• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.521-529
• /
• 2002

We have recently proposed the new concept of a phase-measuring volumetric interferometer that enables us to accurately measure the xyz-coordinates of the probe without metrology frames. The interferometer is composed of a movable target and a fixed photo-detector array. The target is made of point diffraction sources to emit two spherical wavefronts, whose interference is monitored by an array of photo-detectors. Phase shifting is applied to obtain the precise phase values of the photo-detectors. Then the measured phases are fitted to a geometric model of multilateration so as to determine the xyz-location of the target by minimizing least square errors. The proposed interferometer has been designed and built with a volumetric uncertainty of less than 1.0 $\mu\textrm{m}$ within a cubic working volume of side 120 mm. Here, in this paper, we also present error sources, an evaluated uncertainty, and test results from the prototype system. The self-calibration of two-dimensional precision metrology stages is applied to test the performance of the interferometer.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.413-416
• /
• 2008

A synthesis route to ordered mesoporous carbons with controllable nitrogen content has been developed for high-performance EDLC electrodes. Nitrogen-doped ordered mesoporous carbons (denoted as NMC) were prepared by carbonizing a mixture of two different carbon sources within the mesoporous silica designated by KIT-6. Furfuryl alcohol was used as a primary carbon precursor, and melamine as a nitrogen dopant. This synthesis procedure gave cubic Ia3d mesoporous carbons containing nitrogen as much as 13%. The carbon exhibited a narrow pore size distribution centered at 3-4 nm with large pore volume (0.6-1 cm3 g-1) and high specific BET surface area (700-1000 m2 g-1). Electrochemical behaviors of the NMC samples with various N-contents were investigated by a two-electrode measurement system at aqueous solutions. At low current density, the NMC exhibited markedly increasing capacitance due to the increase in the nitrogen content. This result could be attributed to the enhanced surface affinity between carbon electrode and electrolyte ions due to the hydrophilic nitrogen functional groups. At high current density conditions, the NMC samples exhibited decreasing specific capacitance against the increase in the nitrogen content. The loss of the capacitance with the N-content may be explained by high electric resistance which causes a significant IR drop at high current densities. The present results indicate that the optimal nitrogen content is required for achieving high power and high energy density simultaneously.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.19-19
• /
• 2003

A cubic perovskite-type CaCu₃Ti₄O/sub 12/ compound has recently drawn a great attention because of an extraordinary high permittivity (～10⁴ at 1 kHz) at room temperature and its near temperature-independence over a wide temperature region, and thus numerous literature have been reported on CCTO polycrytalline ceramics and thin films. However, only a few literature have been reported on the CCTO single due to the lack of information about the CCTO primary phase field. On the basis of our recent experimental determination of the CCTO primary phase field, we could grow ACu₃Ti₄O/sub 12/(A=Ca, Sr) single crystals using both top-seeded solution growth and flux growth methods. This presentation will include three major parts. In part I, the thermal decomposition reaction of CCTO and its primary phase field in the CaO-CuO-TiO₂ ternary system will be presented. Detailed growth conditions of ACu₃Ti₄O/sub 12/(A=Ca, Sr) single crystals and characteristics of as-grown crystals will be followed in Part II. Part III will be comprised of dielectric properties of as-grown ACu₃Ti₄O/sub 12/(A=Ca, Sr) single crystals. Our experimental results will be compared with those of previous reports for discussion.

• Korean Journal of Materials Research
• /
• v.23 no.2
• /
• pp.104-111
• /
• 2013

In this study, GaN powders were synthesized from gallium oxide-hydroxide (GaOOH) through an ammonification process in an $NH_3$ flow with the variation of $B_2O_3$ additives within a temperature range of $300-1050^{\circ}C$. The additive effect of $B_2O_3$ on the hexagonal phase GaN powder synthesis route was examined by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transformation infrared transmission (FTIR) spectroscopy. With increasing the mol% of $B_2O_3$ additive in the GaOOH precursor powder, the transition temperature and the activation energy for GaN powder formation increased while the GaN synthesis limit-time ($t_c$) shortened. The XPS results showed that Boron compounds of $B_2O_3$ and BN coexisted in the synthesized GaN powders. From the FTIR spectra, we were able to confirm that the GaN powder consisted of an amorphous or cubic phase $B_2O_3$ due to bond formation between B and O and the amorphous phase BN due to B-N bonds. The GaN powder synthesized from GaOOH and $B_2O_3$ mixed powder by an ammonification route through ${\beta}-Ga_2O_3$ intermediate state. During the ammonification process, boron compounds of $B_2O_3$ and BN coated ${\beta}-Ga_2O_3$ and GaN particles limited further nitridation processes.

