• Title/Summary/Keyword: cross-product ratio

Search Result 65, Processing Time 0.027 seconds

Assessment and merging technique for GPM satellite precipitation product using ground based measurement (GPM 위성 강우자료의 검증과 지상관측 자료를 통한 강우 보정 기법)

  • Baik, Jongjin;Park, Jongmin;Kim, Kiyoung;Choi, Minha
    • Journal of Korea Water Resources Association
    • /
    • v.51 no.2
    • /
    • pp.131-140
    • /
    • 2018
  • Precipitation is a key variable to enhance the understanding of water cycle system and secure and manage the water resources efficiently. In this study, we evaluated the feasibility of GPM precipitation datasets through comparison with the 92 ASOS sites in South Korea during 2015. Additionally, three merging techniques (i.e., Geographical Differential Analysis, Geographical Ratio Analysis, Conditional Merging) were applied to improve accuracy of precipitation by fusing the advantages from point and satellite-based datasets. The results of this study are as follows. 1) GPM dataset indicated slightly overestimation with compared ASOS dataset, especially high uncertainties in summer season. 2) Validation of three merging techniques through jackniffe cross-validation showed that uncertainty were decreased as the spatial resolution increased. Especially, conditional merging showed the best performance among three methods.

Study on optimum structure of air-lift bio-reactor using numerical analysis of two-phase flow (이상 유동 수치해석을 이용한 기포 구동 생물 반응기 내부 최적 구조에 관한 연구)

  • Kim, San;Chung, Ji Hong;Lee, Jae Won;Sohn, Dong Kee;Ko, Han Seo
    • Journal of the Korean Society of Visualization
    • /
    • v.17 no.3
    • /
    • pp.24-31
    • /
    • 2019
  • Recently, an air-lift bio-reactor operated by micro bubbles has been utilized to product hydrogen fuel. To enhance the performance, characteristics of hydrodynamics inside the bio-reactor were analyzed using a numerical simulation for two-phase flow. An Eulerian model was employed for both of liquid and gas phases. The standard k-ε model was used for turbulence induced by micro bubbles. A Population Balance Model was employed to consider size distribution of bubbles. A hollow cylinder was introduced at the center of the reactor to reduce a dead area which disturbs circulation of CO bubbles. An appropriate diameter of the draft tube and hollow cylinder were optimized for better performance of the bio-reactor. The optimum model could be obtained when the cross-sectional area ratio of the hollow cylinder to the reactor, and the width ratio of the riser to the downcomer approached 0.4 and 3.5, respectively. Consequently, it is expected that the optimum model could enhance the performance of the bio-reactor with the homogeneous distribution and higher density of CO, and more effective mixing.

Teaching Proportional Reasoning in Elementary School Mathematics (초등학교에서 비례 추론 지도에 관한 논의)

  • Chong, Yeong Ok
    • Journal of Educational Research in Mathematics
    • /
    • v.25 no.1
    • /
    • pp.21-58
    • /
    • 2015
  • The aim of this study is to look into the didactical background for teaching proportional reasoning in elementary school mathematics and offer suggestions to improve teaching proportional reasoning in the future. In order to attain these purposes, this study extracted and examined key ideas with respect to the didactical background on teaching proportional reasoning through a theoretical consideration regarding various studies on proportional reasoning. Based on such examination, this study compared and analyzed textbooks used in the United States, the United Kingdom, and South Korea. In the light of such theoretical consideration and analytical results, this study provided suggestions for improving teaching proportional reasoning in elementary schools in Korea as follows: giving much weight on proportional reasoning, emphasizing multiplicative comparison and discerning between additive comparison and multiplicative comparison, underlining the ratio concept as an equivalent relation, balancing between comparisons tasks and missing value tasks inclusive of quantitative and qualitative, algebraic and geometrical aspects, emphasizing informal strategies of students before teaching cross-product method, and utilizing informal and pre-formal models actively.

