• 제목/요약/키워드: cumulative distribution

검색결과 685건 처리시간 0.028초

부분 중계노드 선택 기반의 협력 네트워크에서 증폭 후 전송 방식에 대한 성능분석 (Performance Analysis of Amplify-and-Forward Relaying in Cooperative Networks with Partial Relay Selection)

  • 황호선;안경승
    • 한국통신학회논문지
    • /
    • 제40권12호
    • /
    • pp.2317-2323
    • /
    • 2015
  • 본 논문에서는, 증폭 후 재전송하는 부분 릴레이 선택 방식의 듀얼홉 릴레이 시스템에 대한 성능을 분석한다. 증폭 후 재전송하는 릴레이 이득은 채널과 잡음을 동시에 고려한 이득이다. 수신 SNR 모델을 이용하여 닫힌형태의 end-to-end SNR 확률밀도함수와 누적분포함수를 유도한다. 또한, 부분 릴레이 선택 방식을 갖는 듀얼홉 릴레이 시스템의 정확한 닫힌 형태의 채널 용량을 분석한다. 마지막으로 본 논문의 이론적인 분석은 Monte-Carlo 시험을 통하여 검증한다.

단섬유보강 금속복합재료의 반복적 변형 및 피로특성 (Cyclic Deformation and Fatigue Behavior of Short Fiber Reinforced Metal Matrix Composites)

  • 양유창;송정일;한경섭
    • 대한기계학회논문집
    • /
    • 제19권6호
    • /
    • pp.1422-1430
    • /
    • 1995
  • Al6061 alloy reinforced with 15 volume% of Saffil fibers was fabricated by squeeze infiltration method. Uniform distribution of reinforcements and good bondings between reinforcements and matrix alloy were found in the microstructure of composites. Comparing with A16061 matrix alloy, tensile strength and elastic modulus of $Al_{2}$O$_{3}$/Al composites were increased up to 26% and 31%, respectively. Cyclic deformation and fatigue behavior of $Al_{2}$O$_{3}$/Al metal matrix composites were studied. The specimens were cycled using tension-tension(R=0.1) loading and under load controlled fatigue test. Cyclic stress-displacement curve through fatigue test was obtained. Fatigue strength of $Al_{2}$O$_{3}$/Al composites was about 200 MPa, i.e.0.55 of applied stress level(q). During fatigue test, $Al_{2}$O$_{3}$/Al composites displayed cyclic hardening at all applied stress levels. The most of resultant displacement due to permanent plastic deformation occurred in less than the first 5% of fatigue life. Displacement-to-failure of the fatigue test was smaller than that of the tensile test because of accumulative damage by cumulative plastic deformation.

마이크로바이오칩의 전기신호검출 시스템에 관한 연구 (A Study on an Electrical Biosignal Detection System for the Microbiochip)

  • 박정연;박재준;권기환;조남규;안유민;이성환;황승용
    • 한국정밀공학회지
    • /
    • 제22권4호
    • /
    • pp.181-187
    • /
    • 2005
  • In this study, a microchip system fabricated with MEMS technology was developed to detect bioelectrical signals. The developed microchip using the conductivity of gold nanoparticles could detect the biopotential with a high sensitivity. For designing the microchip, simulations were performed to understand the effects of the size and number of nanoparticles, and the sensing width between electrodes on the detection of biosignals. Then, a series of experiment was performed to validate the simulation results and understand the feasibility of the proposed microchip design. Both simulation and experimental results showed that as the sensing width between electrodes increased the conductivity decreased. Also, the conductivity increased as the density of gold nanoparticles increased. In addition, it was found that the conductivity that changes with the nanoparticles density could be approximated by a cumulative normal distribution function. The developed microchip system could effectively apply when a biosignals should be measured with a high sensitivity.

