• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.13 no.2
• /
• pp.1-8
• /
• 2017

Outdoor design temperature is important for selecting proper capacity of heating and cooling systems of a building to implement indoor thermal comfort and save energy consumption. The purpose of this study is to investigate the change of South Korea outdoor design temperature according to the assigned period. When outdoor design temperature of 8 locations calculated with the latest weather data during 2008~2015 years using ASHRAE Bin method are compared to the standard temperature of Ministry of Land, Infrastructure and Transport which is widely used for designing South Korea air-conditioning system at present, the maximum temperature difference becomes $0.97^{\circ}C$ for cooling, and $1.94^{\circ}C$ for heating. Due to wide outdoor temperature variation, update of outdoor design temperature based on recent weather data is recommended.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.405-414
• /
• 2021

This study predicted waxy corn harvest date in South Korea using 30-year (1991-2020) hindcasts (1-6 month lead) produced by the Pusan National University Coupled General Circulation Model (PNU CGCM)-Weather Research and Forecasting (WRF) chain. To estimate corn harvest date, the cumulative temperature is used, which accumulated the daily observed and predicted temperatures from the seeding date (5 April) to the reference temperature (1,650~2,200℃) for harvest. In terms of the mean air temperature, the hindcasts with a bias correction (20.2℃) tends to have a cold bias of about 0.1℃ for the 6 months (April to September) compared to the observation (20.3℃). The harvest date derived from bias-corrected hindcasts (DOY 187~210) well simulates one from observation (DOY 188~211), despite a slight margin of 1.1~1.3 days. The study shows the possibility of obtaining the gridded (5 km) daily temperature and corn harvest date information based on the cumulative temperature in advance for all regions of South Korea.

• 보존과학연구
• /
• s.24
• /
• pp.169-184
• /
• 2003

Yearly mean temperature and relative-humidity of the Seokguram Grotto was measured $19~23^{\circ}C$, 40~44% from May, 1998 to December,2002. The measurement has little differences comparing to the optimum guideline (temperature : $20^{\circ}\pm2^{\circ}C$, relative-humidity : $50^{\circ}\pm5%$). It is necessary to increase humidity in the Seokguram Grotto during winter because of heating and decrease the temperature during summer because of a higher temperature of outside. In addition, the diurnal range keep in $4^{\circ}C$ of temperature and in 10% of relative-humidity. Yearly mean concentration of $CO_2$(carbon dioxide) was measured538~658ppm that is higher than concentration of normal atmosphere(360 ppm). The $CO_2$ has an cumulative effect on the surface of stone cultural properties as a form of carbonic acid($H_2CO_3$) after reaction with water. HVAC (Heating, Ventilation and Air Conditioning) system should be operated to maintain ideal state for the preservation according to the optimum guideline. Also, the entrance into the Seokguram Grotto should be controlled to prevent a sudden fluctuation of humidity and temperature. Human could carry small particles like a microdust, microbe, etc., into the Seokguram Grotto and also could damage the surface by a direct touch.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.4
• /
• pp.340-347
• /
• 2015

This study was conducted to analyze the relationship between climate factors and fruit characteristics of 'Sangjudungsi' persimmon (Diospyros kaki THUNB) has been mainly cultivated in Sangju of Korea. We has been surveyed the yield and fruit characteristics such as fruit weight and soluble solids of 'Sangjudungsi' persimmon from 2010 to 2015 for five years. Also, as major meteorological factor, mean air temperature, cumulative temperature and days, the data of sunshine duration, diurnal range, and rainfall were collected from Sangju Regional Meteorological Administration. As result of that, the annual variation of fruit weight was affected by sunshine duration for April and October related starting point of fruit weight increase. The content of soluble solids was affected by sunshine duration for April and October similarly with fruit weight and was negatively correlated with the number of days with precipitation in the year. These results indicate the characteristics related to fruit quality like the above were affected by the sunshine duration and precipitation which is critical factor for the intensity of radiation during rapid growth period (April and October). Fruit number and yield per tree was commonly affected by mean air temperature of April and cumulative temperature days of October. These results also indicate that temperature for period of rapid growth stage of persimmon may have an important role in the fruit number and yield per tree.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.581-584
• /
• 2005

A district heating(DH) system supplies environmentally-friend heat and is appropriate for reduction of energy consumption and/or air pollutions. The objectives of this paper are to systematize data processing of transition temperature, investigate its effects on fatigue life of DH pipes and optimization for size of DH pipes. A relational database management system as well as reliable fatigue life evaluation procedures is established for Korean DH pipes. Also, since the prototypal evaluation results satisfied both cycle-based and stress-based fatigue criteria. Through the optimum design process, the cross section diminished 18.64% and the CUF diminished 23.35%. So, it can be used as useful information in the future for optimal design, operation and energy saving via setting of efficient condition and stabilization of water temperature.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.3
• /
• pp.307-313
• /
• 1984

The lapse rate of air temperature with respect to the elevation in the Taebaek Mountainous area was calculated and its application to recommendation for the safe cropping period in rice cultivation was attempted. The data for three sites of elevations at 300, 540 and 832-m above sea level were collected from the Regional Rural Guidance Office of Pyungchang Gun. The lapse rate ranged from $0.53^{\circ}C$ per 100-m elevation on January to $1.02^{\circ}C$ on March with average of $0.69^{\circ}C$. The estimated period of possible rice cropping decreased by the rate of 7 to 8 days per 100-m elevation. The rice variety requiring the cumulative temperature of $1800^{\circ}C$ such as Taeback-byo in Jinbu area could be cultivated below 300-m of altitude under the Taebaek Mountainous climatic condition. The variety requiring the cumulative temperature of $1400^{\circ}C$ such as Songjeon-byo could be adaptable up to the 500-m altitude for safe cultivation.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.420-432
• /
• 2011

