• Textile Coloration and Finishing
• /
• v.13 no.5
• /
• pp.289-297
• /
• 2001

As the basic study to investigate the mechanism of improvement in the dyeing fastness of natural dyes on silk fabrics the optical behavior of tannin solution, the optimal condition of tannin treatment and the changes of the physical structure of silk fabrics were studied in the treatment of tannin. Results obtained were as follows ; 1 The K/S values of tannin-treated silk fabrics were not changed by tannin content on silk fabrics but yellowing of tannin in treatment condition. 2. As the concentration of tannin was increased in its treating condition, the tannin content and K/S vague of tannin-treated silk fabrics were increased. 3. Because tannin gave rise to yellowing by hydrolysis and oxidation at high temperature, the higher tannin-treating temperature was, the lower the tannin content and K/S values of silk fabrics 4. The tannin content of silk fabric was higher in acidic treating condition and the highest K/S value was showed at pH 5. 5. As the tannin content of silk fabric was increased, the value of $\xi$ -potential of it became negative. 6. As the tannin content of silk fabric was increased, the crystallinity and crystallite size of it were decreased. This meant that the fraction of amorphous region in the fibers increased. And the degree of orientation of it was decreased with the tannin treatment.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.46 no.1
• /
• pp.9-15
• /
• 2023

Recently, a silkworm strain (tentatively named Sericinjam) producing 100% sericin cocoons has been studied in South Korea. In this preliminary study, the crystallinity, mechanical properties, and dissolution conditions of sericin from Sericinjam cocoons were examined. The Sericinjam cocoon could be dissolved in water at high temperature (120℃) and high pressure (HTHP method) in an autoclave and in a CaCl₂/H₂O/EtOH mixture (ternary solvent method), resulting in 82% and 97% dissolution after 30 min, respectively. The solution viscosity of the silk sericin formic acid (SSFA) solution obtained from sericin extracted using the ternary solvent method was higher than that obtained using the HTHP method; however, SSFA solutions obtained from sericin extracted from conventional Baekokjam cocoons yielded a higher solution viscosity. The crystallinity and breaking strength of the sericin film from Sericinjam cocoons were slightly lower, respectively, than those from Baekokjam cocoons. In contrast, the elongation at break of the Sericinjam sericin film obtained using the HTHP method was higher than that of the Baekokjam sericin film.

• Journal of Sericultural and Entomological Science
• /
• v.40 no.2
• /
• pp.150-157
• /
• 1998

This study was carried out to define the effects of anti-juvenile hormone analogue(AJH) treatment at different silkworm larval stages on some silk filament properties. It was revealed that the treatments at the 1st and 2nd days of the 3rd instar as well as the 1st day of the 4th instar resulted to trimolters induction without lethal effect. The trimolters induced by treatment at the 1st day of the 4th instar showed the shortest larval duration and the lowest single cocoon weight, cocoon shell ratio, cocoon size, single filament length and denier of filament compared with those of the control, while the trimolters induced by the 3rd-instar treatment showed intermediate values. All treatments showed no significant differences from the aspect fo degumming ratio, elongation rate and crystallinity index of fibroin. However the silk filament obtained from the treatment at the 1st day of the 4th instar showed the highest tenacity which was revealed to be related to the better uniformity of filament by the means of microscopic photographing. FT-IR spectroscopy of the silk fibroin showed a sharp and strong peak at the position of 794.72 cm-1 in all AJH-treated samples regardless of trimolters induction, which was absent in control.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.44 no.1
• /
• pp.4-11
• /
• 2022

In this study, cocoons from different silkworm strains and rearing seasons were collected and immersed in water at elevated temperatures to investigate the effect of a wet treatment on their morphology and crystallinity. Untreated cocoons exhibited different crystallinities depending on the silkworm strain and rearing season; however, no distinct changes in their morphological structure were observed. Furthermore, after wet treatment, the differences in the crystallinities of cocoons disappeared. In addition, wet treatment of degummed silk (i.e., fibroin) did not change its crystallinity. These results indicate that different crystallinities of the untreated cocoons collected from various silkworm strains and rearing seasons are due to the different characteristics of sericin in the cocoons.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.33 no.2
• /
• pp.138-143
• /
• 2016

