• Radiation Oncology Journal
• /
• 제28권1호
• /
• pp.1-8
• /
• 2010

목 적: 흉선종환자에서 방사선치료 효과를 평가하고 생존율에 영향을 미치는 예후인자를 파악하기 위하여 후향적 분석을 시행하였다. 대상 및 방법: 2002년 3월부터 2008년 1월까지 본원에서 흉선종으로 진단 받고 방사선치료를 시행 받은 21명의 환자를 분석하였다. 대상환자의 추적관찰 기간은 3~89개월(중앙값, 37개월)이었다. 남녀 구성비는 4：3이었고 연령분포는 24~77세(중앙값, 57세)이었다. Masaoka병기는 II기 10명(47.6%), III기 7명(33.3%), IVa기 4명(19.1%)이었다. 전체 21명 중 15명(완전절제[흉선절제술], 14명; 불완전절제, 1명)에서 수술이 시행되었고, 시험적 개흉술(exploratory thoracotomy), 경부림프절 생검 등을 포함한 조직검사만 시행한 경우는 6명(28.6%)이었다. 병리학적으로 WHO 세포형 A 1명(4.8%), B1-3 10명(47.6%), C 10명(47.6%)이었다. 방사선치료는 3차원입체조형기법으로 시행하였고 총 방사선선량은 52~70.2 Gy (중앙값, 54 Gy)이었다. 성별, 연령, 종양의 크기, 병리학적 분류, Masaoka 병기, 수술시행 여부, 근무력증 유무 및 방사선량 등에 따른 전체 및 무진행생존율의 차이를 분석하였다. 결 과: 전체 환자에서 3년 생존율은 80.7%이었고 3년 무진행생존율은 78.2%이었다. WHO 세포형 C 10명에서 완전절제를 시행한 4명 중 3명(75%)이 생존하였고, 조직검사만 시행한 6명 중 3명(50%)이 생존하였다. 수술을 시행받은 15명 중 방사선조사 범위 내에서의 재발은 없었다. 4명(19.1%)에서 원격전이가 확인되었다. 조직검사만 시행받은 6명의 치료반응은 부분관해 4명(66.6%), 불변 1명(16.7%) 그리고 진행 1명(16.7%)이었다. 치료 후 방사선폐렴이 Radiation Therapy Oncology Group (RTOG) grade 1이 1명(4.8%), grade 2가 2명(9.5%), grade 3과 grade 4가 각각 1명(4.8%) 있었다. 단변량 분석상 생존율에 유의한 예후인자는 연령(60세 이상, 58.3%; 60세 미만, 100%; p=0.0194), 병리학적 분류(WHO 세포형 A-B3, 100%; C, 58.3%; p=0.0194), 수술시행여부(시행, 93.3%; 미시행, 50%; p=0.0096)이었다. 결 론: 수술 후 보조적으로 방사선치료를 시행 받은 15명 모두 방사선치료 조사야 내 재발이 없었고 WHO 세포형 C에서 방사선치료 전 수술이 시행된 경우 조직검사만 시행된 경우보다 좋은 성적을 보였다. 이에 저자들은 흉선종 환자들을 대상으로 한 방사선치료 경험을 보고하는 바이다.

