• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.61-75
• /
• 2003

한계상태 토질역학을 사질토의 전단거동에 대한 적용을 용이하게 하기 위해서, 표준삼축 시험으로부터 사질토에서의 한계상태정수 결정에 관하여 종합적인 고찰을 실시하였다. 첫째로, 문헌에 있는 어휘론적인 차이점들을 명확히 함으로써, 한계상태는 대변형에서의 궁극적인 최종상태를 나타냄을 추론하였다. 둘째로, 한계상태정수의 특성들에 관하여 검토하였고, 초기상태, 구주 하중조건 및 배수조건에 따른 한계상태선의 유일성과 유사한계상태조건의 민감성을 검증하였다. 셋째로, 한계상태정수로부터 액상화후 전단강도 즉 액상화된 흙에서의 신뢰할 수 있는 궁극적인 전단강도를 산정하기 위하여 한계상태 토질역학을 예제로서 적용하였다.

• 대한수학회지
• /
• 제58권3호
• /
• pp.723-740
• /
• 2021

Design and maintenance of large span roof structures require an analysis of their static and dynamic behavior depending on the physical parameters defining the structures. Therefore, it is highly desirable to estimate the parameters from observations of the system. In this paper we study the parameter estimation problem for damped shallow arches. We discuss both symmetric and non-symmetric shapes and loads, and provide theoretical and numerical studies of the model behavior. Our study of the behavior of such structures shows that it is greatly affected by the existence of critical parameters. A small change in such parameters causes a significant change in the model behavior. The presence of the critical parameters makes it challenging to obtain good estimation. We overcome this difficulty by presenting the Parameter Estimation Algorithm that identifies the unknown parameters sequentially. It is shown numerically that the algorithm achieves a successful parameter estimation for models defined by arbitrary parameters, including the critical ones.

• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.246-255
• /
• 1998

This paper presents a novel method for real-time malfunction detection of plasma etching process using EPD signal traces. First, many reference EPD signal traces are collected using monochromator and data acquisition system in normal etching processes. Critical points are defined by applying differentiation and zero-crossing method to the collected reference signal traces. Critical parameters such as intensity, slope, time, peak, overshoot, etc., determined by critical points, and frame attributes transformed signal-to symbol of reference signal traces are saved. Also, UCL(Upper Control Limit) and LCL(Lower Control Limit) are obtained by mean and standard deviation of critical parameters. Then, test EPD signal traces are collected in the actual processes, and frame attributes and critical parameters are obtained using the above mentioned method. Process malfunctions are detected in real-time by applying SPC(Statistical Process Control) method to critical parameters. the Real-time malfunction detection method presented in this paper was applied to actual processes and the results indicated that it was proved to be able to supplement disadvantages of existing quality control check inspecting or testing random-selected devices and detect process malfunctions correctly in real-time.

• 설비공학논문집
• /
• 제11권1호
• /
• pp.125-132
• /
• 1999

Studies are being done to replace conventional refrigerants with alternatives that have low or no ozone depletion and greenhouse warming Potentials, yet possess appropriate pro perties for a refrigeration cycle. To achieve this goal, a consistent set of thermodynamic properties of the working fluid is required. A common problem with the possible alternative refrigerants is that sufficient experimental data do not exist, thus making it difficult to develp complete equations of state that can predict properties in all regions including the vapor-liquid equilibrium. One solution is the use of the generalized equation of state correlations that can predict thermodynamic properties with a minimum number of characteristic parameters. Characteristic parameters required for the generalized equation of state are, in general, critical temperature, critical pressure, critical volume and normal boiling temperature. In this study, estimation of these characteristic parameters of refrigerants by group contribution method is developed.

• 한국임상수의학회지
• /
• 제22권3호
• /
• pp.198-201
• /
• 2005

이 연구의 목적은 BUN 및 혈청 creatining, total protein, albumin과 glucose의 장기간에 걸친 개체 내 변이를 산정하여, 각각의 critical difference를 구성하는 것이다. 임상적으로 건강한 20마리의 개에서 일주일에 한번씩 총 8주간 채혈하여, 장기간에 걸친 개체 내 변이를 구하고, critical difference를 산출하였다. BUN은 9.01 mg/dl, 혈청 creatining은 0.52 mg/dl, total protein은 0.99 g/dl, albumin은 0.39 g/dl, glucose는 20.64 mg/dl로 critical difference가 산출되었다. 동일한 개에서 연속적으로 측정된 검사항목 치가 critical value보다 차이가 적으면, 이 차이는 생리적인 변화에 기인한다고 할 수 있으며, critical value보다 차이가 크면, 다른 요인, 즉 질병의 진행이나 다른 동반된 질병의 존재를 의미한다고 할 수 있다.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.77-92
• /
• 2003