기상 데이터 산정 기간에 따른 국내의 설계용 외기온도 분석 (Analysis of South Korea Outdoor Design Temperature with respect to Assigned Period of the Weather Data)

  • 남아영;김영일;정광섭
    • 한국지열·수열에너지학회논문집
    • /
    • 제13권2호
    • /
    • pp.1-8
    • /
    • 2017
  • Outdoor design temperature is important for selecting proper capacity of heating and cooling systems of a building to implement indoor thermal comfort and save energy consumption. The purpose of this study is to investigate the change of South Korea outdoor design temperature according to the assigned period. When outdoor design temperature of 8 locations calculated with the latest weather data during 2008~2015 years using ASHRAE Bin method are compared to the standard temperature of Ministry of Land, Infrastructure and Transport which is widely used for designing South Korea air-conditioning system at present, the maximum temperature difference becomes $0.97^{\circ}C$ for cooling, and $1.94^{\circ}C$ for heating. Due to wide outdoor temperature variation, update of outdoor design temperature based on recent weather data is recommended.

Properties of Optically Selected Supernova Remnants in M31

  • Lee, Jong Hwan;Lee, Myung Gyoon
    • 천문학회보
    • /
    • 제38권2호
    • /
    • pp.61.2-61.2
    • /
    • 2013
  • We present a study of optically emitting supernova remnants (SNRs) in M31 based on $H{\alpha}$ and [S II] images in the Local Group Survey. Using these images, we have selected objects that have [S II]:$H{\alpha}$ > 0.4 and morphology for typical SNRs. We find 76 new SNRs. We have also inspected 233 SNR candidates presented in previous studies, confirming that only 80 of them are SNRs. Combining these, we produce a master catalog of 156 SNRs in M31. We classify these SNRs according to two types of criteria: the SNR progenitor types (Type Ia and core-collapse (CC) SNRs) and the morphological types. Type Ia and CC SNRs are 23% and 77%, respectively, of the total sample. Most of CC SNRs are concentrated along the spiral arms, while Type Ia SNRs are rather spread over the entire galaxy including the inner region. CC SNRs are brighter in $H{\alpha}$ and [S II] than Type Ia SNRs. The cumulative size distribution of the SNRs with 15 < D < 50 pc is well fitted by a power law with an index, ${\alpha}=2.53{\pm}04$. It indicates that most SNRs in M31 are in Sedov-Taylor phase. Properties of these SNRs show little variation depending on the galactocentric distance. The $H{\alpha}$ and [S II] surface brightness shows a good correlation with X-ray luminosity for the SNRs that are center-bright.

  • PDF

A Model to Explain Temperature Dependent Systemic Infection of Potato Plants by Potato virus Y

  • Choi, Kyung San;Toro, Francisco del;Tenllado, Francisco;Canto, Tomas;Chung, Bong Nam
    • The Plant Pathology Journal
    • /
    • 제33권2호
    • /
    • pp.206-211
    • /
    • 2017
  • The effect of temperature on the rate of systemic infection of potatoes (Solanum tuberosum L. cv. Chu-Baek) by Potato virus Y (PVY) was studied in growth chambers. Systemic infection of PVY was observed only within the temperature range of $16^{\circ}C$ to $32^{\circ}C$. Within this temperature range, the time required for a plant to become infected systemically decreased from 14 days at $20^{\circ}C$ to 5.7 days at $28^{\circ}C$. The estimated lower thermal threshold was $15.6^{\circ}C$ and the thermal constant was 65.6 degree days. A systemic infection model was constructed based on experimental data, using the infection rate (Lactin-2 model) and the infection distribution (three-parameter Weibull function) models, which accurately described the completion rate curves to systemic infection and the cumulative distributions obtained in the PVY-potato system, respectively. Therefore, this model was useful to predict the progress of systemic infections by PVY in potato plants, and to construct the epidemic models.

분위수의 점근적 분산을 이용한 신뢰성 설계 (Reliability Design using Asymptotic Variance of Inverse Cumulative Distribution Function)

  • 조형진;백석흠;홍순혁;조석수;주원식
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.1682-1685
    • /
    • 2005
  • System algorithms estimated by deterministic input may occur the error between predicted and actual output. Especially, actual system can't predict the exact outputs due to uncertainty and tolerance of input parameters. A single output to a set of inputs has a limited value without the variation. Hence, we should consider various scatters caused by the load assessment, material characteristics, stress analysis and manufacturing methods in order to perform the robust design or estimate the reliability of structure. The system design with uncertainty should perform the probabilistic structural optimization with the statistical response and the reliability. This method calculated the probability distributions of the characteristics such as stress by combining stress analysis, response surface methodology and Monte-Carlo Method and got the probabilistic sensitivity. The sensitivity of structural response with respect to inconstant design variables was estimated by fracture probability. Therefore, this paper proposed the probabilistic reliability design method for fracture of uncorved freight end beam and the design criteria by fracture probability.

