• Journal of KIISE:Software and Applications
• /
• v.37 no.8
• /
• pp.647-652
• /
• 2010

Esterel is an imperative synchronous language well-adapted to control-intensive systems. When an Esterel program is translated to a circuit, the synchronizer of a parallel statement may be executed more than once in a clock; the synchronizer is called schizophrenic. Existing compilers cure the problems of schizophrenic parallel synchronizers using logic duplications. This paper proposes the conditions under which a synchronizer causes no problem in circuits when it is executed more than once in a clock. In addition we design a detection algorithm based on those conditions. Our algorithm detects schizophrenic parallel synchronizers that have to be duplicated in Esterel source codes so that compilers can save the size of synthesized circuits

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.667-672
• /
• 2004

Poly(ethylene terephthalate) (PET) fabrics were treated with a silica particle and phosphate flame retardant to determine the optimum process condition of the digital textile printing(DTP) media. The treating conditions for the study were 6 conditions, from F1 to F6, in which F3, F4 and F5 were treated with mixture of both silica particle and phosphate compound in process of pad, dry and cure fixation. F6 was treated with phosphate compound only and silica particle coating successively. Xanthan gum was used to control the migration of liquid phosphate compound onto PET fabrics. The change in surface morphology of fabrics treated with silica particle and phosphate compound was observed by SEM and flame retardance was evaluated by limiting oxygen index(LOI). It was observed that F6 was the excellent flame retardance and low bleeding in printing, Collectively, the printing characteristics of silica to cyan, magenta, yellow and black ink and flame retardance of fabrics finished with phosphate compound were identified in this study.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.4
• /
• pp.655-663
• /
• 2012

Objectives : This study was progressed a research with the aim of using it as basic data necessary for a plan in order to increase qualitatively medical level for patients who feel anxiety about dental treatment, and of offering basic data for improving the whole medical services by grasping conditions and satisfaction level with laser therapy in patients who visited dental clinic. Methods : The statistical analysis was carried out t-test and ANOVA by using SPSS(PASW statistics) 18.0. When there is statistically significant difference in analysis of variance, post-test was carried out by using Duncan multiple range test. Results : In therapy kinds of using laser, gingival treatment was the largest with 37.0%. It was the highest in likely seeming to be not painful with 32.9% as for a decisive factor, which came to receive laser therapy, and in having been enough to endure even if having been slightly tingling as for pain level. Conclusions : This study can be considered to have significance in changing recognition of medical cure by surveying patients satisfaction with using laser as a method for slightly solving elements of fear and anxiety about dental treatment and to have its value as basic data for seeking improvement plan for diverse medical services in the future.

• Korean journal of food and cookery science
• /
• v.22 no.6 s.96
• /
• pp.930-939
• /
• 2006

Classifying Fruits recorded in Tangaekpyeon of Donguibogam and Sikgamchalyo of Jeongjoji of Limwonsibyukji and comparing the types, features, efficacy and side effects based on Kimi Theory(氣味), we found forty one fruits in Donguibogam and forty eight in Limwonsibyukji. As well as fresh fruits, soup, gruel, dry fruit, and powder, peel, stem, leaf, and root were also used. According to the literature, Fruits are classified by five conditions(五氣) and five tastes(五味) and many are mild with sweet taste or warm with sweet and sour taste. They are efficacious in protecting the five viscera, building up energy, controlling heat, calming febrile diseases, promoting urination and excretion, antidiarrhetic, calming cholera morbus, improving skin condition calming the stomach, neutralizing poisonous effects and improving eyesight. To help prevent and cure diseases, those with cold physical constitution must take warm Fruits to vitalize their physiology and those with hot physical constitution cold Fruits for balance. To improve their physical health, our ancestors tried to control their bio rhythm with food and medicinal material and promoted health and prevented diseases by taking such food. We therefore expect that we can have a healthy dietary life by taking advantage of the five conditions and five tastes of Fruits and continuing the spirit of Korea traditional food culture.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.56-62
• /
• 2024

By introducing curing kinetics and chemo-rheology for the epoxy resin formulation for ultra-high voltage gas insulated switchgear (GIS) Insulating Spacers, a study was conducted to simulate the curing behavior, flow and warpage analysis for optimization of the molding process in automatic pressure gelation. The curing rate equation and chemo-rheology equation were set as fixed values for various factors and other physical property values, and the APG molding process conditions were entered into the Moldflow software to perform optimization numerical simulations of the three-phase insulating spacer. Changes in curing shrinkage according to pack pressure were observed under the optimized process conditions. As a result, it was confirmed that the residence time in the solid state was shortened due to the lowest curing reaction when the curing holding pressure was 3 bar, and the occurrence of deformation due to internal residual stress was minimized.