In the present study, silk fibroin (SF) was dissolved in $CaCl_2/H_2O/EtOH$ solution at $85^{\circ}C$. After the dissolution, the SF solution was cooled down and stored at $4^{\circ}C$ for 28 d. The stability of the solution's viscosity and electrospinnability was observed to examine the stability of SF molecules during storage in $CaCl_2/H_2O/EtOH$ solution. The viscosities of $SF/CaCl_2/H_2O/EtOH$ solution and SF formic acid solution did not change during 28 days' storage of SF in $CaCl_2/H_2O/EtOH$ solution. The electrospinnability of the SF solution, mean diameter of the electrospun SF fiber, and crystallinity index of electrospun SF web did not change, regardless of the length of the storage period. These results imply that SF molecules do not degrade during 28 days' storage in $CaCl_2/H_2O/EtOH$ solution.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.1
• /
• pp.41-47
• /
• 1999

Silk fibroin dissolved in highly concentrated calcium chloride and ethanol mixture aqueous solution turned into gel under suitable conditions. Preparation conditions and properties of gel were investigated as a function of parameters such as pH of solution, fibroin concentration, glycerol concentration and molecular weight. When pH of silk fibroin aqueous solution was near the isoelectronic point(pH 3.9~4.0), gelation occurred rapidly and strength of gel was stonger than that of pH-unadjusted due to electrostatic repulsion decrease between silk fibroin macromolecules. As concentration of silk fibroin and glycerol was higher, gelation occurred more rapid. FT Infra-red spectra of freeze-dried fibroin gel showed that gelation was derived by intermolecular anti-parallel ${\beta}$-sheet structure formation. In addition to, it was found that white-precipitate occurred instead of gelation when aqueous silk fibroin was treated by enzyme(flavouzyme), however, after flavouzyme-treated silk fibroin aqueous solution was centrifugated gelation occurred instantly. The results of differential scanning thermal analysis and infra-red spectroscopy showed that thermal stability and crystallinity of enzyme-hydrolyzed fibroin are superior to those of unhydrolyzed fibroin.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.47 no.1
• /
• pp.63-71
• /
• 2023

In this study, the structural characteristics of sericin recovered from wastewater released from the silk textile industry (Plant sericin) were comparatively analyzed with those of sericin extracted from a silkworm cocoon produced in a laboratory (Lab sericin). To prepare Plant sericin, ethanol was added to wastewater (i.e., a sericin aqueous solution) after the degumming process to remove nonprotein materials, affording a sericin precipitate. To prepare Lab sericin, nonprotein materials were removed from a silkworm cocoon and sericin was subsequently extracted from the cocoon. Lab sericin and Plant sericin exhibited similar solution viscosities, gel strengths, and crystallinity indices, indicative of the similar molecular weights (MWs) of the two sericin samples. In the case of sericin powder, Plant sericin was more crystalline than Lab sericin due to its treatment with ethanol. The findings of this study revealed that sericin recovered from industrial wastewater can be used equally as its MW is similar to that of sericin obtained through laboratory-scale extraction.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.408-412
• /
• 2005

Structure and characteristic of the films blended chitosan matrix with silk fibroin, extracted from Bombyx mori, were studied by X-ray diffraction, differential scanning calorimetry, FT-IR spectra analysis, SEM photographs, contact angle measurement and water absorbency in order to use as biomaterials. The blend films of $0\~30 wt\%$ fibroin content were prepared in acetic solution with $Li^+$ ion. It was found that the crystallinity of chitosan/fibroin blend films was decreased by the presence of intermolecular interactions such as hydrogen bonding between animo groups of chitosan and carbonyl groups of fibroin. As the proportion of fibroin in the blend increased, anhydrous crystalline phase of chitosan disappeared, and hydrated crystalline phase decreased, and $\beta$-structure crystalline phase of fibroin was formed. Therefore the blend films were crystallized into two different crystalline region of chitosan and fibroin. Surface hydrophilicity and water absorbency increased with blending fibroin. Above 20 $wt\%$ fibroin content, hydrogel film was formed. The surface and section of the film showed uniform microstructure on SEM photographs.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.2
• /
• pp.138-146
• /
• 1994

