• 대한전자공학회논문지SD
• /
• 제48권6호
• /
• pp.39-44
• /
• 2011

본 논문은 배터리로부터 입력받은 제한된 전압 값을 변환하여 PMIC의 출력 전압 값에 대한 PCB 패턴의 두 가지 모드로 설계한 PCB 패턴의 특성분석을 제안하고자 한다. PCB 설계 기술은 EMI/EMC, 크로스토크, 임피던스 증가 등으로 국내에서는 관련 기술의 미확보로 많은 어려움을 겪고 있으며, 사용되는 용도에 따라 패턴 상호간의 적절한 이격거리 확보, 전류량에 따른 PCB 패턴 폭 등의 기술이 요구되고 있다. 본 논문에서는 PMIC의 출력 전압 값을 커패시터를 거치지 않고 직접 출력하는 방법[모드1]과 커패시터를 거쳐 출력하는 방법[모드2]으로 설계하여 PCB 패턴의 특성 분석을 수행하였다. 또한 IPC-2221에서 제시한 식을 이용하여 전류량에 따른 패턴 폭을 계산해 보았으며, 실험을 통한 패턴 설계에 따른 문제점을 분석하여 올바른 설계 방향을 제시하였다. 이러한 연구는 비단 모바일 패널 전원 공급을 위한 PMIC 설계에 적용될 뿐만 아니라 자동차, 카메라, 노트북, PDA 등의 다양한 분야의 전력 반도체 개발에 적용될 수 있을 것으로 기대된다.

• 정보보호학회논문지
• /
• 제25권5호
• /
• pp.1001-1009
• /
• 2015

스마트 그리드 안에서 고안된 스마트 미터는 우리가 사용하는 전력 신호를 실시간으로 데이터화해서 전력 공급단의 메인 서버로 전송한다. 이를 통해 전력 관리의 효율성은 증가한 반면, 사용자의 정보를 담은 데이터의 보안 문제가 새로운 위협으로 부상하였다. 본 논문은 스마트 미터에서 추출한 전력 데이터를 통해 가정 내 기기의 식별 및 기기별 사용패턴에 대한 추론을 보안 관점에서 해석함으로써 스마트 기기 환경에서 데이터 노출의 위협을 지적한다. 주성분분석(Principal Component Analysis)으로 데이터의 특징을 추출하였고 k-근접 이웃(k- Nearest Neighbor)분류기로 기기를 식별하고 기기상태를 추론하였으며, 검증방법으로는 10차 교차검증(10-fold Cross Validation)을 활용하였다.

• 한국전자파학회논문지
• /
• 제20권10호
• /
• pp.1097-1106
• /
• 2009

본 논문에서는 브랜치 소자를 갖는 십자형 모노폴 안테나를 제안하고 복사 특성을 확인하였다. 제안된 안테나의 광대역 특성을 확인하기 위하여 PCS, WCDMA, WiBro, S-DMB 대역(1,750~2.655 GHz)에서 안테나를 설계 제작하고 복사 특성을 측정하였다. 제안된 안테나는 수직면 내 지향성, 수평면 내 무지향성 특성을 가지며, VSWR은 주파수 1.72~2.82 GHz에서 1.5 이하, 안테나 이득은 1.9 dBi 이상으로 나타났다. 측정 결과로부터 제안된 안테나는 PCS, WCDMA, WiBro, S-DMB 대역에서 사용될 수 있는 광대역 특성을 갖는 안테나로 확인되었다.

• Journal of electromagnetic engineering and science
• /
• 제17권1호
• /
• pp.1-8
• /
• 2017

This paper introduces a technique to obtain the broadband characteristics of circularly polarized antennas using an L-shaped probe. A waveguide antenna is suitable for obtaining high gain and handling convenience in some applications; however, the asymmetrical structure of the L-shaped probe results in cross-polarization and frequency dependence on the field distribution of higher-order modes (HOM). In addition to the basic characteristics of a waveguide antenna with an L-shaped probe, the author discusses some techniques to reduce the HOM and cross-polarization. As a result, the 3-dB axial ratio (AR) is obtained with the fundamental mode even when the frequency is expanded to the region for HOM of TM. This reduction is mainly due to the cutoff structure to the TM mode around the short wall of the waveguide. Furthermore, some aperture modification techniques can reduce the cross-polarization in a wide range of angles in the radiation pattern. Such techniques and their mechanisms are discussed in this paper. The obtained performance shows that the proposed antennas have a wide range of angles of 3-dB AR in the radiation pattern, broadband characteristics in impedance and AR, and low variation in group velocity.