Study on Proportional Reasoning in Elementary School Mathematics (초등학교 수학 교과에서의 비례 추론에 대한 연구)

  • Jeong, Eun Sil
    • Journal of Educational Research in Mathematics
    • /
    • v.23 no.4
    • /
    • pp.505-516
    • /
    • 2013
  • The purpose of this paper is to analyse the essence of proportional reasoning and to analyse the contents of the textbooks according to the mathematics curriculum revised in 2007, and to seek the direction for developing the proportional reasoning in the elementary school mathematics focused the task variables. As a result of analysis, it is found out that proportional reasoning is one form of qualitative and quantitative reasoning which is related to ratio, rate, proportion and involves a sense of covariation, multiple comparison. Mathematics textbooks according to the mathematics curriculum revised in 2007 are mainly examined by the characteristics of the proportional reasoning. It is found out that some tasks related the proportional reasoning were decreased and deleted and were numerically and algorithmically approached. It should be recognized that mechanical methods, such as the cross-product algorithm, for solving proportions do not develop proportional reasoning and should be required to provide tasks in a wide range of context including visual models.

  • PDF

ESTIMATION OF THE FISSION PRODUCTS, ACTINIDES AND TRITIUM OF HTR-10

  • Jeong, Hye-Dong;Chang, Soon-Heung
    • Nuclear Engineering and Technology
    • /
    • v.41 no.5
    • /
    • pp.729-738
    • /
    • 2009
  • Given the evolution of High-Temperature Gas-cooled Reactor(HTGR) designs, the source terms for licensing must be developed. There are three potential source terms: fission products, actinides in the fuel and tritium in the coolant. It is necessary to provide first an inventory of the source terms under normal operations. An analysis of source terms has yet to be performed for HTGRs. The previous code, which can estimate the inventory of the source terms for LWRs, cannot be used for HTGRs because the general data of a typical neutron cross-section and flux has not been developed. Thus, this paper uses a combination of the MCNP, ORIGEN, and MONTETEBURNS codes for an estimation of the source terms. A method in which the HTR-10 core is constructed using the unit lattice of a body-centered cubic is developed for core modeling. Based on this modeling method by MCNP, the generation of fission products, actinides and tritium with an increase in the burnup ratio is simulated. The model developed by MCNP appears feasible through a comparison with models developed in previous studies. Continuous fuel management is divided into five periods for the feeding and discharging of fuel pebbles. This discrete fuel management scheme is employed using the MONTEBURNS code. Finally, the work is investigated for 22 isotope fission products of nuclides, 22 actinides in the core, and tritium in the coolant. The activities are mainly distributed within the range of $10^{15}{\sim}10^{17}$ Bq in the equilibrium core of HTR-10. The results appear to be highly probable, and they would be informative when the spent fuel of HTGRs is taken into account. The tritium inventory in the primary coolant is also taken into account without a helium purification system. This article can lay a foundation for future work on analyses of source terms as a platform for safety assessment in HTGRs.

Effect of Solvent on the Grafting Polymerization of Polyethylene Wax with Maleic anhydride (폴리에틸렌 왁스와 무수 말레인산의 그라프팅 중합 반응에서 용매가 미치는 영향)

  • Yu, Si-Won;Choi, Joong-So;Na, Jae-Sik
    • Resources Recycling
    • /
    • v.23 no.1
    • /
    • pp.48-57
    • /
    • 2014
  • In this study, we have investigated the influence of the nature of solvent on the grafting reaction of maleic anhydride onto polyethylene wax obtained as a by-product in a high density polyethylene plant. The results show that the grafting ratio in xylene as a solvent was higher than toluene. This is because xylene has excellent monomer solubility, swelling property and miscibility. It has been also observed that grafting degree shows an initial jump in percentage of grafting with increasing amount of solvent, from 0% v/w to 200% v/w giving maximum grafting in 200% v/w and then slightly decreases on further increase in the amount of solvent and becomes almost constant. It can be also seen that gel content was not formed under the use of solvent. It means that solvent prevented cross-linking reaction due to chain transfer reactions to solvent molecules. Studies of melt viscosity at $140^{\circ}C$ showed that viscosity increased after grafting of maleic anhydride onto polyethylene wax.

