• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.4
• /
• pp.447-457
• /
• 2019

Japan enacted the "Designated Radioactive Waste Final Disposal Act" for the geological disposal of high-level radioactive waste in 2000 and began the site selection process. However, no local government wanted to participate in the siting process. Therefore, in 2015, the Japanese government developed a new site selection process during the literature survey step, and on June 28, 2017 they published a "Nationwide Map of Scientific Features for Geological Disposal" created with the aim of promoting public participation from local governments. This map illustrated the requirements and criteria to be considered in the early or conceptual stages of securing a geological repository and was useful for improving public understanding and exchanging opinions with local governments by analyzing the suitability of different geological disposal sites.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.3 s.18
• /
• pp.47-55
• /
• 2005

In order to design and manage the urban streams, the change of hydraulic characteristics by vegetation must be analyzed clearly. Planting criteria of vegetation in a urban stream were investigated and the design method of vegetation permission map was analyzed in this study. In addition, variations of water level due to vegetation are calculated by quasi two dimensional numerical model, HEC-RAS model and FESWMS model. Joongrang stream(Gunja bridge${\sim}$Jangan bridge reach) was selected as the case study stream. According to the criteria of vegetation, it is decided that vegetation density was $0.5{\sim}1.0$ tree/ha for selected tall tree in right floodplain and shrubs can be planted in the right and left floodplain area except the important hydraulic structures site. The selected shrubs planting simulations with three models show that water level in selected floodplain area increase approximately 12cm for the 100 year return period flood. The applicability of vegetation permission map in Korean urban stream was analyzed in this paper.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4195-4208
• /
• 2022

In this study, operator habitability was numerically evaluated in the event of a fire at the main control bench board (MCB) in a reference main control room (MCR). It was investigated if evacuation variables including hot gas layer temperature (HGLT), heat flux (HF), and optical density (OD) at 1.8 m from the MCR floor exceed the reference evacuation criteria provided in NUREG/CR-6850. For a fire model validation, the simulation results of the reference MCR were compared with existing experimental results on the same reference MCR. In the simulation, various input parameters were applied to the MCB panel fire scenario: MCR height, peak heat release rate (HRR) of a panel, number of panels where fire propagation occurs, fire propagation time, door open/close conditions, and mechanical ventilation operation. A specialized-average HRR (SAHRR) concept was newly devised to comprehensively investigate how the various input parameters affect the operator's habitability. Peak values of the evacuation variables normalized by evacuation criteria of NUREG/CR-6850 were well-correlated as the power function of the SAHRR for the various input parameters. In addition, the evacuation time map was newly utilized to investigate how the evacuation time for different SAHRR was affected by changing the various input parameters. In the previous studies, it was found that the OD is the most dominant variable to determine the MCR evacuation time. In this study, however, the evacuation time map showed that the HF is the most dominant factor at the condition of without-mechanical ventilation for the MCR with a partially-open false ceiling, but the OD is the most dominant factor for all the other conditions. Therefore, the method using the SAHRR and the evacuation time map was very useful to effectively and comprehensively evaluate the operator habitability for the various input parameters in the event of MCB fires for the reference MCR.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.876-879
• /
• 2006

This study was performed for developing the National Environmental Assessment Map (NEAM) in Korea and presenting the application method of NEAM. This NEAM adopted the least indicator method and uses a Geographic Information System (GIS). This map is made through evaluation of 67 items, including greenbelt status and biodiversity. As a result, the construction of NEAM was defined as a process of identifying land use to scientifically assess the physical and environmental value of land and classify conservation value into several grades for the sustainable management of environmental resources. After applying NEAM criteria of five degrees to the whole of Korea, Grade I, showing the highest conservation value, accounted for 45.6% by land area of NEAM. Grades II, III, IV, and Ⅴlikewise accounted for, respectively, 23.6%, 17.9%, 6.3%, and the lowest conservation value of 6.6%. This map can be widely used in, for example, urban and regional planning, development planning, and environment impact assessment.

• Transactions of Materials Processing
• /
• v.15 no.4 s.85
• /
• pp.333-339
• /
• 2006

Hot deformation behavior of a carbon steel (A350 LF2) was characterized by compression tests in the temperature range of $800-1250^{\circ}C$ and the strain rate range of $0.001-10s^{-1}$, The microstructural evolution during hot compression was investigated and deformation mechanisms were analyzed by constructing a deformation processing map. Processing maps were generated using the combination of dynamic material model (DMM) and flow instability theories based on the flow stability criteria and Ziegler's instability criterion. In order to evaluate the reliability of the map, the mirostructural characteristics of the hot compressed specimens were correlated with test conditions in the stable and unstable regime. The combined microstructural and processing map of A350 LF2 was applied to predict an optimum condition and unstable regions for hot forming.

