidural catheter, we inserted an implantable port system to inject the mixture of local anesthetics and small amount of morphine. After 10 months of treatment, patient was cured of symptoms and signs of CRPS and was able to resume a normal life.

• 한국연초학회지
• /
• 제8권1호
• /
• pp.41-48
• /
• 1986

This experiment was carries out to study on the effect of temperature raising rate to chemical composition of tobacco leaves during the midrib drying stage of flue-curing. The results were as follows : In the case of the temperature raising rate became more rapidly during midrib drying stage. It had a tendency to increase in oxailic acid, succinlc acid, ammonia, polyphenol; there was a large loss of total sugar, reducing sugar, malic acid, palmitic acid and linolenic acid; leaf color became more reddish; the leaf quality index value decreased, thereby the quality of external appearance deteriorated. It is desirable that the temperature raising rate had to be more slowly.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.117-118
• /
• 2011

The acid stained agents are able to make remarkably thin colored layers on concrete surfaces and have simple processes for applying them comparably. This study has examined properties of the reaction to acid stained agent and cement hydrate. We've observed that the C-S-W autoclave cured specimens contain less Calcium Hydroxide than the others and create tobermorite of C-S-H system crystalline and concluded that the reactions of acid stained agent become slowdown under C-S-W and cause light colors of specimens.

• 공업화학
• /
• 제9권1호
• /
• pp.58-65
• /
• 1998

에폭시계 분체도료에 사용되고 있는 경화제로는 치환 dicyandiamide(Sub-DICY), 촉진 dicyandiamide(Acc-DICY), trimellitic anhydride(TMA), pyromellitic dianhydride(PMDA), Phenolic curing agent(Ph.C.A.)등이 사용되고 있다. 본 연구는 상기 5가지의 에폭시 경화제를 사용해서 제조한 에폭시 분체도료를 적합한 경화조건에서 완전히 경화시킨 뒤 여러 가지 실험기기 및 분석기기를 이용해서 경화된 도막 $T_g$, 인장강도, 파단신율, 경도, 내마모성등의 기계적 물성을 측정하였다. 그리고 흡수율, 내산성, 내알카리성등의 화학적물성, 전기적특성, 방식성등을 측정함으로써 경화제의 종류에 따른 에폭시 도막의 화학구조가 도막의 물성에 미치는 영향을 비교하였다. 그 결과 Phenolic curing agent는 toughness가 우수하지만 온도에 따른 색상 변화가 크고 산무수물 경화제는 전기절연성과 온도에 따른 색상안정성이 우수하지만 toughness와 부착성이 부족하고 DICY계는 흡수율과 온도에 따른 색상변화가 큰 특성을 나타내었다.

• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.69-81
• /
• 2005

The objective of this study was to evaluate the toothbrush abrasion characteristics of class V restorations. Thirty extracted human premolars, which were collected from oral surgery clinics were used. We mounted five teeth in a metal ring mold of 50 mm in diameter and 15 mm in height using chemically cured acrylic resin. Class V cavities were prepared in lingual cervical root surfaces and restored using one of following restorative materials : Dentin Conditioner/Fuji II LC (Group FL), All Bond II/Z-250 (Group ZT), One-up Bond F/Palfigue Estelite (Group PE), F2000 Primer/Adhesive (Group FT), and Prime & Bond 2.1/Dyract AP (Group DR). They were stored under distilled water at $37^{\circ}C$ for seven days. The toothbrush abrasion test was conducted using a wear testing machine of pin-on disk type under a load of 1.5 N for 100,000 cycles. We have examined the bonded interfaces, the changes of surface roughness and color of abraded surfaces. From this experiment, the following results were obtained. 1. The change of surface roughness showed high degree: RMGIC>compomer>composite resin (p<0.05). 2. Because of the protrusion and missing of filler particles, SEM observation of abraded surfaces of RMGIC and compomers revealed the increase of surface roughness due to the selective removal of matrix resin. 3. The color change by toothbrush abrasion was affected in large part by the change of $L^*$ and $b^*$ of resin composites (p<0.05). 4. The color change by toothbrush abrasion was so small to detect by human eyes. 5. SEM observation of abraded surfaces revealed the interface bonding was the best in the FT group.

• 한국미생물·생명공학회지
• /
• 제10권4호
• /
• pp.289-295
• /
• 1982

Streptomyces bobili (YS-40) 의 Hg, Ag, penicillin-G, ampicillin, chloramphenicol, oxytetracycline, streptomycin, kanamycin에 대한 생육최소저해농도는 각각 15, 10, >3,000, >100, >1,000. >100. <5, <5 $\mu\textrm{g}$/$m\ell$였으며 본 균주의 R-plasmid를 제거시키기 위하여 ethidium bromide, acriflavine, sodium dodecyl sulfate 등의 curing agent를 처리시킨 결과를 요약하면 다음과 같다. Ethidium bromide를 10$\mu\textrm{g}$/$m\ell$의 농도로 처리했을 때 98.0% 정도의 R-plasmid를 제거시킬 수 있었다. pH 7.0에서 curing시킴으로서 R-plasmid가 가장 잘 제거되었으며 분균을 24시간동안 배양해서 curing시킴으로서 R-plasmid의 제거율이 가장 높게 나타났다. Ethidium bromide에 의해서 R-plasmid가 제거된 균과 원균을 여러가지 색소생성배지에서 배양시켜 배양상의 특성을 조사해 본 결과 peptone-beef extract agar 배지에서 aerial mass color가 greyish pink에서 grey로 변했으며 tryptone-yeast extract broth에서 배지에서 soluble pigment가 pale brown에서 무색으로 변했다. 이 결과로는 aerial mycelium, melanin 생성과 R-plasmid 는 무관하다고 추측된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권8호
• /
• pp.1174-1180
• /
• 2014