• Radiation Oncology Journal
• /
• 제21권4호
• /
• pp.299-305
• /
• 2003

목적: 후두암 방사선치료의 표준화를 위하여 후두암에 관한 기본적인 임상 자료를 축적하고 필요한 조사 항목을 결정하여 전국적인 웹 기반 데이터 베이스 시스템을 개발하고자 하였다. 대상 및 방법: 1998년 1월부터 1999년 12월까지 호서호남 지역에서 후두암으로 진단되어 방사선치료를 받은 환자를 대상으로 임상적 분석을 시행하였다. 환자 선정 기준은 18세 이상이며 과거력상 타 장기의 암 진단 병력이 없고 후두에서 기원한 원발성 상피세포암으로 과거 후두에 대한 다른 질환으로 치료력이 없는 환자를 대상으로 하였다. 후두암에 관한 조사 항목 개발은 대한방사선종양학회 호서호남지회 소속 병원의 전문의들이 합의하여 일차적으로 선정한 항목에 대하여 각 병원에서 자체적으로 조사하였다. 통계처리는 SPSS v10.0을 이용하였다. 결과: 자료가 수집된 총 증례수는 45예이었다. 환자의 연령분포는 28$\~$88세(중앙값: 61)이었고 남녀비는 10 대 1로 대부분 남자에 발생하였다. 원발부위는 성문암이 28예(62$\%$), 성문상부암이 17예(38$\%$)이었다. 병리소견으로는 편평세포암이 대부분이었다(44/45, 98$\%$). AJCC (1997년도) 병기 I+II는, 성문암 28예 중 24예(86$\%$)에 비해 성문상부암의 경우는 16예 중 8예(50$\%$)이었다(p=0.002). 증상은 애성이 n예(89%$\%$로 가장 많았다. 진단은 간접후두경이 전체환자에서, 직접후두경검사는 43예(98$\%$)에서 각각 시행되었다. 치료로서 성문암 28예와 성문상부암 17예 중, 방사선 단독치료는 21예(75$\%$), 6예(35$\%$)에서 각각 시행되었다. 또한 수술요법과 방사선요법의 병용은 각각 5예(18$\%$), 8예(47$\%$)이었고, 항암화학요법과 방사선요법의 병용치료는 각각 2예(7$\%$), 3예(18$\%$)이었으나 두 원발 병소 간에 병용치료 빈도의 유의한 차이는 없었다(p=0.20). 방사선치료는 모두 선형가속기 6 MV X-ray를 이용하여 통상적 분할조사 법으로 시행되었다. 분할선량은 성문암 환자의 86$\%$에서 2.0 Gy를 사용한 반면 성문상부암은 59$\%$에서 1.8 Gy를 각각 사용하였다. 방사선단독치료를 완료한 환자에서 원발병소의 평균 총방사선량은 성문암에서 65.98 Gy, 성문상부암에서 70.15 Gy이었다. 수집된 자료를 기초로 후두암 방사선치료형태 연구에 필요한 총 12개의 모듈과 90개의 항목을 개 발하였다. 결론: 본 연구에서는 후두암 데이터베이스 시스템에 필요한 연구 항목을 개발하였다. 향후 웹 기반 데이터 베이스 시스템을 완성하고 전국의 방사선치료 자료를 축적하여 후두암에 대한 한국형 방사선치료의 표준화 및 적정화를 기하고자 한다.