• Molecules and Cells
• /
• v.39 no.3
• /
• pp.195-203
• /
• 2016

Copper is an essential element required for a variety of functions exerted by cuproproteins. An alteration of the copper level is associated with multiple pathological conditions including chronic ischemia, atherosclerosis and cancers. Therefore, copper homeostasis, maintained by a combination of two copper ions ($Cu^+$ and $Cu^{2+}$), is critical for health. However, less is known about which of the two copper ions is more toxic or functional in endothelial cells. Cubic-shaped $Cu_2O$ and CuO crystals were prepared to test the role of the two different ions, $Cu^+$ and $Cu^{2+}$, respectively. The $Cu_2O$ crystal was found to have an effect on cell death in endothelial cells whereas CuO had no effect. The $Cu_2O$ crystals appeared to induce p62 degradation, LC3 processing and an elevation of LC3 puncta, important processes for autophagy, but had no effect on apoptosis and necrosis. $Cu_2O$ crystals promote endothelial cell death via autophagy, elevate the level of reactive oxygen species such as superoxide and nitric oxide, and subsequently activate AMP-activated protein kinase (AMPK) through superoxide rather than nitric oxide. Consistently, the AMPK inhibitor Compound C was found to inhibit $Cu_2O$-induced AMPK activation, p62 degradation, and LC3 processing. This study provides insight on the pathophysiologic function of $Cu^+$ ions in the vascular system, where $Cu^+$ induces autophagy while $Cu^{2+}$ has no detected effect.

• Journal of the Mineralogical Society of Korea
• /
• v.11 no.2
• /
• pp.117-125
• /
• 1998

Crystallization behavior of platinum minerals within Pt-Sb-Bi bearing ore magmas and mineralogical properties of the existing minerals were investigated at 1,00$0^{\circ}C$ by synthetic experiment. High purity reagents were used as starting materials and silica tubings as containers. Reaction products were analysed by reflecting microscopy, X-ray diffraction, electron probe microanalysis, and micro-hardness test. Stable minerals at 1,00$0^{\circ}C$ are platinum, electron probe microanalysis, and micro-hardness test. Stable minerals at $1,000^{\circ}C$ are platinum, stump-flite (PtSb) and geversite (PtSb2). They are in equilibrium with liquid (ore magma). Platinum contains considerable amount of Sb of 7.5 at.%, whereas Bi only up to 0.9 at.%. Pure stumpflite is hexagonal with space group P63/mmc, and unit cell parameters are a=4.1318(6), c=5.483(1)$\AA$. VHN50=417(2)$\AA$. Geversite has cubic structure with space group Pa3. Cell parameters are a=6.4373(2)$\AA$ and Vicker hardness values VHN50=663.5 (566~766). Both stumpflite and geversite show solid solution and their end-members are Pt48.8Sb40.7-Bi10.5, and Pt33.7-Sb59.8Bi6.5, respectively. Although stumpflite (m.p. $1,043^{\circ}C$) and unnamed PtBi (m.p. 7$65^{\circ}C$) do not form a complete solid solution at $1,000^{\circ}C$, they are known, at $600^{\circ}C$, to form a continuous solid solution. Geversit (m.p. $1,226^{\circ}C$) also forms complete solid solution with insizwaite (m.p. $660^{\circ}C$). Unit cell dimensions of the minerals above increases with the amount of Bi substituting for Sb.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.8
• /
• pp.1367-1375
• /
• 2018

