• 멤브레인
• /
• 제19권4호
• /
• pp.333-340
• /
• 2009

본 연구의 목적은 중금속 흡착을 위한 방사선 그라프트 중합법에 의한 이온교환막의 성능 향상을 위한 것이다. 그라프트 체인의 이온교환기에 의해 체인이 막의 pore를 방해하여 투과유속이 크게 저하되는 문제를 해결하고자 그라프트 체인과 체인사이를 N-ethyleneglycoldimethacrylate계 가교제를 첨가하여 투과유속이 저하되는 문제를 해결하고자 했다. 이때 사용된 가교제는 길이가 서로 다른 ethylene glycol dimethacrylate (EDMA)와 diethylene glycol dimethacrylate (DDMA)를 사용하였다. GMA 막에 가교제가 첨가된 이온교환막에 술폰산기를 첨가한 막을 이용하여 중금속 이온($Pb^{2+}$) 흡착을 하였다. 술폰산기 밀도가 1.40 mmol/g인 EDMA막은 13.82 mg/g을 흡착하였고, 술폰산기 밀도가 2.14 mmol/g인 DDMA막은 17.37 mg/g의 흡착량을 보였다.

• Journal of Periodontal and Implant Science
• /
• 제50권6호
• /
• pp.406-417
• /
• 2020

Purpose: This study investigated whether the placement of ribose cross-linked collagen (RCLC) membranes without primary soft tissue closure predictably resulted in sufficient alveolar ridge preservation in contained and non-contained extraction sockets. Methods: Membranes were positioned across extraction sockets, undermining full-thickness flaps, and the gingival margins were fixed by double-interrupted sutures without crossed horizontal mattress sutures for 1 week. In non-contained sockets, a bone substitute was used to support the membrane within the bony envelope. Radiographs and clinical images obtained 4 months later were analyzed by ImageJ software using non-parametric tests. Results: In 18 patients, 20 extraction sockets healed uneventfully and all sites received standard-diameter implants (4.1, 4.8, or 5.0 mm) without additional bone augmentation. Soft tissues and the muco-gingival border were well maintained. A retrospective analysis of X-rays and clinical photographs showed non-significant shrinkage in the vertical and horizontal dimensions (P=0.575 and P=0.444, respectively). The new bone contained vital bone cells embedded in mineralized tissues. Conclusions: Within the limitations of this pilot study, open healing of RCLC membranes may result in sufficient bone volume for implant placement without additional bone augmentation in contained and non-contained extraction sockets.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.231-238
• /
• 2023

Microporous gel films of 29 m were prepared by the gel drawing of UHMWPE/soybean oil blend (4:6, w/w) up to 800%. The stretched films containing the optimal photoinitiator concentration, depending on the film thickness, was cross-linked under 365 nm LED-UV irradiation and the oil was extracted with n-hexane, resulting in a gel fraction of 95 % or more. With the formation of the cross-linked structure, the melt-down temperature and melt-down elongation increased by 16 ℃ and by 63% respectively. Also the thermal stability of the crosslinked UHMWPE was proved by the area shrinkage under the heat treatment decreased to 3.8 % compared to 17.4 % for the pristine film, and by the reductions in the combustion heat. The enhanced thermal stability of the crosslinked UHMWPE microporous membranes can be used for various industrial applications such as filters, electric vehicles and energy storage systems.

• 멤브레인
• /
• 제32권6호
• /
• pp.427-441
• /
• 2022

고분자 전해질 막 연료전지(polymer electrolyte membrane fuel cell, PEMFC)의 핵심 구성요소 중 하나인 고분자 전해질 막(polymer electrolyte membrane, PEM)은 수소이온을 애노드(anode)에서 캐소드(cathode)로 이동시키는 전해질의 역할 및 연료의 투과를 막는 분리막으로서의 역할을 수행하며 PEMFC의 성능 및 효율을 결정짓는 핵심 소재이다. 현재 나피온 (Nafion^®)으로 대표되는 과불소화계 전해질 막이 높은 수소이온 전도도 및 화학적 안정성으로 인해 상용화 되었지만, 높은 생산비용과 구동 시 환경오염 물질이 배출된다는 문제점을 갖고 있다. 이를 대체할 PEM 소재로써 고분자의 구조 조절 및 개질 과정이 용이한 다양한 종류의 탄화수소계 고분자가 제시되고 있지만, 실제 PEMFC에 적용되기 위해서는 성능 및 내구 특성을 개선해야 하는 과제가 남아있다. 이에 본 총설은 탄화수소계 PEM의 성능 및 내구 특성을 향상시키기 위해 1) 가교 구조를 도입한 가교 막 개발, 2) 무기 첨가제 도입을 통한 유⋅무기 복합 막 개발 및 3) 다공성 지지체를 활용한 강화 복합막을 개발하는 연구에 대해 살펴보고자 한다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권2호
• /
• pp.112-119
• /
• 2011