• Composites Research
• /
• v.30 no.2
• /
• pp.116-125
• /
• 2017

The purpose of this study is to develop silicon carbide fiber showing an excellent mechanical properties under highly oxidative conditions at high temperature. Polycarbosilane(PCS) as a preceramic precursor was used for making the SiC fiber. PCS fiber was taken by melt spinning method followed by melting the PCS at $300{\sim}350^{\circ}C$ in N2 gas. The Curing of PCS fiber was carried out in air oxygen chamber, prior to high temperature pyrolysis. Degree of cure was calculated by characteristic peak's ratio of Si-H to $Si-CH_3$ in FT-IR spectra before and after curing of PCS fiber. The properties of SiC fiber was affected greatly by the degree of cure. The SiC fiber produced by controlling fiber tension during heat treatment showed good properties. The SiC fiber exposed to $1000^{\circ}C$ at air from 1 min. up to maximum 50 hrs showed around 60% reduction in tensile strength. We found that large amount of carbon content on the fiber surface after long-term exposure has resulted in lower tensile strength.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.117-124
• /
• 2003

Reinforced concrete structures under sever conditions such as marine structures, bridges and structures constructed with aggregates(dredged from sea), can be deteriorated from corrosion of the reinforcing bars. The purpose of this study is to evaluate the anti-corrosive performance of coated steel using polymer cement slurry. Polymer cement slurry with various polymer dispersions and corrosion inhibiting agent were coated to the surface of bars, and tested for accelerated corrosion tests. Tests include immersion in NaCl 10% solution, chloride ion spray, autoclave cure, autoclave cure after carbonation, penetration of NaCl 10 % solution, carbonation after penetration of NaCl 10% solution. Test results, show that the anti-corrosive performace is considerably improved by using polymer cement slurry at surface of steel. And this trend is marked by adding of corrosion inhibiting agent. This difference of the anti-corrosive properties is hardly recognized according to types of polymer dispersions. The coated steel using polymer cement slurry will be improved to a great extent compared to those of plain steel when increasing content of chloride ion in cement concrete.

• Geomechanics and Engineering
• /
• v.6 no.5
• /
• pp.469-485
• /
• 2014

A series of bearing capacity tests was conducted with eccentrically loaded model surface and shallow strip footings resting close to a slope to investigate behavior of such footings (ultimate loads, failure surfaces, load-displacement curves, rotation of footing, etc.). Ultimate loads of footing close to slope decreased with increasing eccentricity for both surface and shallow footings. Failure surfaces were not symmetrical, primary failure surfaces occurred on the eccentricity side (the slope side) and secondary failure surfaces occurred on the other side. Lengths of failure surfaces decreased with increasing eccentricity. Footings always rotated towards eccentricity side a few degrees. For eccentrically loaded footing, decrease in ultimate load with increasing eccentricity is roughly in agreement with Customary Analysis.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.144.2-144.2
• /
• 2010

Bipolar plate는 고분자 전해질 연료전지(PEMFC)에서 핵심 부품 중의 하나이고, 전해질 막이나 촉매 등에 비해서는 상대적으로 쉽게 접근할 수 있기 때문에 많은 연구가 수행되고 있다. Bipolar plate를 제조하는 기술은 크게 금속을 프레스 가공하는 방법, graphite 판을 직접 밀링하는 방법 및 고분자/카본계의 press molding 법 등 3가지로 분류되며, 본 연구에서는 3번째 방법에 의해서 bipolar plate를 대량 생산하는 방법에 대해 연구하였다. 고분자 매트릭스는 에폭시계 수지를 사용하였고, 카본계 재료는 graphite 분말과 carbon nanotube를 사용하였다. 이들 재료들을 일정한 비율로 혼합한 후 differential scanning calorimetry(DSC)를 사용하여 열분석 하였고, 그 결과를 Kissinger equation에 대입하여 경화반응 속도론을 연구하였다. 또한, 경화된 에폭시/탄소 복합재료의 전기전도도, 유리전이온도, 표면에너지 특성 등을 분석하였다.

• Structural Engineering and Mechanics
• /
• v.62 no.1
• /
• pp.97-106
• /
• 2017

This paper discusses an experimental programme that was carried out to study the effects of specimen size-shape and type of moulds on the compressive strength of concrete. For this purpose, cube specimens with 150 mm dimensions, cylinder specimens with $150{\times}300mm$ dimensions, and prism specimens with $150{\times}150{\times}375mm$ dimensions were prepared. The experimental programme was carried out with several concrete compositions belonging to strength classes C20/25, C25/30, C30/37, C40/50 and C60/75. Furthermore, the test results were curve-fitted using the least squares method to obtain the new parameters for the modified size effect law.