• Journal of Nutrition and Health
• /
• v.49 no.6
• /
• pp.482-494
• /
• 2016

Purpose: The objective of the present study was to evaluate nutrient and food group intakes in Korean adults according to energy intake from eating-out. Methods: This study was a cross-sectional study based on the 2013~2014 Korea National Health and Nutritional Examination Survey, and study subjects were 5,186 males (2,151) and females (3,035) aged 19~64 years. Energy intake from eating-out was analyzed using the 24-hour dietary recall method, and groups were classified by quartile according to energy intake from eating-out. Results: Subjects who had more energy intake from eating-out tended to be younger, highly educated, have a higher income, and have higher alcohol consumption. Total energy intake and fat intake density of the highest quartile group of energy intake from eating-out were higher than those of the other groups. However, fiber, vitamin $B_1$, calcium, phosphorus, potassium, and iron intake density levels were significantly lower in the highest quartile group of energy intake from eating-out. The highest quartile group of energy intake from eating-out consumed significantly more meat and beverages compared to the other groups. In addition, regarding diet quality (Index of nutritional quality), significantly lower vitamin $B_1$, calcium, phosphorus, and iron levels were observed in the highest quartile group of energy intake from eating-out compared to those in the other groups. Conclusion: In conclusion, in Korean adults, consumption of eating-out decreased dietary quality, including vitamin $B_1$, calcium, phosphorus, and iron levels. Further studies are needed to confirm these findings.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.4
• /
• pp.259-268
• /
• 2005

There has been a growing interest in the elimination of anoxic layer in the Youngsan River Estuarybecause the anoxic water mass caused mainly by the inflow of fresh water from the sea wall might cause the mass reduction of benthos during summer. An ocean outfall system to discharge treated wastewater into sea water may be used as one of the effective and economical ways to eliminate the anoxic layer. The suitable ocean outfall design is generally proposed for the prediction of the buoyant jet behavior in the near field. The parameters including CTD and current data are taken into account f3r more reliable buoyant jet behavior calculation. One of the numerical models, CORMIX 1, approved by EPA is used herein for the prediction of the trajectorial variation of the cross-sectional salinity and DO concentration distribution on the calculated buoyant jet boundary according to the tidal periods. On the basis of the results, it is suggested that the single port outfall is a useful system to eliminate the anoxic layer. Proper strategies are also proposed for achieving desirable ambient conditions.

• Korean Journal of Community Nutrition
• /
• v.20 no.2
• /
• pp.129-140
• /
• 2015

Objectives: We examined the association between the adherence to dietary guidelines for breast cancer survivors and health-related quality of life in a cross-sectional study of Korean breast cancer survivors. Methods: A total of 157 women aged 21 to 79 years who had been diagnosed with stage I to III breast cancers according to the American Joint Committee on Cancer (AJCC) and had breast cancer surgery at least 6 months before the baseline were included. We used a Korean version of the Core 30 (C30) and Breast cancer 23 (BR23) module of the European Organization for Research and Treatment Cancer Quality of Life Questionnaire (EORTC-QLQ), both of which have been validated for Koreans. Participants were asked about their adherence to dietary guidelines for breast cancer survivors, suggested by the Korean breast cancer society, using a 5-point Likert scale. We summed dietary guideline adherence scores for each participant and calculated the least squares means of health-related quality of life according to dietary guideline adherence scores using the generalized linear model. Results: Breast cancer survivors who had higher adherence to dietary guidelines for breast cancer survivors had lower constipation scores than those with lower adherence (p for trend=0.01). When we stratified by the stage at diagnosis, this association was limited to those who had been diagnosed with stage II or III breast cancers. Also, sexual functioning scores increased significantly with increasing adherence scores of dietary guidelines among those with stage II or III breast cancers (p for trend < 0.001). However, among those who had been diagnosed with stage I, higher scores of dietary guidelines were associated with higher scores of pain (p for trend=0.03) and breast symptoms (p for trend=0.05). Conclusions: Our study suggested that the health-related quality of life levels of breast cancer survivors are associated with the adherence to dietary guidelines and may differ by the stage of the breast cancer.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.155-165
• /
• 1992