Purpose: Collagen membranes are used extensively as bioabsorbable barriers in guided bone regeneration. However, collagen has different effects on tissue restoration depending on the type, structure, degree of cross-linking and chemical treatment. The purpose of this study was to evaluate the inflammatory reaction, bone formation, and degradation of dehydrothermal treated porcine type I atelocollagen (CollaGuide$^{(R)}$) compared to of the non-crosslinked porcine type I, III collagen (BioGide$^{(R)}$) and the glutaldehyde cross-linked bovine type I collagen (BioMend$^{(R)}$) in surgically created bone defects in rat mandible. Methods: Bone defect model was based upon 3 mm sized full-thickness transcortical bone defects in the mandibular ramus of Sprague-Dawley rats. The defects were covered bucolingually with CollaGuide$^{(R)}$, BioMend$^{(R)}$, or BioGide$^{(R)}$ (n=12). For control, the defects were not covered by any membrane. Lymphocyte, multinucleated giant cell infiltration, bone formation over the defect area and membrane absorption were evaluated at 4 weeks postimplantation. For comparison of the membrane effect over the bone augmentation, rats received a bone graft plus different covering of membrane. A $3{\times}4$ mm sized block graft was harvested from the mandibular angle and was laid and stabilized with a microscrew on the naturally existing curvature of mandibular inferior border. After 10 weeks postimplantation, same histologic analysis were done. Results: In the defect model at 4 weeks post-implantation, the amount of new bone formed in defects was similar for all types of membrane. Bio-Gide$^{(R)}$ membranes induced significantly greater inflammatory response and membrane resorption than other two membranes; characterized by lymphocytes and multinucleated giant cells. At 10 weeks postoperatively, all membranes were completely resorbed. Conclusion: Dehydrotheramal treated cross-linked collagen was safe and effective in guiding bone regeneration in alveolar ridge defects and bone augmentation in rats, similar to BioGide$^{(R)}$ and BioMend$^{(R)}$, thus, could be clinically useful.

• 멤브레인
• /
• 제32권6호
• /
• pp.442-455
• /
• 2022

고온 구동형 고분자 전해질 막 연료전지(high temperature polymer electrolyte membrane fuel cell, HT-PEMFC)는 전극의 빠른 활성과 피독 현상에 대한 높은 저항성으로 인해 저온 구동형 PEMFC의 대안으로 많은 연구가 진행되고 있다. 폴리벤즈이미다졸(polybenzimidazole, PBI)을 기반으로 한 PEM의 경우 고온 구동 조건에서 이온 전도성 물질과의 높은 상호 작용과 우수한 열적ㆍ기계적 안정성 특징으로 인해 HT-PEMFC용 PBI 기반 전해질 막 개발과 관련된 다양한 연구들이 진행되고 있다. 본 총설에서는 고성능/고내구성의 PBI 기반 PEM을 개발하기 위해 1) 인산 및 다양한 이온전도성 물질이 도핑된 PBI 막의 특성 분석과 막 제조법에 따른 PBI 막의 물성 비교에 관한 연구를 우선적으로 살펴본 후 2) 다공성 폴리테트라플루 오르에틸렌 지지체 및 무기 입자 혼입을 통한 PBI 복합 막의 성능 개선 연구 및 3) 고분자 블렌딩을 통해 가교 구조가 도입된 PBI 기반 가교 막의 내구성 향상에 관한 연구 동향에 대하여 소개하고자 한다.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.17-23
• /
• 2017

