• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1106-1115
• /
• 2021

In this study, a fin that controls ship stern flow was attached on stern hull of a 80k bulk carrier to improve resistance performance. The rectangular cross-sectional fin was attached at several locations on the hull, and angle to streamline was changed with constant length, breadth, and thickness. The resistance performance and wake on propeller plane of the hull with and without the fin were analyzed using model-scale computational fluid dynamics simulation. The analysis results were extrapolated to full-scale to compare the performance and wake of the full-scale ship. First, the fin changed path of bilge vortex that flowed into the propeller along the stern hull without the fin to transom stern. This change increased pressure of the stern hull and upper region of the propeller, so pressure resistance and total resistance of the hull were reduced - the nearer the fin location to after perpendicular (AP) and base line of the hull, the larger the reduction of the resistances. Second, nominal wake fraction of the hull with the fin was lower than that without the fin. This dif erence was in proportion to the angle of the fin, but the total resistance reduction was in proportion until a certain angle at which the reduction was maximum. The largest total resistance reduction was approximately 2.1% at 12.5% of length between perpendiculars from the AP, 10% of draft from the base line, and 14° with respect to the streamline.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.451-463
• /
• 2022

Whenever a mineshaft accidentally collapses, speedy risk assessment is both required and crucial. But onsite safety diagnosis by humans is reportedly difficult considering the additional risk of collapse of the unstable mineshaft. Generally, drones equipped with high-speed lidar sensors can be used for such inspection. However, the drone technology is restrictively applicable at very shallow depth, failing in mineshafts with depths of hundreds of meters because of the limit of wireless communication and turbulence inside the mineshaft. In previous study, a three-dimensional (3D) scanning system with a single channel lidar was fabricated and operated using towed cable in a mineshaft to a depth of 200 m. The rotation and pendulum movement errors of the measuring unit were compensated for by applying the data of inertial measuring unit and comparing the similarity between the scan data of the adjacent depths (Kim et al., 2020). However, the errors grew with scan depth. In this paper, a multi-channel lidar sensor to obtain a continuous cross-sectional image of the mineshaft from a winch system pulled from bottom upward. In this new approach, within overlapped region viewed by the multi-channel lidar, rotation error was compensated for by comparing the similarity between the scan data at the same depth. The fabricated system was applied to scan 0-165 m depth of the mineshaft with 180 m depth. The reconstructed image was depicted in a 3D graph for interpretation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.253-263
• /
• 2022

A buccal pit is a prominent point-like depression that appears at the cervical end of the mandibular molar developmental grooves. A defective buccal pit can be defined as a buccal pit in which the continuity of the dentinoenamel junction is broken and the pit extends to the dentinal level. This study aimed to determine the frequency of buccal pits and defective buccal pits in un-erupted mandibular first and second molars using cone-beam computed tomography (CBCT). The analysis was performed on CBCT images taken from 417 Korean children and adolescents who visited the Department of Pediatric Dentistry, Yonsei University Dental Hospital between 2004 and 2020. Based on cross-sectional views of CBCT images, buccal pits were categorized into 4 classes according to the depth of the pits. The expression rate of the buccal pits was 29.1%. The prevalence of defective buccal pits was 7.9%. The buccal pits tended to develop bilaterally. To date, this is the most comprehensive study on the frequency of buccal pits with the largest sample size. This was the first attempt worldwide to analyze the depth of the buccal pit using CBCT images and to define a defective buccal pit worldwide.

• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.421-430
• /
• 2022

Crop load management in apple trees is important for achieving optimum productivity and crop value. Hence, we investigated the influence of different crop loads on the fruit quality, mineral content, and yield of the 'RubyS' apple variety. After 4 weeks of full bloom, the crop load was adjusted by hand thinning to different (5, 10, and 15 fruits·cm^-2) trunk cross-sectional areas (TCSA), representing low, medium, and high crop loads. The low crop load increased the fruit size and weight, the development of the red-blushed area, and the peel color a^* at harvest; however, it reduced the total number of fruits·tree^-1 and yield compared with that of the other crop loads. The medium crop load improved the fruit weight, flesh firmness, and soluble solids content and reduced the fruits·tree^-1 but did not affect the fruit size and yield. However, there were no significant differences in the titratable acidity and starch index among the crop loads. The fruit mineral content (phosphorus and potassium) was higher in the low and medium crop loads compared to the high crop load. However, the nitrogen, calcium, and magnesium contents in the fruits were not affected by the crop loads. Overall, this study suggests that a low crop load improves the fruit size and weight, but its effect on the quality and fruit mineral content is similar to that of a medium crop load. Therefore, the optimum crop load level for the 'RubyS' apple trees was approximately 10 fruits·cm^-2 TCSA.