• 디자인학연구
• /
• 제2권1호
• /
• pp.63-97
• /
• 1989

There is nothing more important than the form and function in design, because every design product can be done on the basis of them. Form and Function are already existed before the word of design has been appeared and all the natural and man-made things' basic organization is based on their organic relations. The organic relations is the source of vitality which identifies the subsistance of all the objects and the evolution of living creatures has been changed their appearances by the natural law and order. Design is no exception. Design is a man-made organic thing which is developed its own way according to the purposed aim and given situations. If so, what is the ultimate goal of design. It is without saying that the goal is to make every effort to contribute to the -human beings most desirable life by the designer who is devoting himself to their convenience and well-being. Therefore, the designer can be called the man of rich life practitioner. This word implies a lot of meanings since the essence of design is improving the guality of life by the man-made things which are created by the designer. Also, the things are existed through the relations between form and function, and the things can keep their value when they are answered to the right purpose. In design, thus, it is to be a main concern how to create valuable things and to use them in the right way, and the subject of study is focused on the designer's outlook of value and uk relations between form and function. Christopher Alexander mentioned the importance of form as follows. The ultimate object of design is form. Every design problem begins with an effort to achieve fittness between the form and its context. The form is the solution to the problem: the context defmes the problem. In other words, when we speak of design, the real object of discussion is not form alone, but the ensemble comprising the form and its context. Good fit is a desirable property of this ensemble which relates to some particular division of the ensemble into form and context. Max Bill mainatined how important form is in design. Form represents a self-contained concept, and its embodiment in an object results in that object becoming a work of art. Futhermore, this explains why we use form so freguently in a comparative sense for determining whether one thing is less or more beautiful than another, and why the ideal of absolute beauty is always the standard by which we appraise form, and through form, art itself. Hence form has became synonymous with beauty. On the other hand, Laszlo Moholy-Nagy stated the importance of function as follows. Function means the task an object is designed to fulfill the task instrument is shaping the form. Unfortunately, this principle was not appreciated at the same time but through the endeavors of Frank Lloyd Wright and of the Bauhaus group and its many collegues in Europe, the idea of functionalism became the keynote of the twenites. Functionalism soon became a cheap slogan, however, and its original meaning blurred. It is neccessary to reexamine it in the light of present circumstances. Charles William Eliot expressed his idea on the relations between function and beauty. Beauty often results chiefly from fittness: indeed it is easy to manitain that nothing is fair except what is fit its uses or functions. If the function of the product of a machine be useful and valuable, an the machine be eminently fit for its function, it conspicuously has the beauty of fittness. A locomotive or a steamship has the same sort of beauty, derived from the supreme fittness for its function. As functions vary, so will those beauty..vary. However, it is impossible to study form and function in separate beings. Function can't be existed without form, and without function, form is nothing. In other words, form is a function's container, and function is content in form. It can be said that, therefore, the form and function are indispensable and commensal individuals which have coetemal relations. From the different point of view, sometimes, one is more emphasized than the other, but in this case, the logic is only accepted on the assumption of recognizing the importance of the other's entity. The fact can be proved what Frank Hoyd wright said that form and function are one. In spite of that, the form and function should be considered as independent indivisuals, because they are too important to be treated just as the simple single one. Form and function have flexible properties to the context. In other words, the context plays a role as the barometer to define the form and function, also which implies every meaning of surroun'||'&'||'not;dings. Thus, design is formed under the influence of situations. Situations are dynamic, like the design process itself, in which fixed focus can be cripping. Moreover, situations control over making the good design. Judging from the respect, I defined the good design in my thesis An Analytic Research on Desigh Ethic, "good design is to solve the problem by the most proper way in the situations." Situations are changeable, and so is design. There is no progress without change, but change is not neccessarily progress. It is highly desirable that there changes be beneficial to mankind. Our main problem is to be able to discriminate between that which should be discarded and that which should be kept, built upon, and improved. Form and Function are no exception. The practical function gives birth to the inevitable form and the $$\mu$ti-classified function is delivered to the varieties of form. All of these are depended upon changeable situations. That is precisely the situations of "situation de'||'&'||'not;sign", the concept of moving from the design of things to the design of the circumstances in which things are used. From this point of view, the core of form and function is depended upon how the designer can manage it efficiently in given situations. That is to say that the creativity designer plays an important role to fulfill the purpose. Generally speaking, creativity is the organization of a concept in response to a human need-a solution that is both satisfying and innovative. In order to meet human needs, creative design activities require a special intuitive insight which is set into motion by purposeful imagination. Therefore, creativity is the most essential quality of every designer. In addition, designers share with other creative people a compulsive ingenuity and a passion for imaginative solutions which will meet their criteria for excellence. Ultimately, it is said that the form and function is the matter which belongs to the desire of creative designers who constantly try to bring new thing into being to create new things. In accordance with that the main puppose of this thesis is to catch every meaning of the form and function and to close analyze their relations for the promotion of understanding and devising practical application to gradual progression in design. The thesis is composed of four parts: Introduction, Form, Function and Conclusion. Introduction, the purpose and background of the research are presented. In Chapter I, orgin of form, perception of form, and classification of form are studied. In Chapter II, generation of function, development of function, and diversification of function are considered. Conclusion, some concluding words are mentioned.ioned.

