• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.442-444
• /
• 1998

We made the beam crosssectional monitor system which was possible to display the ion beam crosssection extracted from accelerator on personal computer monitor. Previous beam profile monitor system could detect the central beam position with limited low beam current, but this developed beam crosssectional monitor system could operate at the relatively higher beam current. In addition we realized the real time data taking system by adopting the VXI system for beam size, central position and crosssection.

• Steel and Composite Structures
• /
• v.8 no.1
• /
• pp.19-34
• /
• 2008

This paper presents the results of a validation and parametric study for the theory presented in the companion paper. The parameters investigated include the stiffness of axial and rotational restraints, load ratio, depth-span ratio of the beam, the yield strength of steel, load type and the temperature distribution in the crosssection of the beam.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.149-152
• /
• 1996

In this paper, the authors propose a new method for linearizing a nonlinear dynamical system by use of Volterra kernel of the nonlinear system. The authors have recently obtained a new method for measuring Volterra kernels of nonlinear control systems by use of a pseudo-random M-sequence and correlation technique. In this method, an M-sequence is applied to the nonlinear system and the crosscorrelation function between the input and the output gives us every crosssection of Volterra kernels up to 3rd order. Once we can get Volterra kernels of nonlinear system, we can construct a linearization method of the nonlinear system. Simulation results show good agreement between the observed results and the theoretical considerations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.161-164
• /
• 1996

The authors have recently proposed a new method for identifying Volterra kernels of nonlinear control systems by use of M-sequence and correlation technique. A specially chosen M-sequence is added to the nonlinear system to be identified, and the crosscorrelation function between the input and output is calculated. Then every crosssection of Volterra kernels up to 3rd order appears at a specified delay time point in the crosscorrelation. This method is applied to a saturation-type nonlinear feedback control system of mechanical-electrical servo system having torque saturation nonlinearity. Simulation experiments show that we can obtain Volterra kernels of saturation-type nonlinear system, and a good agreement is observed between the observed output and the calculated one from the measured Volterra kernels.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.2
• /
• pp.430-441
• /
• 1997

Journal of the Korean Society of Clothing and Textiles Vol. 21, No. 2 (1997) p. 430∼441 Clothing fitness is strongly required in the apparel industry, and draping is an effective tool to increase fitness to the wearers. A more sophisticated and systematic information of the somatotype, accordingly, is necessary for better dress form design. This study was performed to provide fundamental data on middle-aged women's somatotypes for dress form designers by classifying the torso somatotype and analyzing the characteristics of their somatotype. The subjects were directly measured anthropometrically and indirectly analyzed photo- graphically. Data were analyzed by factor analysis, cluster analysis and analysis of variance. On the basis of the cluster analysis, using 7 factors cores the subjects were classified into four groups and four dress forms for middle-aged women were constructed. 8y the analysis of moire topography of proposed dress forms that were constructed according to the characteristics and silhouettes of front and lateral views for each somatotype of subjects, three-dimensional characteristics of somatotype and overlapped crosssection diagrams were analyzed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.2
• /
• pp.56-66
• /
• 1994

Numerical methods are developed to obtain the buckling loads and to analyze the postbuckling behavior of the tapered steel piles. The nondimensional differential equations governing the elastica of the buckled piles are derived by the third order theory and solved numerically. The Runge-Kutta method is used to solve the differential equations, and the bisection method is used to obtain the buckling loads and the reaction moments of the clamped ends. Both the linear and stepped taper of the steel piles are considered as the variable crosssection in the differential equations. As the numerical results, the equilibrium paths, the buckling loads vs. section ratio curves and the typical elastica and the bending moment diagrams of the buckled piles are presented in figures. Experimental studies that complement the theoretical results are presented. It is expected that the numerical methods developed in this study for calculating the buckling loads and analyzing the postbuckling behavior of the steel piles are used in the structural and foundation engineering.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.1
• /
• pp.1-4
• /
• 2004

MoS$_2$-Ti films were deposited on SKD-11 tool steel substrate by a D.C. magnetron sputtering system. The influence of deposition parameters on the adhesion of the films was investigated by the scratch test. Crosssection morphology was evaluated using FE-SEM. The plasma etching played an important role on the adhesion of the films. The appropriate etching conditions roughened the surface, resulting In the improved adhesion of the film. The adhesion of the film increased with the interlayer thickness up to 110 nm and then decreased slightly with further increasing of interlayer thickness. The adhesion was highest at a bias voltage of -50 V. Further increase of the bias voltage decreased the film adhesion.

• Journal of the Mineralogical Society of Korea
• /
• v.4 no.1
• /
• pp.51-55
• /
• 1991

Transmission electron microscopic study including single particle electron diffraction and morphological observation using replica and thin section was carried out for the Sancheong halloysite. Halloysite tube generally consists of inner circular and outer polygonal leaves. Primary triangular or concave voids are found between inner and outer leaves. Crosssection of halloysite tubes whose diameters are smaller than 500${\AA}$ are generally circular, whereas those larger than 500${\AA}$ are polygonal. Electron diffraction pattern of thick polygonal halloysite tube shows that it has a 2-layer monoclinic structure as suggested by previous workers.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.13 no.5
• /
• pp.17-23
• /
• 1976

The buildup of fission product, i.e. Xe-135 poisoning, is a prime factor in restarting a nuclear reactor from the shutdown, which was under normal operation in the high flux thermal reactor, It is caused by the high absorption crosssection of Xe-135 to thermal neutrons and its long half life, from which the thermal power is affected. It is then possible to restart a nuclear reactor after the sufficient excess reactivity to override this poisoning must be inserted, or its concentration is decreased sufficiently when its temporary shutdown is required. As ratter of fact, these have an important influence not only on reactor safety but also on economic aspect in operation. Considering these points in this study, the shutdown process was cptimized using the Pontryagin's maximum principle so that the shutdown mirth[d was improved as to restart the reactor to its fulpower at any time, but the xenon concentration did not excess the constrained allowable value during and after shutdown, at the same time all the control actions were completed within minimum time from beginning of the shutdown.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.56-62
• /
• 2011

Zirconium is used in nuclear reactors as a structural material due to its excellent corrosion resistance and to low neutron crosssection. Variation in the distribution and solubility of Zr(IV) with solution pH was obtained. Distribution of Zr(IV) containing species in HCl and $HNO_3$ solution was analyzed by considering the complex formation of Zr(IV) species with the anion of the inorganic acid. Bromley interaction parameter between $ZrO^{2+}$ and nitrate ion was estimated by using the reported data on the solvent extraction of Zr(IV) by Cyanex272 from $HNO_3$ solution. This Bromley parameter can be utilized in calculating extraction isotherm of Zr(IV) and in predicting the separation factor between Zr(IV) and Hf(IV).