• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.5
• /
• pp.13-20
• /
• 2020

The effect of the relative distance between two cavity flame holders on the performance of a supersonic combustor was experimentally investigated. A rectangular cross-sectional combustor model with one cavity flame holder on each of two facing walls was used, with two difference distances between cavities of 135 mm and 220 mm. The fuel equivalence ratio was varied as 0.16 and 0.38. A direct-connected type test facility was used to provide Mach 2 flow condition. The test results revealed that the combustion pressure was higher for the shorter cavity distance case. But fuel equivalence ratio did not have large effect on the combustion pressure. It was concluded that, to get higher combustor pressure, there needs to be further combustor configuration change such as smaller cavity distance or tandem cavity installation.

• Journal of dental hygiene science
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2021

Background: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is transmitted primarily through droplets, and dental practitioners are at risk of occupational exposure to SARS-CoV-2 infection owing to direct contact with the patient's mouth, aerosols from dental procedures, and saliva. Wearing a mask is believed to be the best method of protection against infection, and a systematic literature review was conducted on whether the dental masks used in dentistry are effective in preventing Coronavirus Infectious Disease-19 (COVID-19). Methods: We used PubMed, Google Scholar, DBpia, NDSL, and KISS databases for this study. Of the 917 documents narrowed down by the search terms "Coronavirus, COVID-19, and dental," 83 documents were collected and studied. Ultimately, 42 of these papers were selected for analysis after considering duplication from the flow chart of the literature selection process. Results: While dental masks are often used when treating patients with unknown COVID-19 status, the Ministry of Food and Drug Safety stated that the use of dental masks is insufficient in preventing cross-transmission of COVID-19; instead, it was recommended that N95 masks, which correspond to KF94 masks, should be worn daily. On the other hand, wearing a dental mask and following precautions such as hand hygiene may not pose a significantly higher risk of infection than wearing an N95 mask when treating COVID-19 patients. Conclusion: There is an ongoing discussion regarding the use of dental masks when treating dental patients, and many argue that different types of masks should be selected according to the degree of infection and the individual's respiratory condition. By considering the safety and efficacy of dental masks in preventing infection, improvements can be made in the management of COVID-19 and dental-related infections.

• The Journal of Internal Korean Medicine
• /
• v.43 no.3
• /
• pp.375-386
• /
• 2022

Objectives: The purpose of this study was to summarize current clinical study trends and results regarding transcutaneous electrical nerve stimulation (TENS) treatment for xerostomia. Methods: Studies published from 2017 to 2022 were searched on domestic databases and PubMed. The included studies were analyzed according to the year, language, study design, diagnosis xerostomia method, and TENS treatment method. Results: Nine studies were included. There were three randomized controlled trials (RCTs), three case series, one case report, one case-control study, and one cross-sectional study. Conventional TENS was used in seven studies, and acupuncture-like TENS (ALTENS) was used in one study. The most common TENS attachment site was externally on the skin overlying the parotid gland region, and the setting of TENS was 50 Hz-250 μs the most. In all nine studies, TENS was effective for xerostomia as assessed by salivary flow rate or quality of life questionnaire. Additionally, no persistent adverse events were reported after TENS treatment. Conclusions: TENS treatment for xerostomia can be considered effective and safe, so it can be used in clinical practice.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.6
• /
• pp.540-545
• /
• 2021

A transverse fracture is the most common type of displaced patella fracture requiring surgery. These fractures are commonly fixed with parallel Kirschner wires or screws that cross the fracture line, often with an additional tension band. Nevertheless, conventional fixation methods of patella fractures have prevalent complications caused by the protrusion of wires or pins. These complications necessitate additional surgery for hardware removal, increase medical cost, and can limit the function of the knee joint. This paper reports cases treated with a minimally invasive load-sharing percutaneous suture of the patella tendon. The procedure provides reliable fixation for transverse patella fractures, minimizes soft tissue injuries, preserves blood flow, and reduces postoperative pain. In addition, the procedure also reduces the irritation and pain caused by the internal fixture, thereby reducing the risk of restricted knee joint movement.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.17-23
• /
• 2023

In this study, the thermoluminescence kinetics of electron trap in Li₆Y_0.5Gd_0.5(BO₃)₃ (LY_0.5G_0.5BO) scintillator for neutron detection composed of Li, Gd, and B with a high neutron response cross-section were investigated. The thermoluminescence glow curve of the LY_0.5G_0.5BO scintillation single crystal was measured and analyzed using the peak shape method, the initial rise method, and the machine learning algorithm to evaluate the physical parameters of the electron trap. The glow curve of the LY_0.5G_0.5BO scintillation single crystal consisted of a single peak. As a result of analyzing this peak, the activation energy, emission order, and frequency factor of the electron trap were 0.61 eV, 1.1, and 1.7×10⁷ s^-1, respectively. In addition, the possibility of thermoluminescence analysis of scintillators using machine learning was confirmed.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.101-104
• /
• 2022