• 한국정보전자통신기술학회논문지
• /
• 제3권4호
• /
• pp.23-27
• /
• 2010

본 연구에서는 감성 평가 시스템 가장 적합한 파라미터를 찾기 위하여 3가지 뇌파 파라미터를 이용하여 감정 분류 실험을 하였다. 뇌파 파라미터는 선형예측기계수(linear predictor coefficients)와 FFT 스펙트럼 및 AR 스펙트럼의 밴드별 상호상관계수(cross-correlation coefficients)를 이용하였으며, 감정은 relaxation, joy, sadness, irritation으로 설정하였다. 뇌파 데이터는 대학의 연극동아리 학생 4명을 대상으로 수집하였으며, 전극 위치는 Fp1, Fp2, F3, F4, T3, T4, P3, P4, O1, O2를 사용하였다. 수집된 뇌파 데이터는 전처리를 거친 후 특징 파라미터를 추출하고 패턴 분류기로 사용된 신경회로망(neural network)에 입력하여 감정 분류를 하였다. 감정 분류실험 결과 선형예측기계수를 이용하는 것이 다른 2가지 보다 좋은 성능을 나타내었다.

• 응용통계연구
• /
• 제23권1호
• /
• pp.179-187
• /
• 2010

Miniature spectrometers can be applied for various purposes in wide areas. This paper shows how a wellmade spectrometer on-a-chip of a low performance and low-cost filter-array can be used for recognizing types of red wine. Light spectra are processed through a filter-array of a spectrometer after they have passed through the wine in the cuvettes. Without recovering the original target spectrum, pattern recognition methods are introduced to detect the types of wine. A wavelength cross-correlation turns out to be a good distance metric among spectra because it captures their simultaneous movements and it is affine invariant. Consequently, a well-designed spectrometer is reliability in terms of its repeatability.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1865-1867
• /
• 2007

We propse a novel corner detection algorithm for locating 2D Data Matrix barcode in an image. The proposed method accumulates weight for each cross point defined by every combination of edge points in the image, and detects the corner point of the barcode L-pattern by determining the location of the highest accumulated weight. By designing the weight considering the connectivity of two lines around the cross point, we were able to detect the corner of L-pattern even for the cases that the lines of L-patterns are short. In the experiments, the proposed method showed improved performance compared with the conventional Hough transform based method in terms of detectability and computation time.

• 한국분무공학회지
• /
• 제25권2호
• /
• pp.51-59
• /
• 2020

The purpose of this study is to propose and compare methods for measuring individual spray cone angles using spray cross-section images. In direct injection gasoline engines, it was believed that the distribution of air-fuel mixture in the combustion chamber directly affected combustion performance and emission formation. However, since gasoline direct injection (GDI) injectors have a small injection angle, interference between individual spray plumes occurs. Therefore, GDI injectors have only measured the spray angle of the entire spray. To overcome these limitations, three methods of indirectly measuring the spray cone angles of individual spray plume were presented and compared by forming sheet beams using Nd:YAG laser and acquiring spray cross-section images. Each method currently has advantages and disadvantages, and research to apply the method suitable for various GDI injectors needs to be continued.

• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.703-710
• /
• 2010

In this paper, an overload detecting algorithm for an excavator is presented. The proposed overload detecting algorithm is based on the time series analysis especially correlation function. The main purpose of this paper is to prevent damage or crack from the fatigue loaded on an excavator in advance. Generally, the larger data, the longer processing time, and the amount of the data used in this paper are also large, especially every sampling period, 1600 data are gathered and calculated. So this paper focuses on minimizing the number of required sensors by using the correlation function. From the cross correlation function, similar pattern sensors are eliminated and dissimilar pattern sensors are considered, and from the auto correlation function, the overload can be detected. To prove the efficiency of the proposed overload detecting algorithm, this paper shows the computer simulation results.

• Tribology and Lubricants
• /
• 제32권3호
• /
• pp.101-105
• /
• 2016

Trap effect of groove is evaluated in a lubricating system using computational fluid dynamics (CFD) analysis. The simulation is based on the standard k-ε turbulence model and the discrete phase model (DPM) using a commercial CFD code FLUENT. The simulation results are also capable of showing the particle trajectories in flow field. Computational domain is meshed using the GAMBIT pre-processor. The various grooves are applied in order to improve lubrication characteristics such as reduction of friction loss, increase in load carrying capacity, and trapping of the wear particles. Trap effect of groove is investigated with variations in cross-sectional shape and Reynolds number in this research. Various cross-sectional shapes of groove (rectangular, triangle, U shaped, trapezoid, elliptical shapes) are considered to evaluate the trap effect in simplified two-dimensional sliding bearing. The particles are assumed to steel, and defined a single particle injection condition in various positions. The “reflect” boundary condition for discrete phase is applied to the wall boundary, and the “escape” boundary condition to “pressure inlet” and “pressure outlet” conditions. The streamlines are compared with particles trajectories in the groove. From the results of numerical analysis in the study, it is found that the cross-sectional shapes favorable to the creation of vortex and small eddy current are effective in terms of particle trapping effect. Moreover, it is found that the Reynolds number has a strong influence on the pattern of vortex or small eddy current in the groove, and that the pattern of the vortex or small eddy current affects the trap effect of the groove.