• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1063-1066
• /
• 2008

최근 인터넷 사용자들의 역할이 일방적으로 제공되는 컨텐츠를 소비하는 소비자에서 컨텐츠를 창조하는 생산자로 변화하고 있으며, 이러한 경향의 한 형태로 인터넷 개인방송이 있다. 그러나, 기존 인터넷 개인방송은 시간과 공간의 제약이 존재하여 사용자들의 요구를 충분히 만족시키지 못하고 있다. 최근 모바일 단말기기와 모바일 인터넷 기술이 발달하면서 기존 시스템의 제약을 해소하고 사용자의 요구를 충족시킬 수 있을 것으로 기대된다. 본 논문에서는 WiBro (Wireless Broadband) 망을 이용한 리눅스 기반의 휴대형 개인방송 시스템을 제안한다. 또한, 계층간 최적화 기법(Cross-Layer Optimization)을 적용하여 네트워크 상태에 따라 제공되는 방송 서비스의 품질을 동적으로 조절하는 방안을 제시한다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.3
• /
• pp.175-183
• /
• 2008

In wireless sensor networks with ad hoc networking capability, sensor nodes are battery operated and are usually disposable once deployed. As a result, each sensor node senses and communicates with limited energy and, thus, energy efficiency has been studied as a key design factor which determines lifetime of a wireless sensor network, and it is more improved recently by using so-called cross-layer optimization technique. In this paper, we propose and implement a new energy saving mechanism that reduces energy consumption during data collection by controlling transmission power at sensor nodes and then measure its performance in terms of lifetime improvement for the wireless sensor network platform ZigbeX. When every sensor node transmits sensed data to its clusterhead, it controls its transmission power down to as low level as communication is possible, resulting in energy saving. Each sensor node controls its transmission power based on RSSI(Received Signal Strength Indicator) of the packet received from its clusterhead. In other words, the sensor node can save energy by controlling its transmission power down to an appropriate level that its clusterhead safely receives the packet it transmits. According to the repetitive experiment of the proposed scheme on the ZigbeX platform using the packet analyzer developed by us, it is observed that the network lifetime is prolonged by up to 21.9% by saying energy during the data collection occupying most amount of network traffic.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.2
• /
• pp.172-179
• /
• 2020

The impact of effective parameters on the electrodeposition rate optimization of Au-Cu alloy at high thicknesses on the silver substrate was investigated in the present study. After ensuring the formation of gold alloy deposits with the desired and standard percentage of gold with the cartage of 18K and other standard karats that should be observed in the manufacturing of the gold and jewelry artifacts, comparing the rate of gold-copper deposition by direct and pulsed current was done. The rate of deposition with pulse current was significantly higher than direct current. In this process, the duty cycle parameter was effectively optimized by the "one factor at a time" method to achieve maximum deposition rate. Particular parameters in this work were direct and pulse current densities, bath temperature, concentration of gold and cyanide ions in electrolyte, pH, agitation and wetting agent additive. Scanning electron microscopy (SEM) and surface chemical analysis system (EDS) were used to study the effect of deposition on the cross-sections of the formed layers. The results revealed that the Au-Cu alloy layer formed with concentrations of 6gr·L^-1 Au, 55gr·L^-1 Cu, 24 gr·L^-1 KCN and 1 ml·L^-1 Lauryl dimethyl amine oxide (LDAO) in the 0.6 mA·cm^-2 average current density and 30% duty cycle, had 0.841 ㎛·min^-1 Which was the highest deposition rate. The use of electrodeposition of pure and alloy gold thick layers as a production method can reduce the use of gold metal in the production of hallow gold artifacts, create sophisticated and unique models, and diversify production by maintaining standard karats, hardness, thickness and mechanical strength. This will not only make the process economical, it will also provide significant added value to the gold artifacts. By pulsating of currents and increasing the duty cycle means reducing the pulse off-time, and if the pulse off-time becomes too short, the electric double layer would not have sufficient growth time, and its thickness decreases. These results show the effect of pulsed current on increasing the electrodeposition rate of Au-Cu alloy confirming the previous studies on the effect of pulsed current on increasing the deposition rate of Au-Cu alloy.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.25-36
• /
• 2016

The goal of the SmartGrid is to maximize energy efficiency by exchanging bi-directional real-time power information with the help of ICT(Information and Communication Technology). In this paper, we propose a "JRS-MS" (Joint Routing and Scheduling for Multi-channel SmartGrid) algorithm that uses numerical modeling methods in IEEE 802.11s based STDMA multi-channel SmartGrid NAN networks. The proposed algorithm controls the amount of data transmission adaptively at the link layer and finds a high data-rate path which has the least interference between traffic flows in multi-channel SmartGrid NAN networks. The proposed algorithm improve transmission performance by enhancing network utilization. By comparing the results of performance analysis between the proposed algorithm and the JRS-SG algorithm in the previous paper, we showed that the JRS-MS algorithm can improve transmission performance by maximally utilizing given network resources when the number of flows are increasing in the multi-hop NAN wireless mesh networks.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.18-24
• /
• 2013