• Korean Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.69-80
• /
• 2004

The purpose of this study is to suggest methods for the community design through users' behavior study in apartment housing. This study was approached by using both theoretical investigation and empirical research. The theoretical investigation actualized the concept of community design in apartment housing through a literature survey. The empirical survey focused on seeking out a user-oriented design criteria based on the analysis of residents' usage behavior and mental map. The results of this study are as follow: First. regarding the analysis of the residents' attitude toward the share community space(SCS), it was found that the SCS made a sense as community facilities in apartment housing. Second, regarding the SCS through the metal map, it was shown that the sketch map analysis was a useful research method for the community design by actualizing the residents' behavior characteristics. Third. as to the results of analyzing the metal map, it was found that the considered characteristics in recognition of the SCS were related to the liking with the main paths, cross nodes of the moving line, the location of center. and the complexity. In conclusion, the SCS is the main of community design in apartment housing and the above characteristics in recognition are useful as the guidelines in the SCS planning.

• Journal of Environmental Impact Assessment
• /
• v.4 no.2
• /
• pp.71-91
• /
• 1995

In order to develop an appropriate set of criteria applicable for environmental impact assessment (EIA) of natural forest 8 items are proposed. The criteria are vegetation distribution area (DA), distribution pattern (DP), size (S), diameter of breast height of tree (DBH), humus (H), sustainment (ST), successional stage (SS) and impact of adjacent ecosystem (IAE), Each criterion has an interval which minimum 1 score to maximum 5 score Forest Evaluation Index (FEI) was obtained as the sum of 8 criteria value. Above 70% is considered to be absolutely conservative and from 50% to 70% range of total score is to be considered conservative. In the case of the Sancho˘ng Pumping-up Power Plant of Mt. Chiri, 8 criteria were applied base on actual vegetation map. Pinus densiflora community got 73%(29 scores) and Quercus variabilis - Q. serrata community got 60%(24 scores). This may be said that this local vegetation has high ecological potentiality. These criteria cannot always be absolutely evaluation tool. So it is expected to take the more time to be developed further, and holistically added by the other field such as fauna, geological feature etc.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.657-666
• /
• 2009

In GIS area, many line simplification algorithms are studied among generalization methods used for making the building data in the form of digital map from the original line data. On the other hand, there are few studies on the simplification algorithm considering the drawing rules of the digital map in Korea. In this paper, the line simplification algorithm based on the drawing rules is proposed as the methodology to create or update the building data of digital map by extracting the building outline from the CAD data used in construction. To confirm the usefulness of the algorithm, this algorithm and four other effective and general line simplification algorithms (e.g., Douglas-Peucker algorithm) are applied to the same building outlines. Then, the five algorithms are compared on five criteria, the satisfaction degree of the drawing rules, shape similarity, the change rate of the number of points, total length of lines, and the area of polygon. As a result, the proposed algorithm shows the 100% of satisfaction degree to the drawing rules. Also, there is little loss in four other mentioned criteria. Thus, the proposed algorithm in this paper is judged to be effective in updating the building data in digital map with construction drawings.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1011-1021
• /
• 2016

This study performs the potential flood hazard analysis by applying elevation data, soil data and land use data. The susceptibility maps linked to elevation, soil and land use are combined to develop the new types of flood hazard map such as runoff production map and runoff accumulation map. For the development of the runoff production map, land use, soil thickness, permeability, soil erosion and slope data are used as runoff indices. For the runoff accumulation map, elevation, knick point and lowland analysis data are used. To derive an integrated type of flood potential hazard, a TOPSIS (The Technique for Order of Preference by Similarity to Ideal Solution) technique, which is widely applied in MCDM (Multi-Criteria Decision Making) process, is adopted. The indices applied to the runoff production and accumulation maps are considered as criteria, and the cells of analysis area are considered as alternatives for TOPSIS technique. The model is applied to Gamcheon watershed to evaluate the flood potential hazards. Validation with large scale data shows the good agreements between historical data and runoff accumulation data. The analysis procedure presented in this study will contribute to make preliminary flood hazard map for the public information and for finding flood mitigation measures in the watershed.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.263-266
• /
• 2004

We make DEM of the area that elevation value varies rapidly by the aid. This study evaluates the accuracy and workability between the existing DEM making mathod by processing break line and the DEM absorption method by using the program like ARC TIN or AML. The object data of DEM generation is 1/5,000 digital map publicated by NGII and this study uses 100pieces of map as the criteria. We correct the error by Geoconv and generate DEM by using ARC TIN, ARC VIEW. Accuracy Evaluation accomplished by drawing 100 points from 1/5000 digital map.