• Radiation Oncology Journal
• /
• 제28권4호
• /
• pp.193-204
• /
• 2010

목적: 방사선치료 단독요법 또는 동시항암화학방사선치료(concurrent chemoradiation therapy, CCRT)를 시행한 코인두암 환자들의 장기 추적결과를 바탕으로 생존율 재발양상 부작용 및 예후인자를 분석하였다. 대상 및 방법: 1981년 12월부터 2006년 12월까지 코인두암으로 진단받고 고려대학교의료원 방사선종양학과에서 방사선치료를 시행한 190명의 환자를 대상으로 분석하였다. 연령은 8세부터 78세(중앙값 49세) 이었으며, 성별은 남자가 141명, 여자가 49명이었다. 조직학적 분류는 각질화암이 10명 비각질화암이 166명, 기저양평편상피암이 1명이었다. American Joint Committee on Cancer 병기 I이 7명(3.6%), IIA 8명 (4.2%), IIB 33명(17.4%), III 82명(43.2%), IVA 31명(16.3%), IVB 29명 (15.3%)이었으며, 방사선치료 단독요법으로 치료한 환자는 103명이었고, CCRT를 시행한 환자는 87명이었다. 원발병소에 조사된 방사선량은 일일 선량 1.8~2.0 Gy, 총선량 66.6~87 Gy, 중앙값 72 Gi 였다. 생존율, 예후인자 및 부작용에 대하여 후향적으로 분석하였고 급, 만성 부작용 평가는 Radiation Therapy Oncology Group 분류법을 이용하였다. 결과: 190명 중 184명(96.8%)이 계획된 치료를 마쳤으며 방사선치료 기간은 19~88일(중앙값 63일)이었다. 전체 환자의 추적관찰기간은 2~2787개월로 평균 73개월 중앙값 52개월 이었다. 93명(48.9%)의 환자에서 재발이 발생하였는데 국소재발이 44명(23.2%), 림프절재발 13명(6.8%), 원격전이가 49명(25.8%)이었고 원격전이 부위는 뼈, 폐, 간 전이가 각각 23, 18, 12명이었다. 5년 및 10년 전체 생존율(overall survival rate, OS)은 각각 55.6%, 44.5%이었고, 중앙값 52개월이었다. 무병생존율 (disease-free survival rate, DFS)은 5년, 10년이 각각 54.8%, 51.3%이었고, 질병특이생존율(disease-specific survival rate, DSS)은 5년, 10년이 각각 65.3%, 57.4%이었다. 단변량분석에서 CCRT를 받은 환자, 젊은 연령, 여성이 OS, DFS 및 DSS가 유의하게 높았고, CCRT를 시행한 환자와 기간이 짧았던 환자에서 유의하게 원격전이가 적었다. 다변량분석에서는 CCRT를 받은 환자, 여성에서 OS, DFS 및 DSS가 통계적으로 유의하게 높았고, 국소재발에는 성별, 원격전이에는 CCRT시행여부가 영향을 미친 요인으로 나타났다. 방사선치료 도중 발생한 부작용으로 3등급 이상의 점막염 혈액학적 부작용은 각각 42명(22.1%), 18명(9.5%)이었고, 치료기간이 연장된 환자가 59명이었다. 항암화학치료를 병용한 환자에서 통계적으로 의미 있게 부작용 발생빈도가 높았으나 치료기간의 연장에는 통계적으로 유의한 차이를 보이지 않았다. 추적관찰 기간 동안 3등급 이상의 청력장애, 턱관절장애가 각각 9, 6예가 있었다. 결론: 본 연구의 결과, CCRT를 시행한 환자, 여성, T-병기, N-병기 및 연령이 낮은 환자에서 생존율의 향상이 있음을 확인하였다. CCRT를 했을 때 생존율 향상과 원격전이율 감소를 보여 항암화학치료의 역할을 확인할 수 있었으나 항암화학치료의 동시병용이 반드시 국소 및 영역제어율의 향상을 가져오는 것은 아니었다. 따라서 CCRT의 부작용을 감안할 때 세기조절방사선치료(intensity modulated radiation therapy)와 같은 치료에서 각 치료 방법의 역할과 기여도에 대한 비교 연구가 향후 시행되어야 할 것이다.차이를 보이지 않았다. 추적관찰 기간 동안 3등급 이상의 청력장애, 턱관절장애가 각각 9, 6예가 있었다. 결론: 본 연구의 결과, CCRT를 시행한 환자, 여성, T-병기, N-병기 및 연령이 낮은 환자에서 생존율의 향상이 있음을 확인하였다. CCRT를 했을 때 생존율 향상과 원격전이율 감소를 보여 항암화학치료의 역할을 확인할 수 있었으나 항암화학치료의 동시병용이 반드시 국소 및 영역제어율의 향상을 가져오는 것은 아니었다. 따라서 CCRT의 부작용을 감안할 때 세기조절방사선치료(intensity modulated radiation therapy)와 같은 치료에서 각 치료 방법의 역할과 기여도에 대한 비교 연구가 향후 시행되어야 할 것이다