Association between Heated Tobacco Products Use and Suicidal Behaviors among Adolescents (청소년의 궐련형 전자담배 사용과 자살관련행동과의 관계)

  • Cho, Jun Ho
    • Journal of Environmental Health Sciences
    • /
    • v.46 no.4
    • /
    • pp.388-397
    • /
    • 2020
  • Objectives: The aim of this study was to assess the association between the use of heated tobacco products (HTP) and suicidal behaviors such as suicidal ideation, suicide planning, and suicide attempts among adolescents in South Korea. Methods: The study used a cross-sectional design. Data was from the 15th Korea Youth Risk Behavior Web-based Survey (KYRBS) performed in 2019 by the Ministry of Education, Ministry of Health and Welfare, and Korean Center for Disease Control and Prevention. Heated tobacco product use was used as a main independent variable and suicide-related behaviors such as suicidal ideation, planning, and attempts were applied as dependent variables. Out of 60,100 students, 57,303 responded. Results: HTP use significantly increased the odds of a suicide attempt and suicide planning among adolescents. After controlling for confounders, when comparing 'current HTP users' with 'never HTP users', the adjusted odds ratio (OR) was 1.78 (95% confidence interval (CI): 1.38-2.30) for suicide attempts among adolescents. After controlling the confounders, comparing 'current HTP users' with 'never HTP users', the adjusted OR was 1.36 (95% CI: 1.06-1.73) for suicide planning among adolescents. For sadness/despair among adolescents, when comparing 'current HTP users' with 'never HTP users', the adjusted OR was 1.29 (95% CI: 1.11-1.50). However, HTP use had no significant association with suicidal ideation among adolescents. Conclusions: Current HTP users were more likely to attempt to commit suicide, and more likely to plan to commit suicide than never HTP users among adolescents. These results may be useful in developing a scientific basis for designing suicide prevention programs targeting adolescents.

Measurement of Heavy Metals Using Portable XRF in Children's Playing Goods (Portable XRF를 이용한 어린이 야외 놀이용품의 중금속 측정)

  • Kim, Hyung-Jin;Baek, Young Man;Jung, Kyung Hoon;Hong, Suk Youn;Heo, Hwa Jin;Seong, Jin Uk;Park, Je Chul
    • Journal of Environmental Science International
    • /
    • v.22 no.4
    • /
    • pp.471-479
    • /
    • 2013
  • The present study was conducted to judge the applicability of field quality control by children's goods manufacturers by assessing the contents of heavy metals such as Pb and Cd in outdoor play goods for children through measurement using Portable XRF and comparing the results through detailed analyses using ICP. Heavy metal contents of 711 part samples of 505 products were measured using XRF. According to the results, the ratio of products that exceeded the Pb and Cd content standards specified under the Quality Management and Safety Control of Industrial Products Act were 2.4% and 2.6%. Many products certified for self-regulated safety exceeded the standards and thus it was considered that harmful chemical material centered safety management systems would be necessary. Detailed ICP analyses of some products were compared and the results showed deviations of 0.9~80.8% from XRF results. The reasons for this are deviations in the characteristics of measured cross sections and the homogeneity of samples resulting from sample preparation methods, etc. Therefore, it is considered that field quality control will be applicable if measuring methods are efficiently established based on product characteristics and calibration curve preparation methods are established through quality control.