Mist-CVD is known to have advantages of low cost and high productivity compared to ALD and PECVD methods. It is capable of reacting to the substrate by misting an aqueous solution using ultrasonic waves under vacuum-free conditions of atmospheric pressure. In particular, Ga₂O₃ is regarded as advanced power semiconductor material because of its high quality of transmittance, and excellent electrical conductivity through N-type doping. In this study, Computational Fluid Dynamics were used to predict the uniformity of the thin film on a large-area substrate. And also the deposition pattern and uniformity were analyzed using the flow velocity and particle tracking method. The uniformity was confirmed by quantifying the deposition cross section with an FIB-SEM, and the consistency of the uniformity prediction was secured through the analysis of the CFD distribution. With the analysis and experimental results, the match rate of deposition area was 80.14% and the match rate of deposition thickness was 55.32%. As the experimental and analysis results were consistent, it was confirmed that it is possible to predict the deposition thickness uniformity of Mist-CVD.

• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.219-225
• /
• 2009

The primary purpose of this study is to build computer models referring overall flow of complex and various semiconductor wafer manufacturing process and to implement a educational model which operates with a presentation tool showing device design. It is important that Korean semiconductor industries secure high competitive power on efficient manufacturing management and to develop technology continuously. Models representing the FAB processes and the functions of each process are developed for Seoul National University Semiconductor Research Center. However, it is expected that the models are effective as visually educational tools in Korean semiconductor industries. In addition, it is anticipated that these models are useful for semiconductor process courses in academia. Scalability and flexibility allow semiconductor manufacturers to customize the models and perform simulation education. Subsequently, manufacturers save budget.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.3
• /
• pp.916-937
• /
• 2023

Most of the existing Distributed Denial-of-Service mitigation schemes in Software-Defined Networking are only implemented in the network domain managed by a single controller. In fact, the zombies for attackers to launch large-scale DDoS attacks are actually not in the same network domain. Therefore, abnormal traffic of DDoS attack will affect multiple paths and network domains. A single defense method is difficult to deal with large-scale DDoS attacks. The cooperative defense of multiple domains becomes an important means to effectively solve cross-domain DDoS attacks. We propose an efficient multi-domain DDoS cooperative defense mechanism by integrating blockchain and SDN architecture. It includes attack traceability, inter-domain information sharing and attack mitigation. In order to reduce the length of the marking path and shorten the traceability time, we propose an AS-level packet traceability method called ASPM. We propose an information sharing method across multiple domains based on blockchain and smart contract. It effectively solves the impact of DDoS illegal traffic on multiple domains. According to the traceability results, we designed a DDoS attack mitigation method by replacing the ACL list with the IP address black/gray list. The experimental results show that our ASPM traceability method requires less data packets, high traceability precision and low overhead. And blockchain-based inter-domain sharing scheme has low cost, high scalability and high security. Attack mitigation measures can prevent illegal data flow in a timely and efficient manner.

• Journal of Leisure Studies
• /
• v.10 no.1
• /
• pp.1-27
• /
• 2012

According as the number of immigrants has dramatically increased since last 10years, immigrants' acculturation has become a matter of great importance to Korean society. This study reviews theories on acculturation in leisure studies, specifically marginality vs ethnicity theory, assimilation theory and it's extended models, Berry's box and it's extended models, and cross-cultural vs cultural perspectives on acculturation research. Moreover, It also examines domestic research trend for some aspects such as the number of publishing articles a year, major issues and theories applied to domestic studies, methodology and employees. Finally, some kinds of suggestion for domestic studies in the near future are discussed.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.1
• /
• pp.101-112
• /
• 2011

Coastal terrace was developed at 7.2m height near Shinchon village in Geoje Island. It is located on the east side of southern coast in Korean Peninsula, where sea-level changes caused by ebb and flow of the tide, embayment are relatively low. Due to the breccia layer by mass-movement, dark grayish clayey formation, marine origin's rounded gravel are deposited sequentially in a cross-section of coastal terrace, so it provides a good example which understand Holocene sea level changes to determine the effect on the various sedimentary environments. For the purpose of identifying the morphogenetic process, Grain size, Roundness, XRD, AMS dating analysis was attempted. As a result, after last glacial age, Holocene sea level rise to +5.6m(4,740±100yrs BP). At that time, various geomorphological features are considered to be formed.