Population dynamics of greenhouse whitefly, Trialeurodes vaporariorum (Westwood), were modeled and simulated to compare the temperature effects of air and tomato leaf inside greenhouse using DYMEX model simulator (pre-programed module based simulation program developed by CSIRO, Australia). The DYMEX model simulator consisted of temperature dependent development and oviposition modules. The normalized cumulative frequency distributions of the developmental period for immature and oviposition frequency rate and survival rate for adult of greenhouse whitefly were fitted to two-parameter Weibull function. Leaf temperature on reversed side of cherry tomato leafs (Lycopersicon esculentum cv. Koko) was monitored according to three tomato plant positions (top, > 1.6 m above the ground level; middle, 0.9 - 1.2 m; bottom, 0.3 - 0.5 m) using an infrared temperature gun. Air temperature was monitored at same three positions using a Hobo self-contained temperature logger. The leaf temperatures from three plant positions were described as a function of the air temperatures with 3-parameter exponential and sigmoidal models. Data sets of observed air temperature and predicted leaf temperatures were prepared, and incorporated into the DYMEX simulator to compare the effects of air and leaf temperature on population dynamics of greenhouse whitefly. The number of greenhouse whitefly immatures was counted by visual inspection in three tomato plant positions to verify the performance of DYMEX simulation in cherry tomato greenhouse where air and leaf temperatures were monitored. The egg stage of greenhouse whitefly was not counted due to its small size. A significant positive correlation between the observed and the predicted numbers of immature and adults were found when the leaf temperatures were incorporated into DYMEX simulation, but no significant correlation was observed with the air temperatures. This study demonstrated that the population dynamics of greenhouse whitefly was affected greatly by the leaf temperatures, rather than air temperatures, and thus the leaf surface temperature should be considered for management of greenhouse whitefly in cherry tomato grown in greenhouses.

• Journal of Ecology and Environment
• /
• v.31 no.3
• /
• pp.193-200
• /
• 2008

We obtained quantitative information on leaf unfolding and leaf shedding by observing 45 species of cool temperate deciduous trees in an arboretum over 5 growing seasons. These trees were in leaf (the foliage period) for 207 days on average after 1 April; 50% of leaves had been shed by 192 days after 1 April. Duration from the start of leaf unfolding to 50% leaf shedding was 157 days on average. Leaf unfolding began 35 days on average after 1 April. For leaf unfolding to begin, a$ 51^{\circ}C{\cdot}day$ of cumulated daily mean air temperature above $5^{\circ}C$ from 1 January (modified Kira's warmth index) was needed. Fifty-nine days elapsed between initiation and the final stage of leaf unfolding. The period of net photosynthetic assimilation was 157 days. The species with succeeding- type leaf unfolding associated with the anemochore seed type dominated the early stage of succession, while the species with flush-type leaf unfolding tended to dominate the late stage of succession. Few species were found in regions where late frosts occur after the day when the cumulative temperature for leaf unfolding is achieved. Biological characteristics include time of leaf unfolding, which affects the life history of each species, so that each species occupies its own niche in the stand. We conclude that that leaf phenology, such as timing of leaf unfolding and leaf shedding, is one of the components of each species' ecological characteristics.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.104-111
• /
• 1988

This paper deals with the micro-surface-cracks behavior on the unnotched smooth specimens of Type 304 stainless steel at $593^{\circ}C$ in air under creep and creep-fatigue conditions that have 10 mim and 1 min load holding times respectively. The behaviors of the micro-surface-cracks have been visualized by means of surface replica method and optical micro-photography. The quantitative characteristics of initiation, growth and coalescence of micro-surface-cracks have been investigated by observing and measuring the crack growth behaviors. some of the important results are as follows: Main crack initiates at grain boundary in the early stage(10 to 20%)of its life time and grows through coalescence and finally leads to fracture. The distribution of micro-surface-crack length, 2a, can be plotted against the composite Weibull distribution. The growth rate of the main crack can be plotted against the stress intensity factor, crack tip opering displacement and J integral.

• Korean journal of applied entomology
• /
• v.25 no.4 s.69
• /
• pp.221-228
• /
• 1986

An empirical model to predict initial disease occurrence and subsequent progress of Alternaria leaf spot was constructed based on the modified degree day temperature and frequency of rainfall in three years field experiments. Climatic factors were analized 10-day bases, beginning April 20 to the end of August, and were used as variables for model construction. Cumulative degree portion (CDP) that is over $10^{\circ}C$ in the daily average temperature was used as a parameter to determine the relationship between temperature and initial disease occurrence. Around one hundred and sixty of CDP was needed to initiate disease incidence. This value was considered as temperature threshhold. After reaching 160 CDP, time of initial occurrence was determined by frequency of rainfall. At least four times of rainfall were necessary to be accumulated for initial occurrence of the disease after passing temperature threshhold. Disease progress after initial incidence generally followed the pattern of frequency of rainfall accumulated in those periods. Apparent infection rate (r) in the general differential equation dx/dt=xr(1-x) for individual epidemics when x is disease proportion and t is time, was a linear function of accumulation rate of rainfall frequency (Rc) and was able to be directly estimated based on the equation r=1.06Rc-0.11($R^2=0.993$). Disease severity (x) after t time could be predicted using exponential equation $[x/(1-x)]=[x_0/(1-x)]e^{(b_0+b_1R_c)t}$ derived from the differential equation, when $x_0$ is initial disease, $b_0\;and\;b_1$ are constants. There was a significant linear relationship between disease progress and cumulative number of air-borne conidia of Alternaria mali. When the cumulative number of air-borne conidia was used as an independent variable to predict disease severity, accuracy of prediction was poor with $R^2=0.3328$.