Network coding has been extensively studied to increase the network throughput by exploiting the broadcast and overhearing capabilities. In this paper, we formulate a network utility maximization problem to improve the network utility in multichannel, multiradio and multisession wireless multihop network with intrasession network coding. To find the solution of this problem, we propose a congestion control, distributed rate control, and heuristic resource allocation algorithm. We find the network utility and evaluate the performance in multichannel, multiradio and multisession environment by using MATLAB. Finally, the results show that the proposed schemes can achieve throughput improvement by performing the network utility optimization in wireless multihop network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.2233-2252
• /
• 2018

For the problem of cross-layer joint resource allocation (JRA) in the Long-Term Evolution (LTE)-Advanced standard using carrier aggregation (CA) technology, it is difficult to obtain the optimal resource allocation scheme. This paper proposes a joint resource allocation algorithm based on the weights of user's average quality of experience (JRA-WQOE). In contrast to prevalent algorithms, the proposed method can satisfy the carrier aggregation abilities of different users and consider user fairness. An optimization model is established by considering the user quality of experience (QoE) with the aim of maximizing the total user rate. In this model, user QoE is quantified by the mean opinion score (MOS) model, where the average MOS value of users is defined as the weight factor of the optimization model. The JRA-WQOE algorithm consists of the iteration of two algorithms, a component carrier (CC) and resource block (RB) allocation algorithm called DABC-CCRBA and a subgradient power allocation algorithm called SPA. The former is used to dynamically allocate CC and RB for users with different carrier aggregation capacities, and the latter, which is based on the Lagrangian dual method, is used to optimize the power allocation process. Simulation results showed that the proposed JRA-WQOE algorithm has low computational complexity and fast convergence. Compared with existing algorithms, it affords obvious advantages such as improving the average throughput and fairness to users. With varying numbers of users and signal-to-noise ratios (SNRs), the proposed algorithm achieved higher average QoE values than prevalent algorithms.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.01a
• /
• pp.147-150
• /
• 2017

지능형 로봇의 사용자 품질을 결정하는 주요 요소들 중 하나는 짧은 부트 시간이다. 로봇 시스템에서는 부팅 과정 중에 침입자인지, 자택 순찰, 개인 비서, 엔터테인먼트와 같은 다수의 응용들이 동시에 초기화되는데, 고품질의 사용자 경험을 제공하기 위해서는 사용자 응답성이 중요한 응용들이 우선적으로 초기화되어야한다. 이를 위해 리눅스 기반 로봇 시스템에서 부트 시간을 단축하기 위한 다양한 연구들이 진행되어 왔다. 하지만 이들은 단일 응용 각각에 대한 초기화 시간을 단축하는 연구들이며, 응용들 간에 CPU, 메모리, I/O와 같은 자원 경쟁에 의한 지연 요소를 고려하지 않고 있다. 본 논문에서는 응용들 간의 각종 자원경쟁들을 고려하여 사용자 응답성이 중요한 응용을 우선적으로 초기화하기 위한 외부 컨텍스트 기반 선별적 자원 사용률 조정기법을 제안한다. 이를 리눅스 기반 시스템 상에 구현하여 검증한 결과 응용의 부트 시간이 기존 대비 33.02% 단축됨을 확인했다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.248-255
• /
• 2008

In an OFDMA system the performance of multi-user scheduling in the frequency domain is affected by the frequency selectivity of the channel. If the channel is too flat in the frequency domain, the multi-user scheduling gain might be degraded. On the contrary, if the frequency selectivity is too high and the magnitude of the frequency response severely fluctuates on the allocation bandwidth, it is also hard to get sufficient scheduling gain. For maximizing the multi-user scheduling gain, a cyclic delay diversity technique can be used to adjust the frequency selectivity of the channel. This paper proposes a method to determine the optimal delay value of cyclic delay diversity according to the allocation bandwidth and the channel characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11B
• /
• pp.968-980
• /
• 2008

Providing handover with guaranteed QoS for real-time multimedia service such as VoIP, video/audio streaming, and video conferencing in wireless LAN is a challenging task. In this paper, we present efficient layer 2 handover mechanism in wireless LAN, which can provide fast handover with guaranteed QoS for real-time multimedia service. To this end, the scanning period and the number of channels per scanning for handover are dynamically adapted to the type of applications and wireless networking environment, so that both the degradation of application service quality and signaling overhead are minimized simultaneously. The performance of the proposed mechanism is verified by the simulation. The simulation results show that the proposed mechanism guarantess QoS of each multimedia application with minimal power consumption.

• Membrane Journal
• /
• v.14 no.1
• /
• pp.57-65
• /
• 2004

The effect of porous support layer resistance and PDMS (polydimethylsiloxane) coating thickness on ethylene/nitrogen separation of composite membranes was studied with the model of Pinnau and Wijmans〔1〕. To control the support resistance (or permeance), PES porous membranes were prepared by phase inversion process with various PES/NMP dope concentrations. The thickness of selective PDMS top layer was controlled by using a spin coater. Its cross-section and coating thickness were observed by scanning electron microscope (SEM). Pure gas permeation test was done with ethylene and nitrogen, respectively. The experimental result for olefin/nitrogen separation process matched well with theoretical result from the model used. The result shows that optimization between PDMS coating thickness and support resistance is important to get PDMS composite membranes with best performance.