Polyether ether ketone (PEEK) composite including tungstophosphoric acid(TPA) membranes have been intensively investigated for polymer electrolyte membrane water electrolysis (PEMWE) and thus covalently linked sulfonated polyether ether ketone (CL-SPEEK) with captured TPA composite membranes were prepared and characterized. Sulfonated polyether ether ketone (SPEEK) was prepared in sulfonation of PEEK and was cross-linked with 1,4 diiodobutane. The carbonyl group of SPEEK was reduced with $NaBH_4$ and 3-isocyanatepropyltriethoxysilane (ICPTES) was added. The TPA captured composite was prepared in reaction of TPA with 3-mercaptopropyltrime thoxysilane (MPTMS). The polymer composite membranes showed better thermostability and electrochemical properties than SPEEK. The membranes were prepared by sol-gel casting method. The polymer composite membrane featured 0.1285 S/cm of proton conductivity at $80^{\circ}C$ and outstanding durability.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.437-447
• /
• 2012

Ceria ($CeO_2$) was used to scavenge free radicals which attack the membrane in the polymer electrolyte membrane water electrolysis (PEMWE) circumstance and to increase the duration of the membrane. In order to improve the electrochemical, mechanical and electrocatalytic characteristics, engineering plastic of the sulfonated polyether ether ketone (SPEEK) as polymer matrix was prepared in the sulfonation reaction of polyether ether ketone (PEEK) and the organic-inorganic blended composite membranes were prepared by sol-gel casting method with loading the highly dispersed ceria and cesium-substituted tungstophosphoric acid (Cs-TPA) with cross-linking agent contents of 0.01 mL. In conclusion, CL-SPEEK/Cs-TPA/ceria (1%) membrane showed the optimum results such as 0.130 S/cm of proton conductivity at $80^{\circ}C$, 2.324 meq./g-dry-membrane of ion exchange capacity and mechanical characteristics, and 65.03 MPa of tensile strength which were better than Nafion 117 membrane.

• 멤브레인
• /
• 제34권1호
• /
• pp.70-78
• /
• 2024

본 연구에서는 역전기투석용 4차 암모늄이온을 음이온교환기로 갖는 폴리아크릴레이트계 광가교형 음이온교환막을 개발하였다. 역전기투석은 청정 재생에너지 생산 시스템이지만 출력이 낮고 핵심 소재인 분리막의 가격이 비싸다는 단점으로 인해 상용화에 제한이 있다. 이에, 지지체가 없는 광가교형 음이온교환소재를 제조하였으며 개발한 고분자의 주쇄는 우수한 물성의 엔지니어링 플라스틱을 기반으로 제조하였다. 제조된 분리막은 우수한 물리적, 화학적, 전기화학적 특성을 보였으며 상용 음이온교환막인 AMV와 비교하여 약 50% 낮은 분리막 저항을 보였다. 더욱이 CQAPPOA-35는 40 ㎛의 얇은 분리막 두께에도 불구하고 상용막과 동등 수준의 선택도를 보이는 것을 확인할 수 있었다. CQAPPOA-35을 적용한 RED 스택은 최대 2.327 W m^-2 (flow rate : 100 mL min^-1)의 출력 밀도를 보여 AMV가 도입된 것보다 15% 향상된 성능 특성을 보였다. 개발된 CQAPPOA-35이 광경화를 통해 쉽고 저렴하게 제조할 수 있으며 RED 스택 특성도 매우 우수하다는 점을 고려할 때, 개발된 CQAPPOA-35은 RED용 음이온교환막으로 상용 활용을 위한 대안이 될 수 있을 것으로 기대된다.

• 한국수소및신에너지학회논문집
• /
• 제25권6호
• /
• pp.561-569
• /
• 2014

Ceria ($CeO_2$) was used to increase the durability of the membrane in the polymer electrolyte membrane water electrolysis (PEMWE) circumstance. The sulfonated polyether ether ketone (SPEEK) as polymer matrix was prepared in the sulfonation reaction of polyether ether ketone (PEEK) to improve electrochemical characteristics. After sulfonation reaction, the organic-inorganic blended composite membranes were prepared by means of sol-gel casting method with loading the highly dispersed $CeO_2$ and Cs-substituted molybdophosphoric acid (Cs-MoPA) with cross-linking agent (tetrapropyl orthosilicate). Consequently, the composite membrane CL-SPEEK/Silane 4wt%/Cs-MoPA/Ceria(1%) showed the improved characteristics such as 82% of water content, 0.11136 S/cm of proton conductivity at $80^{\circ}C$, 55.50 MPa of tensile strength and 4.37% of breeding out of MoPA.