Silver nanoparticles have been widely applied for biomedical areas owing to their potent antiviral and antibacterial activities. Synthesis of silver nanoparticles using biomacromolecules is more efficient, environment-friendly, and cost-saving compared with the traditional approach. In this paper, a novel approach was developed to establish a reaction system with $Ag^+-BH4^--sericin$ to synthesize silver nanoparticles conjugated to sericin (AgNPs-Sericin). Sericin could be as a good dispersant and stabilizing agent, which is able to modify nanoscaled AgNPs, the average diameter of which was only $3.78{\pm}1.14nm$ prepared in a 0.3 mg/ml sericin solution. The characterizations of the AgNPs-Sericin were determined by FTIR, thermogravimetry, and XRD analyses. The results showed that the synthesized AgNPs conjugated with sericin as organic phase. Via SAED and XRD analysis, we showed that these AgNPs formed polycrystalline powder with a face-centered cubic structure of bulk metals. Moreover, we investigated the antiviral and antibacterial activities of AgNPs-Sericin, and the results showed that AgNPs-Sericin exhibited potent anti-HIV-1 activity against CCR5-tropic and CXCR4-tropic strains, but no significant cytotoxicity was found toward human genital epithelial cells compared with free silver ions, which are accepted as a commonly used potent antimicrobial agent. Moreover, its antibacterial activity was determined via flow cytometry. The results showed that AgNPs-Sericin could suppress gram-negative (E. coli) and gram-positive (S. aureus) bacteria, but more was potent for the gram-negative one. We concluded that our AgNPs-Sericin could be a potential candidate as a microbicide or antimicrobial agent to prevent sexually transmitted infections.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.39.4-40
• /
• 2016

We aim to investigate formation of satellite sub-galactic structures around isolated dwarf galaxies using cosmological hydrodynamic zoom simulations. For this, we modify a cosmological hydrodynamic code, GADGET-3, in a way that includes gas cooling down to T~10K, gas heating by universal reionization when z < 8.9, UV shielding for high density regions of $n_{shield}$ > $0.014cm^{-3}$, star formation in the dense regions ($n_H$ > $100cm^{-3}$), and supernova feedback. To get good statistics, we perform three different simulations for different target galaxies of the same mass of ${\sim}10^{10}M_{sun}$. Each simulation starts in a cubic box of a side length of 1Mpc/h with 17 million particles from z = 49. The mass of dark matter (DM) and gas particle is $M_{DM}=4.1{\times}10^3M_{sun}$ and $M_{gas}=7.9{\times}10^2M_{sun}$, respectively, thus each satellite sub-galactic structure can be resolved with more than hundreds or thousands particles. We analyze total 90 sub-galactic structures that have formed outside of the main halos but infall the main halos. We found that 1) mini halos that interact more with the other mini halos tend to accrete the more mass, 2) mini halos that interact more before the reionization tend to form more stars, 3) mini halos with the more interaction tend to approach closer to the galactic center and have the lower orbital circularity, 4) survivals even in the strong tidal fields evolve baryon dominated system, such as globular clusters.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.177-183
• /
• 2010

We report on the deposition of ZnO films using a metal organic chemical vapor deposition (MOCVD) as a function of pushing pressure and kind of reactant such as oxygen gas and water A diethylzinc (DEZ) is supplied and controlled by Ar pushing pressure through bubbling system. Oxygen gas and water are used as reactant in order to form oxidation. We knew that the surface roughness is related in the process conditions such as reactant kind and DEZ flow rate. A substrate temperature has little role of surface roughness with $O_2$ reactant. However, $H_2O$ reactant makes it to increase over the 20 times. We could get the maximum roughness of 39.16 nm at the 90 sccm of DEZ Ar flow rate, the 8 Pa of $H_2O$ vapor pressure, and the $140^{\circ}C$ of substrate temperature. In this paper, we investigated the ZnO films for the application to the light absorption layer of solar cell layer.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.3
• /
• pp.145-156
• /
• 2000

In this paper, we propose a new methodology which includes the optimal design procedure of Polynomial Neural Networks(PNN) structure for model identification of complex and nonlinear system. The proposed PNN algorithm is based on GMDA(Group Method of Data handling) method and its structure is similar to Neural Networks. But the structure of PNN is not fixed like in conventional Neural Networks and can be generated. The each node of PNN structure uses several types of high-order polynomial such as linear, quadratic and cubic, and is connected as various kinds of multi-variable inputs. In other words, the PNN uses high-order polynomial as extended type besides quadratic polynomial used in GMDH, and the number of input of its node in each layer depends on that of variables used in the polynomial. The design procedure to obtain an optimal model structure utilizing PNN algorithm is shown in each stage. The study is illustrated with the aid of pH neutralization process data besides representative time series data for gas furnace process used widely for performance comparison, and shows that the proposed PNN algorithm can produce the model with higher accuracy than previous other works. And performance index related to approximation and prediction capabilities of model is evaluated and also discussed.