  • PDF

식도암의 임상적 고찰 (Clinical Evaluation of Esophageal Cancer)

  • 현명섭;임승균;정광진
    • Journal of Chest Surgery
    • /
    • 제28권3호
    • /
    • pp.280-286
    • /
    • 1995
  • In our hospital we have seen 38 cases of esophageal cancer from June 1984 until June 1994. They composed of 34[89% men and 4[11% women, their age distributed from 35 to 74, mean age was 57.55 7.43. Their symptoms were varied, dysphagia[97% , pyrosis[58% , chest pain[31% , weight loss[31% , anemia[8% , vomiting[5% , and hoarseness[1% . Surgical treatment was done with esophagectomy and upper GI reconstruction 35 cases, and palliative gastrostomy was 3 cases. There was no operative mortality, and operative morbidity was 8 cases of anastomotic leakage, 5 cases of wound infection, 5 cases of pleural effusion, hoarseness, pneumothorax, and lung abscess. Pathologic lesion distribution: upper thoracic esophagus 6 cases[16% , middle thoracic esophagus 17 cases[45% , and lower thoracic esophagus 15 cases[39% . There was no statistical difference of transhiatal esophagectomy and transthoracic esophagectomy in complications and hospitalization period in this study but we proved the superiority of gastric upper GI reconstruction rather than colon upper GI reconstruction in anastomotic leakage and hospitalization period. Cumulative survival rate was 76.2% in 1 year survival, 33.9% in 3 year survival, 25.4% in 5 year survival, 12.7% in 10 year survival. There was no relationship with the time of dysphagia with survival in this study.

  • PDF

L-Moments법에 의한 낙동강유역 월강우량의 지역가뭄빈도해석 (Regional Drought Frequency Analysis of Monthly Precipitation with L-Moments Method in Nakdong River Basin)

  • 김성원
    • 한국환경과학회지
    • /
    • 제8권4호
    • /
    • pp.431-441
    • /
    • 1999
  • In this study, the regional frequency analysis is used to determine each subbasin drought frequency with reliable monthly precipitation and the L-Moments method which is almost unbiased and has very nearly a normal distribution is used for the parameter estimation of monthly precipitation time series in Nakdong river basin. As the result of this study, the duration of '93-'94 is most severe drought year than any other water year and the drought frequency is established as compared the regional frequency analysis result of cumulative precipitation of 12th duration months in each subbasin with that of 12th duration months in the major drought duration. The Linear regression equation is induced according to linear regression analysis of drought frequency between Nakdong total basin and each subbasin of the same drought duration. Therefore, as the foundation of this study, it can be applied proposed method and procedure of this study to the water budget analysis considering safety standards for the design of impounding facilities large-scale river basin and for this purpose, above all, it is considered that expansion of reliable preciptation data is needed in watershed rainfall station.

  • PDF

안정적 사람 검출 및 추적을 위한 검증 프로세스 (Verification Process for Stable Human Detection and Tracking)

  • 안정호;최종호
    • 한국정보전자통신기술학회논문지
    • /
    • 제4권3호
    • /
    • pp.202-208
    • /
    • 2011
  • 최근 들어 인간과 컴퓨터의 상호작용을 통해 컴퓨터 시스템을 제어하는 기술에 관한 연구가 진행되고 있다. 이러한 응용분야의 대부분은 얼굴검출을 통해 사용자의 위치를 파악하고 사용자의 제스처를 인식하는 방법을 포함하고 있으나, 얼굴검출 성능은 아직 미흡한 실정이다. 사용자의 위치가 안정적으로 검출되지 못 하는 경우에는 제스처 인식 등의 인터페이스 성능은 현격하게 저하된다. 따라서 본 논문에서는 피부색과 얼굴검출의 누적 분포를 이용하여 동영상에서 안정적으로 얼굴을 검출할 수 있는 알고리즘을 제안하고, 실험을 통해 알고리즘의 유용성을 증명하였다. 제안한 알고리즘은 대응행렬 분석을 적용하여 사람을 추적하는 분야에 응용이 가능하다.