The structural characteristics of Antheraea yamamai and Antheraea pernyi silk were investigated by using x-ray diffraction method, IR spectroscopy and polarizing microscopy. The amino acid composition, fiber density, thermal decomposition temperature and glass transition temperature were also measured for relating these physical properties to the structure in comparison with those of Bombyx mori silk fiber. There was no significant structural difference between A. yamamai and A. pernyi silk fiber on an examination of x-ray diffraction curve and IR spectrum. Both of these wild silk fibers showed double diffraction peaks at the Bragg angle 2Θ16.7˚ and 20.5˚by x-ray diffraction analysis as well as IR absorption peaks for the bending vibration of specific groups related to ala-ala amino acid sequence. On the other hand, the x-ray diffraction curve and IR spectrum of Bombyx mori silk fiber are different from those of wild silk fibers, indicating different crystal structure as well as amino acid sequences. It showed under the polarizing microscope examination that the birefringence and optical orientation factor of wild silk fibers are much lower than those of B. mori silk. Also, the surface of degummed wild silk fibers was characterized by the longitudinal stripes of microfibrils in the direction of fiber axies. The amino acid composition, which is strongly related to the fine structure and properties, was not significantly different between these two wild silk fibers. However, the alanine content was somewhat less and polar amino acid content more for A. yamamai. As a result of fiber density measurement, the specific gravities of B. mori, A. pernyi and A. yamamai were 1.355~1.356, 1.308~1.311, 1.265~1.301g/㎤ in the order, respectively. The calculated crystallinity(%) was 64% for B. mori and 51~52% for wild silk fibers, which showed same trend by IR method in spite of somewhat higher value. The thermal decomposition behaviour was examined by DSC and TGA, showing that the degradation temperature was in the order of B mori, A. prernyi and A. yamamai at around 350$^{\circ}C$. It was also observed by TGA that the decomposition seems to proceed step by step according to their specific regions in the fiber structure, resulting the difference in their thermal stabilities. The glass transition temperature was turned out to be 220$^{\circ}C$ for B. mori, 240$^{\circ}C$ A. yamamai and 255$^{\circ}C$ A. pernyi by the dynamic mechanical analysis. It is expected that the chemical properties are affected by the dynamic mechanical behavior in accordance with their structural characters.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.1
• /
• pp.129-136
• /
• 1993

Authors have studied the adsorption of anionic surfactant from detergent solutions on cotton fabric during washing process and have measured the concentration of the residual surfactant in rinsing solution. The relations with temperature and pre-soaking time to rinsing process have been studied. The adsorption of sodium dodecylbenzene sulfonate by various textile fibers has also been investigated. The results of this study are; 1. Three times rinsing is sufficient as, without pre-soaking, the concentration of the surfactant on fabric is stable from that time on. 2. The rinsing efficiency increases with temperature; at $25^{\circ}C$, $40^{\circ}C$, and $55^{\circ}C$, the concentrations of surfactant on the fabric after-rinsing are 68, 59, 51 mg/100 g of fiber respectively. 3. The longer the pre-soaking time, the lower the rinsing efficiency is; the 4hrs presoaked fabric shows increased surfactant concentration than the one without-soaking. And the increment is 35.8%. 4. The adsorption of sodium dodecylbenzene sulfonate on fabrics differs greatly with the chemical nature of the fiber; wool, silk and nylon which are thought to be ionic-adsorbants shows greater adsorption. 5. The adsorption of surfactant is more affected by the ionic character than the physical one, and the one with higher crystallinity such as cotton and polyester shows lower value than rayon or acetate.