• 한국산업보건학회지
• /
• 제5권1호
• /
• pp.8-15
• /
• 1995

사람의 독성 영향을 평가하는데는 생체 시료중 금속의 분석이 중요한 역할을 한다. 우리 나라는 최근에 산업보건 분야에서 이 문제의 필요성이 제기되어 법적인 정도관리 제도를 도입하였다. 연은 특수건강 진단과 산업위생 정도관리 프로그램에서 표준적인 금속으로 이용된다. 과거 20 여년 동안 연중독은 중금속 중독증 발생율이 가장 높았으며 따라서 산업보건 전문기관들은 혈중연 분석의 능력은 필수적인 것으로 되어 왔다. 또한 혈중연은 연 폭로를 평가하는데 가장 중요한 지표이므로 신뢰성과 정확한 분석이 항상 요구된다. 따라서 본 연구는 우리 나라에서 비교적 잘 알려진 산업보건기관에서 혈중연 분석의 실험실간 측정치의 변동을 평가하기 위하여 축전지 제조공장의 68명 연폭로 근로자로부터 2 ml씩 2개의 시료를 채취하여 그 하나는 순천향대 산업의학연구소(SIIM)에서 분석하고 40개의 시료는 C 대학 산업의학연구소(CIIM), 그리고 나머지 28개의 시료는 일본 K 노동위생기술쎈타(JOHC)에서 분석하여 비교하였으며, 한편 일본 전국노동위생연합회(JFOHO)에서 정도관리용 우혈을 농도별로 6종을 구입하여 우리나라 정도관리 프로그램에 참여하고 있는 C 대학 산업의학연구소, 일본 K 노동위생기술쎈타, Y 대학 산업의학연구소, S 대 환경보건과, D 연구소등 6개 기관에서 분석한 결과를 비교하여 다음과 같은 결과를 얻었다. 1. 순천향대 산업의학연구소와 국내 C 대학 산업의학연구소간 혈중연 농도별 분석결과는 평균값에서 유의한 차이가 없었으며 상대표준편차도 3% 미만인 것으로 나타났으며, 일본 K 노동위생기술쎈타와는 평균값에서 역시 유의한 차가 없었으며 상대표준편차는 최고 6.84% 였다. 2. 순천향대 산업의학연구소와 국내 C 대학 산업 의학연구소간 혈중연 농도별 분석결과가 15% 이하의 차이를 나타낸 시료의 수는 40개중 35개로 87.5%의 일치율을 나타내었으며, 일본 K 노동위생기술쎈타와는 28개 시료중 22개로 78.6%의 일치율을 나타내었다. 3. 순천향대 산업의학연구소의 결과를 종속변수로 그리고 국내 C 대학 산업의학연구소간의 분석치를 독립변수로 하였을 때 단순회귀식은 순천향 = 2.19 + 0.9243 C 대학(p=0.0001), 상관계수는 r = 975(p =0.0001)였으며, 일본 기관과는 순천향 = 1.91 + 0.9794 K 일본(p=0.0001), 상관계수 r = 0.965(p=0.0001)였다. 4. 일본 정도관리시료의 공인 값과 본 연구에서 이들 시료를 분석한 기관들 간의 분석치에 대한 단순회귀식의 설명력(R2)은 모두 0.99 이상이었으며 일본 정도관리 시료의 공인 값을 종속변수로 하고 국내 및 일본 기관들의 정도관리 시료 분석치를 독립변수로 하였을 때 기울기는 0.972에서 1.153으로 정체적으로 양호한 일치율을 나타내었다.