• Journal of Animal Science and Technology
• /
• v.64 no.1
• /
• pp.52-69
• /
• 2022

Ferulic acid (FA) is a phytochemical with various bioactive properties. It has recently been proposed that due to its phytogenic action it can be used as an alternative growth promoter additive to synthetic compounds. The objective of the present study was to evaluate the growth performance, carcass traits, fiber characterization and skeletal muscle gene expression on hair-lambs supplemented with two doses of FA. Thirty-two male lambs (n = 8 per treatment) were individually housed during a 32 d feeding trial to evaluate the effect of FA (300 and 600 mg d^-1) or zilpaterol hydrochloride (ZH; 6 mg d^-1) on growth performance, and then slaughtered to evaluate the effects on carcass traits, and muscle fibers morphometry from Longissimus thoracis (LT) and mRNA abundance of β₂-adrenergic receptor (β₂-AR), MHC-I, MHC-IIX and IGF-I genes. FA increased final weight and average daily gain with respect to non-supplemented animals (p < 0.05). The ZH supplementation increased LT muscle area, with respect to FA doses and control (p < 0.05). Cross-sectional area (CSA) of oxidative fibers was larger with FA doses and ZH (p < 0.05). Feeding ZH increased mRNA abundance for β₂-AR compared to FA and control (p < 0.05), and expression of MHC-I was affected by FA doses and ZH (p < 0.05). Overall, FA supplementation of male hair lambs enhanced productive variables due to skeletal muscle hypertrophy caused by MHC-I up-regulation. Results suggest that FA has the potential like a growth promoter in lambs.

• Journal of Nutrition and Health
• /
• v.55 no.1
• /
• pp.188-199
• /
• 2022

Purpose: This study investigated the relationship between 3 major constructs of the theory of planned behavior (TPB), i.e., attitude, subjective norms and perceived behavioral control (PBC) and past experience of healthy eating and intentions of healthy eating in the short-term and long-term in adults living in Shanghai and parts of Anhui Province, China. Methods: The online study questionnaire for this cross-sectional study was based on previously validated items. A total of 408 Chinese adults (aged 18-64 years) residing in Shanghai and parts of Anhui Province, China were included to examine relationships between 3 major constructs of TPB and past experience of healthy eating, and short-term and long-term intentions of healthy eating. Multiple linear regression model adjusted for age and body mass index (BMI) was employed to test relationships. Results: Only PBC among 3 major constructs of TPB was significantly related to short-term (p < 0.001) and long-term (p = 0.002) intention of healthy eating after adjustment for age and BMI. Past experience of healthy eating was more significantly related to long-term intention (p < 0.001) compared to short-term (p = 0.020) intention of healthy eating. The short-term and long-term intention models explained 70.5% and 48.8% of the variance, respectively. Conclusion: PBC is a potential determinant of both short-term and long-term behavioral intention of healthy eating regardless of past experience of healthy eating in adults residing in Shanghai and parts of Anhui Province, China. Our results indicate that programs promoting healthy eating to Chinese adults incorporate PCB to perform healthy eating under his or her control.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.671-684
• /
• 2022

This study verified the stability of a high-strength combined buried pile retaining wall and its applicability in the field. A cast-in-place (C.I.P) retaining wall and the high-strength combined embedded pile retaining wall were compared and analyzed numerically. The numerical analysis assessed the ground behavior and stability (and thus field applicability) of a high-strength combined buried pile retaining wall using data measured in the field. The experimental results showed that the cross-sectional force and displacement of the high-strength bonded pile retaining wall were reduced by 13.6~19.7%, the shear force increased by 0.7~4.7%, and the bending moment increased by 4.5~8.8% relative to the values for the C.I.P retaining wall. Examination of the amount of subsidence in the ground around the excavation showed that the maximum settlement of the C.I.P retaining wall was 46.89 mm and that at the high-strength combined buried pile retaining wall was 39.37 mm. Overall, designing a high-strength combined embedded pile retaining wall by applying the maximum bending moment and shear force calculated using the elastic beam method to the site ground was shown to achieve the safety of all members, as member forces were generated within the elastic region.