Experiments were conducted to determined the development of the vascular bundles in the peduncle of different tillers on its development in order to improve the vascular system and possibly increase grain yield. The development of the vascular bundle in the leaf, stem and panicle is an important aspect of assimilate translocation and differentiation of panicle characters. Two cultivars were used in this study: IR58, an indica type, and Unbong 7, a japonica type. The main culm(M) had more and bigger vascular bundles in the peduncle and those vascular bundle decreased with tiller order and tiller development. In the primary tillers, P1 had more large and small vascular bundles than P5 in both cultivars. IR58 developed more large vascular bundles compared to Unbong 7, but the small vascular bundle in unbong 7 was more than in IR58. The cross sectional area of phloem and xylem in large vascular bundle decreased with tiller order in both cultivar. Larger area of phloem and xylem in the early formed tillers more efficient transport of assimilates. The number of spikelets, the weight of panicle and grain yield per panicle were highest in the main culm followed by the order of their initiation or emergence. The number of primary and secondary branches to be positive associated with the number and area of vascular bundles. Furthermore, the number of vascular bundles in the peduncle was highly correlated with the peduncle thickness which in turn was correlated with the number of primary and secondary branches on the panicle. These results showed tillers that are initiated early and have relatively ation usually have more vascular bundles, larger peduncle, more spikelets spike let filling and ultimately higher yield.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.277-285
• /
• 2019

This study was conducted to understand the growth characteristics of Picea jezoensis that was one of representative subalpine species in Korea, in the light of the effects of wind and micro-topography in its habitats on Mt. Deogyu, Korea. The prevailing wind directions were southwest and west at the study sites. We randomly selected P. jezoensis (height ≥ 1.5 m) on windward, intermediate, and leeward slopes and measured diameter at breast height (DBH), height, crown length by 8 directions in upper, middle and lower sectors of the crown. We examined the micro-topography of P. jezoensis stood on and classified it into 3 types: type 1 was mounded and fully exposed to surrounding environments without neighboring trees; type 2 was somewhat wind-protected by surrounding rocks, but no neighboring vegetation; type 3 was on gentle slope or flat where P. jezoensis grew with neighboring trees or shrubs. The ratios of height to DBH, and estimated crown growth to actual crown growth (hereafter crown growth ratio) were compared among the three types of micro-topography on windward, intermediate and leeward sites. The height growth per DBH and crown growth ratio in the upper and middle crowns were the smallest on the windward site, and the highest on the leeward site (p < 0.01). The crown growth ratio on type 1 on the windward site was only 46% of that on type 3 on the leeward site. Although on the same windward slope, trees on type 1 had more deformed crown shapes than that on Type 3, showing asymmetric crown cross-sectional areas. Wind and micro-topography played critical roles on the crown growth of P. jezoensis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.8
• /
• pp.555-563
• /
• 2020

Foward-swept wings are known to possess superior aerodynamic performance compared to the conventional straight wings. However major concerns regarding forward-swept wings include divergence at lower airspeeds which require careful consideration at the design stage. As an endeavor to overcome such drawbacks, aeroelastic tailoring is attempted. In order to find an optimal ply sequence, recursive aeroelastic analyses is conducted and one-dimensional beam analysis coupled with simple aerodynamics is used for the improved computational efficiency and modelling convenience. The analysis used in this paper, DYMORE and analytic formula, both use one-dimensional beam model for the structure. Cross-sectional analysis for multi-cell NACA0015 airfoil section is conducted using VABS and oblique function is used for the sweep angle. Throughout the present aeroelastic tailoring, the maximum divergence speed of 290.2m/s is achieved which is increased by approximately 43% than that for the conventional ply configuration.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.471-475
• /
• 2006

