• 한국통신학회논문지
• /
• 제31권9A호
• /
• pp.856-867
• /
• 2006

This paper proposes a new algorithm for opportunistic scheduling that take advantage of both multiuser diversity and power control. Motivated by the multicast RTS and priority-based CTS mechanism of OSMA protocol, we propose an opportunistic packet scheduling with power control scheme based on IEEE 802.11 MAC protocol. The scheduling scheme chooses the best candidate receiver for transmission by considering the SINR at the nodes. This mechanism ensures that the transmission would be successful. The power control algorithm on the other hand, helps reduce interference between links and could maximize spatial reuse of the bandwidth. We then formulate a convex optimization problem for minimizing power consumption and maximizing net utility of the system. We showed that if a transmission power vector satisfying the maximum transmission power and SINR constraints of all nodes exist, then there exists an optimal solution that minimizes overall transmission power and maximizes utility of the system.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(D)
• /
• pp.297-299
• /
• 2012

In this paper, we introduce a joint flow control and scheduling algorithm for multi-hop cognitive radio networks with spectrum underlay. Our proposed algorithm maximizes the total utility of secondary users while stabilizing the cognitive radio network and still satisfies the total interference from secondary users to primary network is less than an accepted level. Based on Lyapunov optimization technique, we show that our scheme is arbitrarily close to the optimal.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.247-248
• /
• 2008

A recent dynamic increase in demand for wireless multimedia services has greatly accelerated the research on dynamic channel adaptation of high quality video applications. In this paper, we explore a theoretical approach to cross-layer optimization between multimedia and wireless networks by means of a quality criterion termed "visual throughput" for downlink video transmission using a layered coding algorithm. We obtain the optimal loading ratio of orthogonal frequency division multiple access (OFDMA) subcarriers through an optimization problem balancing the trade-off relationship between inter-cell interference (ICI) and channel throughput. In the simulation, we show that the visual throughput gain at the cell boundary is increased by about 32%.

• 한국통신학회논문지
• /
• 제32권10A호
• /
• pp.1023-1033
• /
• 2007

This study considers a joint congestion control, routing and power control for energy-constrained wireless networks. A mathematical model is introduced which includes maximization of network utility, maximization of network lifetime, and trade-off between network utility and network lifetime. The framework would maximize the overall throughput of the network where the overall throughput depends on the data flow rates which in turn is dependent on the link capacities. The link capacity on the other hand is a function of transmit power levels and link Signal-to-Interference-plus-Noise-Ratio (SINR) which makes the power allocation problem inherently difficult to solve. Using dual decomposition techniques, subgradient method, and logarithmic transformations, a joint algorithm for rate and power allocation problems was formulated. Numerical examples for each optimization problem were also provided.

• Geomechanics and Engineering
• /
• 제34권1호
• /
• pp.29-41
• /
• 2023

The 3D geospatial modeling of geotechnical information can aid in understanding the geotechnical characteristic values of the continuous subsurface at construction sites. In this study, a geostatistical optimization model for the three-dimensional (3D) mapping of subsurface stratification and the SPT-N value based on a trial-and-error rule was developed and applied to a dam emergency spillway site in South Korea. Geospatial database development for a geotechnical investigation, reconstitution of the target grid volume, and detection of outliers in the borehole dataset were implemented prior to the 3D modeling. For the site-specific subsurface stratification of the engineering geo-layer, we developed an integration method for the borehole and geophysical survey datasets based on the geostatistical optimization procedure of ordinary kriging and sequential Gaussian simulation (SGS) by comparing their cross-validation-based prediction residuals. We also developed an optimization technique based on SGS for estimating the 3D geometry of the SPT-N value. This method involves quantitatively testing the reliability of SGS and selecting the realizations with a high estimation accuracy. Boring tests were performed for validation, and the proposed method yielded more accurate prediction results and reproduced the spatial distribution of geotechnical information more effectively than the conventional geostatistical approach.

• Earthquakes and Structures
• /
• 제23권4호
• /
• pp.363-371
• /
• 2022

Traditional metal dampers have disadvantages such as a higher yield point and inadequate adjustability. The experimental results show that the low yield point steel has superior energy dissipation hysteretic capacity and can be applied to seismic structures. To overcome these deficiencies, a novel compound metal damper comprising both low yield point steel plates and common steel plates is presented. The optimization objectives, including "maximum rigidity" and "full stress state", are proposed to obtain the optimal edge shape of a compound metal damper. The numerical results show that the optimized composite metal damper has the advantages such as full hysteresis curve, uniform stress distribution, more sufficient energy consumption, and it can adjust the yield strength of the damper according to the engineering requirements. In view of the mechanical characteristics of the compound metal damper, the equivalent model of eccentric cross bracing is established, and the approximate analytical solution of the yield strength and the yield displacement is proposed. A nonlinear simulation analysis is carried out for the overall aseismic capacity of three-layer-frame structures with a compound metal damper. It is verified that a compound metal damper has better energy dissipation capacity and superior seismic performance, especially for a damper with double-objective optimized shape.

