• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.31-35
• /
• 2014

The upper critical field ($H_{c2}$) was determined by applying a magnetic field along the ab plane and c axis for two single crystals of $BaFe_{2-x}Ru_xAs_2$ (x=0.48 and 0.75). The anisotropy of the $H_{c2}(0)$, ${\gamma}(0)=H_{c2}{^{ab}}(0)/H_{c2}{^c}(0)$, was ~1.6 for x=0.48 and ~2.3 for x=0.75. The angle-dependent resistance measured below $T_c$ allowed perfect scaling features based on anisotropic Ginzburg-Landau theory, leading to consistent anisotropy values. Because only one fitting parameter ${\gamma}$ is used in the scaling for each temperature, the validity of the ${\gamma}$ value was compared with that determined from ${\gamma}=H_{c2}{^{ab}}/H_{c2}{^c}$. The ${\gamma}$ obtained at a temperature close to $T_c$ was 3.0 and decreased to 2.0 at low temperatures. Comparing to the anisotropy determined for electron- or hole-doped $BaFe_2As_2$ using the same method, the present results point to consistent anisotropy in Ru-doped $BaFe_2As_2$ with other electron- or hole-doped $BaFe_2As_2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.470-473
• /
• 2002

In order to get proper original suspension for the electrophoresis process of making YBaCuO films, YBaCuO superconductor powder was prepared with the Sol-gel method. The composition of the powder was analyzed by X-ray diffraction, which was identified as YBa$_2$Cu$_3$O$\sub$7-x/(Yl23) phase. The form of YBaCuO single particle was showed to be spherical by scanning electronic microscope and its size was among 0.2-1 $\mu\textrm{m}$. The critical transition temperature (T$\sub$c/) and the critical current density (J$\sub$c/) were measured with the four-probe, method. The T$\sub$c/ was about 91 K, and the J$\sub$c/ was 5-30 A/$\textrm{cm}^2$.

• 한국재료학회지
• /
• 제9권8호
• /
• pp.849-853
• /
• 1999

본 연구에서는 액상성장법(LPE법)으로 $Bi_2$-x(sub)$LSr_2$Ca(sub)1+x(sub)$LCu_2$O(sub)8+d (x(sub)L=0, 0.05, 0.1, 0.2) 막(film)을 작성하여 초전도특성을 알아보았고, XPS 측정으로 얻은 Sr3d과 Ca2p의 피크분해 결과와 EPMA 측정 결과를 통하여 각 layer에 있어서 원자들의 분포상태에 관하여 조사하였다. 작성한 막(film)의 c-축의 길이는 x(sub)L(융해조성비)의 증가에 따라 단조로이 증가하였고, 임계온도 T(sub)c는 x(sub)L=0.1 부근에서 최고치를 나타내고 있었다. x(sub)L의 변화에 따른 임계온도 T(sub)c와 c-축의 길이의 변화는 BiO-layer에 있는 과잉산소의 변화에 의한 것이며, SrO-layer에서 원소들의 분포상태와 결손이 초전도특성 및 결정구조에 영향을 미치고 있음을 알 수 있었다.

• Progress in Superconductivity
• /
• 제11권2호
• /
• pp.87-91
• /
• 2010

We fabricated the polyacrylic acid (PAA)-doped $MgB_2$ bulks and characterized their lattice parameters, actual C substitutions, microstructures, and critical properties. The boron (B) powder was mixed with PAA using N,N-dimethylformamide as solvent and then the solution was dried out at $200^{\circ}C$ and crushed. The C treated B powder and magnesium powder were mixed and compacted by uniaxial pressing at 500 MPa, followed by sintering at $900^{\circ}C$ for 1 h in high purity Ar atmosphere. We observed that the PAA doping increased the MgO amount but decreased the grain size, a-axis lattice constant, and critical temperature ($T_c$), which is indicative of the C substitution for B sites in $MgB_2$. In addition, the critical current density ($J_c$) at high magnetic field was significantly improved with increasing PAA addition: at 5 K and 6.6 T, the $J_c$ of 7 wt% PAA-doped sample was $6.39\;{\times}\;10^3\;A/cm^2$ which was approximately 6-fold higher than that of the pure sample ($1.04\;{\times}\;10^3\;A/cm^2$). This improvement was probably due to the C substitution and the refinement of grain size by PAA doping, suggesting that PAA is an effective dopant in improving $J_c$(B) performance of $MgB_2$.

