• Journal of Biosystems Engineering
• /
• 제34권5호
• /
• pp.325-330
• /
• 2009

This study was performed to develop accelerated life test methods for agricultural tractor transmission receiving variable load. To acquire parameters for calculation of accelerated life test, endurance tests were performed under different torque conditions. Test results showed that the shape factor of Weibull distribution was 1.5 and fatigue damage exponent was 5.4. The calculated test time was 5,877 hours under the conditions of average life (MTBF) 3,000 hours and 90% reliability for one test sample. According to the linear cumulative damage rule, test time could be reduced using increased test load. Test time could be reduced by 252 hours when 1.2 times of the rated load compared with 0.67 times of the rated equivalent load calculated by load spectrum of the agricultural tractor. Calculated acceleration coefficient was 23.3.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.882-885
• /
• 2002

Assessing the condition of air insulation by measuring electromagnetic wave generated in it by partial discharges gives warning of developing faults and breakdown which may give some bad effects to other thing concerned with it. Electromagnetic wave are taken from UHF antenna with 20k ~ 2GHz frequency range. The signal waveform and FFT(Fast Fourier Transform) results from UHF antenna for PD(partial discharge) generated from two different electrode(needle-plane, needle-needle) configurations are shown and it is processed by using PRPD($\Phi-q-n$ distribution) method. Cumulative pulse sequence during 100 period is compared with PRPD method. This also will show the possibility of making apparent distinction between two PD sources.

• Journal of the Korean Data and Information Science Society
• /
• 제26권1호
• /
• pp.271-280
• /
• 2015

In this paper, the maximum likelihood estimators for parameters are derived under three step-stress accelerated life tests for Type-I hybrid censored data. The exponential distribution and the cumulative exposure model are considered based on the assumption that a log quadratic relationship exits between stress and the mean lifetime ${\theta}$. The test plan to search optimal stress change times minimizing the asymptotic variance of maximum likelihood estimators are presented. A numerical example to illustrate the proposed inferential procedures and some simulation results to investigate the sensitivity of the optimal stress change times by the guessed parameters are given.

• 물과 미래
• /
• 제23권2호
• /
• pp.213-225
• /
• 1990

본 연구는 불규칙한 단면을 가지면서 완곡을 이루는 일반하천에서 공장이나 가정으로부터 방류되는 오염물질의 횡확산현상을 예측하기 위한 수치모형을 제안하였다. 이 수치모형은 자연좌표계와 누적유량개념을 도입하였으며 여기에 필요한 여러가지 요소들을 직접측정하지 않고 컴퓨터 프로그래밍을 통하여 간단히 결과를 얻을수 있는 효율적인 방법을 개발하여 실험결과와 비교검토하므로서 본수치모형의 현지적용성을 검토하였다.

• 응용통계연구
• /
• 제3권1호
• /
• pp.105-120
• /
• 1990

이 논문에서는 통계량의 누적합을 이용하여 누적합 검정을 정의하고 그 특성에 대해 연구하였으며, 축차확률비 검정과의 상대효율을 정의하였다. 누적합 검정의 검사특성함수와 평균표본수는 Wald의 근사공식과 Wiener과정 근사에 의해 표현될 수 있음을 보였다. 또한 누적합 검정에서 축차확률비 검정과 점근적으로 동일한 효율성을 나타내는 통계량을 선정할 수 있음을 보였다. 관측값이 지수 분포를 할 때 누적합 검정과 축차확률비 검정의 효율을 예를 들어 비교해 보았다.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.71-78
• /
• 2014

Although the fatigue design curve of ASME Code has enough margin with respect to alternating stress and cycles, the welding residual stress(WRS) should be included in fatigue analysis. In this paper, WRS distribution in a nozzle with dissimilar metal weldment was obtained by finite element analysis and was added in fatigue analysis. The fatigue analysis was performed by following the ASME Code including thermal and stress analysis applying with postulated 30 transient conditions. The calculated results of a cumulative fatigue usage factors(CUF) were compared for the case of the models with or without WRS effects. The results showed that the CUF at weldment and heat affected zone was affected by the WRS.

• Steel and Composite Structures
• /
• 제10권4호
• /
• pp.331-348
• /
• 2010

Ample research effort has been oriented into developing damage indices with the aim of estimating in a reasonable manner the consequences, in terms of structural damage and deterioration, of severe plastic cycling. Although several studies have been devoted to calibrate damage indices for steel and reinforced concrete members; currently, there is a challenge to study and calibrate the use of such indices for the practical evaluation of complex structures. The aim of this paper is to introduce an energy-based damage index for multi-degree-of-freedom steel buildings that accounts explicitly for the effects of cumulative plastic deformation demands. The model has been developed by complementing the results obtained from experimental testing of steel members with those derived from analytical studies regarding the distribution of plastic demands on several steel frames designed according to the Mexico City Building Code. It is concluded that the approach discussed herein is a promising tool for practical structural evaluation of framed structures subjected to large energy demands.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권3호
• /
• pp.177-183
• /
• 1999

This paper presents how to evaluate the transformer damage caused by reclosing scheme at the distribution substation. We describe a quantitative relationship between the reclosing scheme and the number of fault current flowing through transformer wsing the probability of a reclosing success/failure. The transformer damage from reclosing scheme is presented using a weight function and a damage function. A weight function is associated with the number of reclosing attempts and the reclosing deadtime to consider cumulative stress caused by reclosing scheme. A damage function is associated with a transformer impact ratio and a transformer functional life. In the case study, the transformer damage is simulated for the probability of a reclosing success. And the evaluation of transformer damage using KEPCO's operation data is performed.

• 대한안전경영과학회지
• /
• 제24권2호
• /
• pp.11-16
• /
• 2022

When picking up cargo, workers manually load and unload the cargo. Workers have different intensity of work depending on the amount and weight of cargo. In particular, as the intensity of manual work increases, workers are exposed to cumulative traumatic diseases. A manual for picking safety work for workers cargo handling in the distribution center is required. In this study, the worker's picking safety work based on the cargo volume and weight was presented as an experimental design model. Like the research results, the disease begins when the worker feels the number of pains presented by the model.

• 대한토목학회논문집
• /
• 제28권4B호
• /
• pp.363-374
• /
• 2008

국내에서 수공구조물의 설계를 위한 확률강우량을 산정하기 위해서 널리 사용되는 강우강도식은 주로 회귀분석을 적용한 형태가 일반적이지만, 본 연구에서는 각 지점별 적정확률분포형의 누가분포함수를 활용하여 강우강도식의 형태를 결정하고, 매개변수는 유전자알고리즘을 적용하여 추정하는 강우강도식을 제안하고자 한다. 기존에 사용하던 강우강도식과의 정확도 비교를 위하여 기상청 22개 지점에 대한 재현기간, 지속기간별 평균제곱근오차, 평균제곱근 상대오차를 검토한 결과 누가분포함수를 활용한 강우강도식이 더 높은 정확도를 가짐을 보였으며, 또한, 최근의 집중호우에 대한 영향을 살펴보기 위하여 2006년 까지의 강우자료를 이용하여 기존의 회귀식에 의한 방법과 누가분포함수를 활용한 경우의 결과값을 비교한 결과 이 경우에도 누가분포함수를 활용한 강우강도식의 정확도가 더 높음을 알 수 있었다. 결과적으로 본 연구에서 제안된 누가분포함수를 활용한 강우강도식은 기존의 회귀분석을 활용한 강우강도식보다 정확도면에서 우수하다고 할 수 있으며, 국내에 충분히 적용가능한 형태의 강우강도식이라고 판단된다.