• 한국항공우주학회지
• /
• 제41권4호
• /
• pp.268-274
• /
• 2013

항공기 날개 앞전의 레이더흡수구조 최적화를 위한 목적함수를 정의하였으며, 유전체로 구성된 단층형 레이더흡수구조를 설계하였다. 설계변수는 흡수체의 복소유전율이며 반사계수와 레이더반사면적을 각각 목적함수로 사용하였다. 반사계수는 계산이 간단하여 최적화에 효과적으로 사용될 수 있지만 대상물을 평판형태로 가정하기 때문에 구조물의 형상을 충분히 반영하기 어렵다. 반면 레이더반사면적은 형상을 충분히 반영할 수 있지만 계산에 많은 시간이 요구된다. 반사계수는 전송선로이론을 통하여 계산하였으며, 레이더반사면적은 형상조건을 반영하기 위하여 날개 앞전 부분모델에 대해 물리광학법을 사용하여 평가하였다. 최적설계는 유전자알고리즘을 사용하였고, 설계된 레이더흡수구조를 날개 앞전에 적용하여 레이더반사면적을 계산함으로써 레이더흡수 성능을 확인하였다.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.21-27
• /
• 2013

The present study explored the way to desalinate seawater for agricultural irrigation using forward osmosis (FO) process using liquid fertilizer as draw solution. FO experiments were performed in a cross flow mode using flat sheet FO membrane. The effect of membrane orientation, flow rate, and draw solution concentration on the performance of forward osmosis was investigated by measuring water flux of forward osmosis membrane. The water flux when the draw solution was placed against the membrane active layer was lower than the water flux when the feed solution was placed against the membrane active layer. This results indicated that the decrease of effective osmotic pressure by dilutive internal concentration polarization was less than that by concentrative internal concentration polarization. Increasing flow rate from 66.7 to 133.1 $cm^3$/min resulted in increase of the water flux when the membrane active layer orient to draw solution and feed solution, respectively. The reduction of resistance to water flow increased water flux at higher flow rate. The water flux of FO membrane increased with increasing draw solution concentration from 10000 to 30000 mg/L. The water flux for $KH_2PO_4$ draw solution was similar to that for commercial fertilizer. Optimization of FO process would contribute to economically desalinate brackish water for agricultural use.

• Structural Engineering and Mechanics
• /
• 제74권4호
• /
• pp.533-545
• /
• 2020

An optimal design method for a spoke double-layer cable-net structure (SDLC) is proposed in this study. Simplified calculation models of the SDLC are put forward to reveal the static responses under vertical loads and wind loads. Next, based on an energy principle, the relationship among the initial prestress level, cross-sectional areas of the components, rise height, sag height, overall displacement, and relative deformation is proposed. Moreover, a calculation model of the Foshan Center SDLC is built and optimized. Given the limited loading cases, material properties of the components, and variation ranges of the rise height and sag height, the self-weight and initial prestress level of the entire structure can be obtained. Because the self-weight of the cables decreases with increasing of the rise height and sag height, while the self-weight of the inner strut increases, the total weight of the entire structure successively exhibits a sharp reduction, a gradual decrease, a slow increase, and a sharp increase during the optimization process. For the simplified model, the optimal design corresponds to the combination of rise height and sag height that results in an appropriate prestress level of the entire structure with the minimum total weight.

• 한국정보과학회논문지:정보통신
• /
• 제36권4호
• /
• pp.351-359
• /
• 2009

CDMA2000 1xEV-DO 이동통신 시스템에서 주문형 비디오 서비스를 고품질로 제공하면서도 합리적 수준의 시스템 성능을 제공하는 무선 MAC 스케줄러를 재안한다. 제안하는 스케줄러는 응용 계층에 존재하는 비디오 데이터 정보를 MAC 계층에 존재하는 스케줄러가 활용하여 주문형 비디오 서비스의 품질이 개선되도록 한다. 우리는 시뮬레이션 실험을 통해서 제안하는 방식이 이전에 제안된 비디오 트레이스 방식과 비교 했을 때 VBR(Variable-Bit-Rate) 비디오의 비디오 프레임 변화가 클수록 더 뛰어난 품질과 성능을 제공함을 보인다.