This study was done to investigate the quality properties of beef jerky with soy sauce, red pepper paste, and soybean paste replacing salt. Sliced beef samples were cured in salt (control), soy sauce, red pepper paste, and soybean paste for 24 or 48 h and then dried at $70^{\circ}C$ for 8 h. Treatments showed higher final moisture content and lower $Na^+$ concentration than the control after drying for 8 h. The lightness and shear force values were lower in all treatment samples than in the control during 48 h of curing time. In particular, lower lipid oxidation was found in the jerky cured with red pepper paste than in the control. Sensory evaluation showed that color, flavor, and tenderness of jerky samples were improved by replacing salt with soy sauce, red pepper paste and soybean paste, and higher likeability scores of the beef jerky were obtained among those treatments after 48 h of curing time.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.482-486
• /
• 2000

The purpose of the present study was first, to evaluate the relationship between composite surface conversion and surface discoloration, second, to know if there was difference in surface discoloration between celluloid-strip-finished composite surface and polished surface. In addition, the discoloration of composite surface was also evaluated with visual inspection or digital camera with high resolution monitor, Z100, Tetric Ceram, Spectrum, and Aelitfil were used. The composite surfaces were celluloid-strip finished (group 1), polished (group 2), celluloid-strip finished under nitrogen gas purging (group 3) or only light cured without finishing or polishing under nitrogen gas purging (group 4). The microhardness of each samples were also measured in each group. The samples of each group were also divided into 4 subgroup whether they were immediately placed in disclosing solution (0.2% Elythrosin, pH 7.0) (subgroup1), 1 day after light curing(subgroup 2), 3day after light curing(subgroup 3) or 7 day after light curing(subgroup 4). The computer controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$, $b^*$). The amounts of color difference were compared. The results were as follows; 1. There was no difference in discoloration between celluloid strip finished composite surface and polished surface. 2. The samples discolored more when they were placed in disclosing solution immediately after polymerization than other groups. 3. When the samples were light cured under nitrogen gas purging and without polishing process, they discolored more than other groups even though they showed higher micro hardness. 4. With visual inspection or digital camera, only a limited information was available in detecting composite surface discoloration.

• 한국작물학회지
• /
• 제28권2호
• /
• pp.248-251
• /
• 1983

차관율을 달리하여 Burley 21을 공시하고 급건엽 및 품질에 미치는 영향을 구명하고자 시험한 결과를 요약하면 다음과 같다. 1. 온도는 차광량이 적을수록 높았으며 상대온도는 떨어졌다. 2. 줄말림시 엽면에서 받는 광량은 10%미만으로 그 양이 적었다. 3. 건조경과는 차광량이 적을수록 빨랐으며, 급건엽도 더 발생하였다. 4. 품질은 처리간 유의차가 없었으나 물리성 및 연소성은 차광량이 적은 처리에서 떨어졌다. 이와 같이 차광효과는 실제 엽면에 수광량이 적어서 주로 온습도의 영향으로 보며 충분한 환기로 급건엽을 방지할 수 있을 것으로 본다.

• Restorative Dentistry and Endodontics
• /
• 제36권2호
• /
• pp.108-113
• /
• 2011

연구목적: 여러 광개시제 시스템에 의해 활성화되는 복합 레진을 기존의 single-peak LED와 최신의 dual-peak LED로 광중합하였을 때의 누프 미세 경도와 수중 보관 후의 색 안정성 차이를 알아보기 위한 것이다. 연구 재료 및 방법: Camphorquinone이 광개시제로 포함되어 있는 Z100과 다른 광개시제가 포함되어 있는 것으로 알려진 Tetric Ceram과 Aelite LS Posterior를 유리판 위에서 테플론 주형(직경 8 mm, 두께 2 mm) 내로 충전하고, single-peak LED와 dual-peak LED로 광중합하였다. 중합 후 누프 미세 경도를 측정하였고 한 달 후 색 변화를 측정하였다. 광중합기간의 미세 경도와 색 변화 차이를 student t-test로 분석하였다. 결과: 모든 레진에서 dual-peak LED로 광중합하였을 때 미세 경도가 높게 나타났다. 색 안정성 역시 dual-peak LED로 광중합하였을 때 높게 나타났으나 Aelite LS Posterior에서만 통계학적으로 유의한 차이가 있었다. 결론: 다른 광개시제가 포함되어 있는 복합 레진을 dual-peak LED로 광중합한 경우 미세 경도와 색 안정성에 있어서 더 좋은 결과를 얻을 수 있었다.