• Safety and Health at Work
• /
• v.13 no.2
• /
• pp.163-169
• /
• 2022

Background: It is estimated that about 13 million artisanal and small-scale miners carry out their activities under harsh, precarious, unfriendly, and risky conditions. Yet, our understanding of the extent to which these workers use personal protective equipment (PPE) and navigate through the various risks and hazards they face is still limited. This article has two main objectives. First, it explores the extent of usage of PPE among artisanal and small-scale miners for the prevention of hazards and risks. Second, it examines the coping strategies used by these miners as a response to experiences of occupational injuries and risks Methods: A cross-sectional survey of small-scale miners was conducted in six communities across three districts in Ghana, West Africa. The mixed methods approach was adopted. A total of 148 small-scale miners participated in the study. Six focus group discussions (FGDs) were held across the six communities. The data were analysed using descriptive statistics. Chi-square tests were used to analyse the relationship between some socio-demographic characteristics (sex, age, and educational background) and the usage of PPE. Open-ended questions and responses from FGDs were analysed based on the content and verbatim quotations from miners. Results: Findings suggest that 78% of the miners interviewed do not use the appropriate PPE citing reasons such as cost, and their personal discomfort associated with use of PPE. There was no significant relationship between socio-demographic characteristics (i.e., sex, age, education and major mining activity) and the usage of PPE. The study further revealed four main coping strategies used by miners to handle the risks. These are rest, taking unprescribed medication and hard drugs, registration with health insurance scheme and savings and investments. Conclusion: This study shows that very few artisanal miners use PPE despite the significant hazards and risks to which they are exposed. The study recommends to the government to put in place measures to ensure that miners adhere to health and safety regulations before undertaking mining activities. This means that health and safety plans and use of PPE should be linked to the license acquisition process for miners.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.62-69
• /
• 2022

EHA (Electro-Hydrostatic Actuator) is more energy efficiency than a centralized hydraulic system. In particular, the EHA used for aircraft has a redundant design in preparation for failure scenario. Also, due to the aircraft's internal space limitation, the actuator's length must be optimized. Therefore, a series configuration of double rod and single rod cylinder is advantageous. However, due to the asymmetry of the cross-sectional area of the piston, the force fighting phenomenon between the two cylinder areas occurs during redundant operation with a general control system. In this paper, the force fighting phenomenon of redundant EHA was simulated. A controller with load compensation and a force control-based position controller as a method to suppress its stimulation

• Korean Journal of Community Nutrition
• /
• v.28 no.1
• /
• pp.48-60
• /
• 2023

Objectives: The purpose of this study was to compare the sex-associated differences in the dietary intake of gastric cancer patients in Korea. Methods: Data from the Korea National Health and Nutrition Examination Survey (KNHANES) the 7^th (2016-2018) were analyzed in the present study. The subjects included 122 gastric cancer patients aged over 40 years (75 male, 47 female). General characteristics (age, marital status, household income, education, food security, comorbidities, alcohol drinking, and smoking), anthropometric characteristics (height, weight, body mass index, and blood pressure), blood biochemical characteristics [fasting plasma glucose (FPG), blood urea nitrogen (BUN), creatinine, triglyceride, total cholesterol, and HDL-cholesterol)], and quantity and quality of dietary intake were compared between male and female participants. Results: Males had higher rates of having a spouse, prevalence of hypertension, alcohol drinking, and smoking than females. The proportion of males with a normal range of FPG, BUN, and HDL-cholesterol was lower than that in females. The total cholesterol levels above the normal range were higher in females than in males. We also found that females had a higher percentage of intakes below the estimated energy requirement (EER) and intakes below the estimated average requirement (EAR) for carbohydrates, niacin, phosphorus, and iron than males. The index of nutritional quality (INQ) for phosphorus and folate, nutrient adequacy ratio (NAR) for vitamin C, thiamine, niacin, folate, calcium, and phosphorus, and the mean adequacy ratio (MAR) were lower in females than males. Conclusions: In Korean gastric cancer patients, management of comorbidities such as diabetes and hypertriglyceridemia, lowering FPG, and raising HDL-cholesterol level management is required for males, whereas management of lowering total cholesterol and raising hematocrit is required for females. The quantitative and qualitative nutritional intakes were poor in gastric cancer patients, especially in females, who had a lower nutritional intake than males. We suggest that nutritional interventions are needed to improve the overall nutritional intake in both male and female gastric cancer patients. In particular, we propose that support is urgently needed for females whose nutritional intake is lower than that of males. In addition, family, social, and national support for nutritional management of female gastric cancer patients is highly necessary.