• 한국분말재료학회지
• /
• 제19권2호
• /
• pp.146-150
• /
• 2012

The effects of nano $Fe_xC$ addition to superconducting properties of $in$ $situ$ processed $MgB_2$ superconductors was examined. 0.1 wt.% and 1 wt.% nano $Fe_xC$ powders were mixed with boron and magnesium powders by ball milling. The powder mixtures were made into pellets by uniaxial pressing. The pellets were heat-treated at $700^{\circ}C-900^{\circ}C$ in argon atmosphere for $MgB_2$ formation. It was found by powder X-ray diffraction that the raw powders were completely converted into $MgB_2$ after the heat treatment. The superconducting transition temperature ($T_c$) and critical current density ($J_c$), estimated from susceptibility-temperature and $M-H$ curves, were decreased by nano $Fe_xC$ addition. The $T_c$ and $J_c$ decrease by nano $Fe_xC$ addition are attributed to the incorporation of iron and carbon with $MgB_2$ lattices (Fe substitution for Mg and C substitution for B) due to the high reactivity of the nano $Fe_xC$ powder.

• Journal of Plant Biology
• /
• 제37권1호
• /
• pp.37-42
• /
• 1994

Correlative changes between photosynthetic O2 exchange rates and room temperature Chl fluorescence were investigated in wheat (Triticum aestivum L.) chloroplasts treated with high temperature for 5 min. With increasing treatment temperature, photosynthetic O2 evolution rate mediated by PSII was decreased, showing 50% inhibition at 38$^{\circ}C$ (I50). But PSI activity measured by O2 uptake rates was stimulated as a function of increasing temperature. Dark level fluorescence (Fo)-temperature (T) analysis showed that fluorescence rising temperature (Tr), critical temperature (Tc), and peak temperature (Tp) was 38, 43, and 52$^{\circ}C$, respectively. Quenching analysis of Chl fluorescence showed that both the oxidized fraction of plastoquinone (qQ) and degree of thylakoid membrane energization (qNP) increased up to 4$0^{\circ}C$ and then declined dramatically. These results suggest that Tr is correlated with temperature showing a 50% of inhibition of photosynthesis and under mild high temperature stress, qNP is worth regarding as indicator for heat-induced damage of photosynthesis.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2004년도 High Temperature Superconductivity Vol.XIV
• /
• pp.95-95
• /
• 2004

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.349-352
• /
• 2004

The improvement of critical temperature $(T_c)$, critical magnetic field $(H_c)$, and critical current density $(J_c)$ of superconductor is important for practical applications. In this study, the additives such as metal oxides were used to improve the preparation conditions of $YBa_2Cu_3O_x$ superconducting bulk samples and depending on additives the properties of $YBa_2Cu_3O_x$ superconductor were studied. The effects of additives to the density, grain alignment, and porosity of samples that affect the critical current density of superconductor also have been investigated.

• 한국재료학회지
• /
• 제5권5호
• /
• pp.598-605
• /
• 1995

Thin films of $YB_{2}Cu_{3}O_{7-d}$ were prepared on various substrated of MgO(100), $SrTiO_{3}$, and $LaAlO_{3}$ by using off-axis magentron sputtering methods and annealing in-situ. The prarameters of film fabrication processes had been optimized through a "follow the lcoal maxima" strategy to yield good quality films in therms of the critical temperature $T_{c}$ and the critical current density $J_{c}$. Optimizedproecsses employing a plane magndtron and an cylindrical magnetron yielded $T_{c}$>90K along with $J_{c}$$10^{6}$A/$\textrm{cm}^2$ at 77K and > 2${\times}$$10^{7}$A/$\textrm{cm}^2$ at 5K. The sampels, however, showed degradationinthe properties, after chemical etching for fabrication of microbridges with the line width of 2-10 mocrons. In particular, the value of $T_{c}$ for the microbridges of 2microns was as small as 80%. The degradation was strongly dependent on the line width through a formula : $T_{c}$(e)=$T_{c}$)b) [1-a exp(-1000 bL)} where $T_{c}$(e) and $T_{c}$ (b) are the values of $T_{c}$ in the absolute scale measured after and before chemical etching, respectively and L is the line width in mm. By utilizing a best fitting technique, the proper constant values of a and to b were found as exp(-1.2) and 0.22, respectively. This formula was very useful in estimatiing the upper limit of the device operationtemperature.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2860-2870
• /
• 1994

When crack are detected in aged turbine rotors of power plants, information on fracture resistance of the aged material at operating temperature is needed for determination of critical loading condition and residual life of the turbine. In this study, fracture toughness (J$_lc$) and tearing modulus(T$_mat$) of virgin and thermally degraded 1Cr-1Mo-0.25V steel, which is one of the most widely used rotor steels, were measured at 538.deg. C according to ASTM E813 and ASTM E1152, respectively. Five kinds of specimen with different degradation levels were prepared by isothermal aging heat treatment at $630^{\circ}C.$ It was observed that J$_lc$ and T$_mat$ value decreased as the degradation level increased. Analysis of microstructures using a scanning electron microscope showed that the decrement of J$_lc$ is related to segregation of impurities at grain boundaries. It was also verified that the DC electric potential drop method is accurate and reliable for crack length monitoring at elevated temperature.