Application of LATE-PCR to Detect Candida and Aspergillus Fungal Pathogens by a DNA Hybridization Assay

  • Gopal, Dhayaalini Bala;Lim, Chua Ang;Khaithir, Tzar Mohd Nizam;Santhanam, Jacinta
    • Microbiology and Biotechnology Letters
    • /
    • v.45 no.4
    • /
    • pp.358-364
    • /
    • 2017
  • Asymmetric PCR preferentially amplifies one DNA strand for use in DNA hybridization studies. Linear-After-The-Exponential-PCR (LATE-PCR) is an advanced asymmetric PCR method which uses innovatively designed primers at different concentrations. This study aimed to optimise LATE-PCR parameters to produce single-stranded DNA of Candida spp. and Aspergillus spp. for detection via probe hybridisation. The internal transcribed spacer (ITS) region was used to design limiting primer and excess primer for LATE-PCR. Primer annealing and melting temperature, difference of melting temperature between limiting and excess primer and concentration of primers were optimized. In order to confirm the presence of single-stranded DNA, the LATE-PCR product was hybridised with digoxigenin labeled complementary oligonucleotide probe specific for each fungal genus and detected using anti-digoxigenin antibody by dot blotting. Important parameters that determine the production of single-stranded DNA in a LATE-PCR reaction are difference of melting temperature between the limiting and excess primer of at least $5^{\circ}C$ and primer concentration ratio of excess primer to limiting primer at 20:1. LATE-PCR products of Candida albicans, Candida parapsilosis, Candida tropicalis and Aspergillus terreus at up to 1:100 dilution and after 1 h hybridization time, successfully hybridised to respective oligonucleotide probes with no cross reactivity observed between each fungal genus probe and non-target products. For Aspergillus fumigatus, LATE-PCR products were detected at 1:10 dilution and after overnight hybridisation. These results indicate high detection sensitivity for single-stranded DNA produced by LATE-PCR. In conclusion, this advancement of PCR may be utilised to detect fungal pathogens which can aid the diagnosis of invasive fungal disease.

Association between Shammah Use and Oral Leukoplakia-like Lesions among Adult Males in Dawan Valley, Yemen

  • Al-Tayar, Badr Abdullah;Tin-Oo, Mon Mon;Sinor, Modh Zulkarnian;Alakhali, Mohammed Sultan
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.16 no.18
    • /
    • pp.8365-8370
    • /
    • 2016
  • Background: Shammah is a traditional form of snuff dipping tobacco (a smokeless tobacco form) that is commonly used in Yemen. Oral mucosal changes due to the use of shammah can usually be observed in the mucosal surfaces that the product touches. The aim of this study was to determine the association between shammah use and oral leukoplakia-like lesions. Other associated factors were also determined. Materials and Methods: A cross sectional study was conducted on 346 randomly selected adult males. Multi-stage random sampling was used to select the study location. After completing the structured questionnaire interviews, all the participants underwent clinical exanimation for screening of oral leukoplakia-like lesions Clinical features of oral leukoplakia-like lesion were characterized based on the grades of $Ax{\acute{e}}ll$ et al (1976). Univariable logistic regression and multivariable logistic regression were used to assess the potential associated factors. Results: Out of 346 male participants aged 18 years and older, 68 (19.7%) reported being current shammah users. The multivariable analysis revealed that age, non-formal or primary level of education, former shammah user, current shammah user, and frequency of shammah use per day were statistically associated with the presence of oral leukoplakia-like lesions [Adjusted odds ratio (AOR) = 1.03; 95% confidence interval (CI) : 1.01, 1.06; P=0.006], (AOR=8.65; 95% CI: 2.81, 26.57; P=0.001), (AOR=3.65; 95% CI: 1.40, 9.50; P=0.008), (AOR=12.99; 95% CI: 6.34, 26.59; P=0.001), and (AOR=1.17; 95% CI: 1.02, 1.36; P=0.026), respectively. Conclusions: The results revealed oral leukoplakia-like lesions to be significantly associated with shammah use. Therefore, it is important to develop comprehensive shammah prevention programs in Yemen.