• Radiation Oncology Journal
• /
• 제16권3호
• /
• pp.291-301
• /
• 1998

목적 : 국한성 병기 소세포폐암으로 복합 화학요법과 방사선치료를 받은 환자들에서 통상적 방사선치료와 다분할 방사선치료 간의 종양 관해율, 생존율, 재발율 및 부작용에 대해 비교분석하고자 하였다. 대상 및 방법 : 1989년 11월부터 1996년 12월까지 충남대학교 병원 치료방사선과에서 국한성병기 소세포폐암으로 치료받았던 78명 환자 중 고식적 방사선치료 및 재발성 병변으로 치료받았던 10명을 제외한 68명을 대상으로 후향성 분석을 하였다. 대상환자 중 통상적 방사선치료군(A군)은 26명, 다분할 방사선치료군 (B군)은 42명 이었다. 전체 환자의 연령, 성별 및 ECOG 활동지수는 각각 32-75세 (중앙값 58세), 남자 58명 여자 10명, ECOG 0-1이 58명 2 이상이 10명 이었으며 두군 간에 유사한 분포를 보였다. 방사선치료로서 A군은 총 조사선량 5040-6940 cGy (중앙값 5040 cGy), 180 cGy/fx 로 치료하였고 B군은 총 조사선량 4320-5100 cGy (중앙값 4560 cGy)으로 29명 (69$\%$)은 120 cGy/fx 로, 13명 (31$\%$)은 150 cGy/fx 로 1일 2회 조사하였다. 화학요법은 전체 68명 중 65명에서 VPP (cisplatin 60 mg/$m^2$, etoposide 100 mg/$m^2$) 요법과 CAV (cytoxan 1000 mg/$m^2$, adriamycin 40 mg/$m^2$, vincristine 1 mg/$m^2$) 요법을 교대로 시행하였으며, 화학요법 횟수는 A군 3-10회 (중앙값 6회), B군은 1-11회 (중앙값 6회) 시행하였다. 화학요법 시기는 A군에서 23명이 연속 화학요법을, B군에서는 39명이 동시 화학요법을 시행하였다. 예방적 전뇌조사는 두군 모두에서 완전관해 후 시행하였는데 A군 8명, B군 16명에서 조사선량 2500 cGy/10fx 로 조사하였다. 추적기간은 2-99개월 (중앙값 14개월)였다. 결과 : 종양 관해는 완전관해율, 부분관해율이 각각 A군 35$\%$ (9/26), 54$\%$ (14/26), B군 43$\%$ (18/42), 55$\%$ (23/42)(p=0.119) 였다. 중앙생존기간 및 2년 생존율은 전체환자에서 15개월, 26.8$\%$였고, A군 17개월, 26.9$\%$, B군 15개월, 28$\%$ 0=0.51)였다. 전체환자 중 완전관해 및 부분관해 환자의 2년 생존율은 각각, 35$\%$ 와 24.2$\%$ (p=0.05)였다. 실패양상으로 두 군간에 국소재발 및 원격전이의 통계적인 차이는 없었다 (p=0.125, 0.335). 방사선치료중 발생한 급성합병증으로 RTOG criteria상 중등도 이상의 식도염 및 백혈구 감소가 B 군에서 더 높게 나타났다 (p=0.028, 0.003). 결론 : 국한성 병기 소세포폐암의 복합 화학요법과 방사선치료시 종양의 부분관해 이상의 반응율이 연속화학요법을 받은 통상적 방사선 치료군과 동시화학요법을 받은 다분할 방사선 치료군 모두에서 높게 나타났다. 그러나 두 군간의 생존율에는 통계적인 차이를 보이지 않았다. 급성합병증으로서 식도염과 백혈구 감소가 동시화학요법을 받은 다분할 방사선치료군에서 더 높게났지만, 국한성 병기 소세포폐암에서 동시화학요법과 다분할 방사선치료가 적절한 치료의 한 방법이 될 수 있을 것으로 사료된다. 그러나 국한성 병기 소세포폐암에서 다분할 방사선치료의 장점을 밝히기 위하여 좀더 많은 대상환자와 추적관찰이 필요할 것으로 사료된다.

• Asia Marketing Journal
• /
• 제14권1호
• /
• pp.25-51
• /
• 2012

정보기술의 활용이 마케팅 전략의 중요한 부분으로 부각되는 시장 환경에서 본 논문에서는 패스트푸드 레스토랑에서 주문시 Self Service Technology(SST)를 사용 할 때 기술준비도와 소비자 준비도에 따른 사용동기, 태도, 사용의도의 차이를 검증하고자 하였다. Parasuraman이 TRI를 개발한 이후 SST와 TRI를 접목한 연구가 이루어져 왔지만 여전히 부족한 실정이다. 소비자 준비도 역시 SST사용에 대한 소비자의 동기와 태도 및 의도와 직접적인 영향을 미칠 수 있지만 이에 대한 연구는 이루어지지 않았다. 이에 본 연구에서는 패스트푸드 레스토랑에서 터치스크린 SST를 도입함에 있어 소비자의 기술준비도와 소비자 준비도가 Dabholkar & Bagozzi(1994)가 제안한 SST 핵심태도모델에 미치는 영향을 고찰하였다. 이때 모든 소비자와 상황적 요인에 따른 차이를 파악하고자 자아의식, 상호작용욕구, 기술에 대한 두려움 등의 소비자특성과 지각된 대기시간, 지각된 과밀 등의 상황적 요인에 따른 조절 효과를 검증하였다. AMOS 18.0프로그램을 사용하여 구조방정식 모델로 분석하였고 연구 결과 기술준비도 중 낙관성은 사용용이성과 재미 동기에 유의한 영향을 미치는 것으로 나타났다. 혁신성은 사용용이성과 성과에 유의한 영향을 미치는 것으로 나타났다. 역할의 명확성, 능력 및 자아 효능감으로 구성된 소비자준비도는 사용용이성, 성과와 재미 등 모든 SST사용동기 요소에 기술준비도보다 강하고 유의한 영향을 미치는 것으로 나타났다. 마지막으로 SST 핵심태도모델 내의 SST 사용 동기, 사용 태도 및 사용의도 간의 관계에서 소비자 특성과 상황적 요인의 조절효과를 검증한 결과 지각된 과밀을 제외한 모든 변수들이 조절효과를 지니는 것으로 나타났다. 이러한 연구 결과를 바탕으로 터치스크린 SST를 도입하려는 기업에 실무적 제언을 하였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.