$VO_x$ thin films with the thickness of 450 nm were prepared on a $Pt/Ti/SiO_{2}/Si$ substrate at room temperature by a reactive radio frequency (rf) magnetron sputtering method. The deposition rates of $VO_x$ thin films were investigated as a function of $O_{2}$ concentration and rf power. As the $O_{2}$ concentration in a $O_{2}/Ar$ mixture increased, the deposition rate decreased. However, the deposition rate increased with increasing rf power. The deposited $VO_x$ thin films were annealed at $450^{\circ}C$ for 2, 4, and 6 h in $O_{2}$ and $N_{2}$ ambient. After annealing, the phase changes of $VO_x$ thin films were investigated using X-ray diffraction analysis. The plane and cross-sectional views of $VO_x$ thin films before and after annealing were observed by field emission scanning electron microscopy. The metal-insulator transition (MIT) properties of $VO_x$ thin films were measured using current-voltage measurement. The excellent MIT properties were observed in $VO_x$ thin films annealed in $O_{2}$ ambient.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.28-32
• /
• 2006

This study investigated the variation of flow rates in microchannels that consisted of polydimethyl siloxane (PDMS) and glass using various external voltages. Three different microchannel widths and two different depths. PDMS and negative photoresist (SU-8) were used to make the microchannels by the soft lithographic method. For each depth of microchannel ($50{\mu}m$ and $100{\mu}m$), three different widths ($100{\mu}m$, $200{\mu}m$ and $300{\mu}m$) were made. In each case, several different external voltages were applied (0.3 kV, 0.35 kV, 0.4 kV and 0.45 kV) to examine the flow rates. Our results indicated that flow rate increased with an increase of the external voltage at the same microchannel width. This was because the electrical field was increased as the external voltage increased. For the same external voltage, the flow rate increased as the microchannel's width increased. These results showed that the resistance in the microchannel decreased as the microchannel's width increased. Also, to investigate the effect of microchannel's depth and width, the cross-sectional area of the microchannel was increased to the double in area. As a result, the effect of the microchannel's depth was higher at a low external voltage, and the effect of the microchannel's width was higher at a high external voltage.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.2
• /
• pp.155-163
• /
• 2018

Bilirubin has an anti-inflammatory effect as an endogenous antioxidant and has been reported to be inversely correlated with hypertension, diabetes, metabolic syndrome, and insulin resistance. On the other hand, there is a lack of research evaluating the association between bilirubin and metabolic syndrome compared to liver-specific indicators. This study examined the association between the total bilirubin and metabolic syndrome prevalence in Korean adults who underwent health screening compared to ALT and GGT. This cross sectional study included 22,568 adult males and females aged 20 years or older who underwent a health examination at the General Hospital of Gyeonggi Province from March 2015 to February 2018. Metabolic syndrome was diagnosed based on the American Heart Association/National Heart, Lung, and Blood Institute (AHA/NHLBI) guidelines. In both genders, the metabolic syndrome diagnosed group had higher liver enzymes, and the total bilirubin and direct bilirubin were lower than those without the metabolic syndrome risk factors. The serum total bilirubin showed a weak inverse correlation with abdominal obesity (r=-0.066 vs r=-0.055) and triglyceride (r=-0.127 vs r=-0.136) in both males and females, which is weaker than ALT and GGT The data were statistically significant. In addition, total bilirubin as well as ALT and GGT in both men and women were not predictors of the likelihood of developing metabolic syndrome.

• Journal of Biomedical Engineering Research
• /
• v.23 no.4
• /
• pp.269-279
• /
• 2002

When we inject a current into an electrically conducting subject such as a human body, voltage and current density distributions are formed inside the subject. The current density within the subject and injection current in the lead wires generate a magnetic field. This magnetic flux density within the subject distorts phase of spin-echo magnetic resonance images. In Magnetic Resonance Current Density Imaging (MRCDI) technique, we obtain internal magnetic flux density images and produce current density images from $\bigtriangledown{\times}B/\mu_\theta$. This internal information is used in Magnetic Resonance Electrical Impedance Tomography (MREIT) where we try to reconstruct a cross-sectional resistivity image of a subject. This paper describes numerical techniques of computing voltage. current density, and magnetic flux density within a subject due to an injection current. We use the Finite Element Method (FEM) and Biot-Savart law to calculate these variables from three-dimensional models with different internal resistivity distributions. The numerical analysis techniques described in this paper are used in the design of MRCDI experiments and also image reconstruction a1gorithms for MREIT.