사질토에서의 한계상태정수 결정시 근본적인 물리적 과정들과 고유적 인 한계성들을 파악하기 위하여 일련의 표준삼축시험을 실시하였다. 시험결과에 의하면, 주어진 흙에 대하여 한계상태마찰각은 배수조건에 상관없이 일정한 반면에, e-log p＇공간상에서의 한계상태선은 주로 표준삼축시험에서 충분치 못하게 도달하는 변형률과 비배수시험에서의 변형률 국지화효과 때문에 배수조건에 따라 다른 결과를 보였다. 실내시험을 통하여 한계상태정수를 산정하는 최선의 방법은 균일하고 느슨하게 성형된 시료를 배수조건하에서 전단하는 것으로 나타났다. 더불어 배수시험에서 다일러턴 시효과나 변형률 국지화효과를 피할 수 있는 시험을 계획하기 위한 참고상태정수를 제시하였다.

• Journal of Magnetics
• /
• 제19권4호
• /
• pp.315-322
• /
• 2014

In this work, Artificial Neural Network (ANN) was used to model the dynamic behavior of ferromagnetic hysteresis derived from performing the mean-field analysis on the Ising model. The effect of field parameters and system structure (via coordination number) on dynamic critical points was elucidated. The Ising magnetization equation was drawn from mean-field picture where the steady hysteresis loops were extracted, and series of the dynamic critical points for constructing dynamic phase-diagram were depicted. From the dynamic critical points, the field parameters and the coordination number were treated as inputs whereas the dynamic critical temperature was considered as the output of the ANN. The input-output datasets were divided into training, validating and testing datasets. The number of neurons in hidden layer was varied in structuring ANN network with highest accuracy. The network was then used to predict dynamic critical points of the untrained input. The predicted and the targeted outputs were found to match well over an extensive range even for systems with different structures and field parameters. This therefore confirms the ANN capabilities and indicates the ANN ability in modeling the ferromagnetic dynamic hysteresis behavior for establishing the dynamic-phase-diagram.

• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.207-216
• /
• 2000

This paper introduces an effective system design method to develop a customer oriented product using a design optimization process and to select a set of critical design paramenters,. The process results in the development of a successful product satisfying customer needs and reducing development risk. The proposed scheme adopted a five step QFD(Quality Function Deployment) in order to extract design parameters from customer needs and evaluated their priority using risk factors for extracted design parameters. In this process we determine critical design parameters and allocate them to subsystem designers. Subsequently design engineers develop and test the product based on these parameters. These design parameters capture the characteristics of customer needs in terms of performance cost and schedule in the process of QFD, The subsequent risk management task ensures the minimum risk approach in the presence of design parameter uncertainty. An application of this approach was demonstrated in the development of weld quality monitoring system. Dominant design parameters affect linearity characteristics of weld defect feature vectors. Therefore it simplifies the algorithm for adopting pattern classification of feature vectors and improves the accuracy of recognition rate of weld defect and the real time response of the defect detection in the performance. Additionally the development cost decreases by using DSP board for low speed because of reducing CPU's load adopting algorithm in classifying weld defects. It also reduces the cost by using the single sensor to measure weld defects. Furthermore the synergy effect derived from the critical design parameters improves the detection rate of weld defects by 15% when compared with the implementation using the non-critical design parameters. It also result in 30% saving in development cost./ The overall results are close to 95% customer level showing the effectiveness of the proposed development approach.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.522-527
• /
• 1997

A total of 386 critical flow data points from 19 runs of 27 runs in the Marviken Test were selected and compared with the predictions by the correlations based on the critical flow scaling parameters. The results show that the critical mass flux in the very large diameter pipe can be also characterized by two scaling parameters such as discharge coefficient and dimensionless subcooling( $C_{d, ref}$ and $\Delta$ $T^{*}$$_{sub}$). The agreement between the measured data and the predictions are excellent.t.ons are excellent.t.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.255-266
• /
• 2017

In this study, self-supporting roofing elements especially convenient for large-span structures such as stadium, airport terminal, mall, coliseum, etc. were examined with respect to critical buckling load. These elements were assumed as laminated composite plates and, variation of free-edge forms, cutout types and lamination configurations were used as design parameters. Based on the architectural feature and structural requirements, the effects of curvilinear free-edge form on critical buckling load were focused on in this research. Within this scope, 14 types of lamination configuration were specified according to various orientation angle, number and thickness of plies with a constant value of total plate thickness. Besides that, 6 different types of cutout and 3 different free-edge forms were determined. By combining all these parameters 294 different critical buckling load analyses were performed by using ANSYS Mechanical software based on finite element method. Effects of those parameters on critical buckling load were evaluated referring to the obtained results. According to the results presented here, it may be concluded that lamination conditions have more significant influence on the critical buckling load values than the other parameters. On the other hand, it is perceived that curvilinear free-edge forms explicitly undergo changings depending on lamination conditions. For future work, existence of delamination might be considered and progression of the defect could be investigated by using non-linear analysis.