• Structural Engineering and Mechanics
• /
• 제24권2호
• /
• pp.181-194
• /
• 2006

The masonry is a complex heterogeneous material and its shear deformation and fracture is associated with very complicated progressive failures in masonry structure, and is investigated in this paper using a mesoscopic mechanical modelling, Considering the heterogeneity of masonry material, based on the damage mechanics and elastic-brittle theory, the newly developed Material Failure Process Analysis (MFPA) system was brought out to simulate the cracking process of masonry, which was considered as a three-phase composite of the block phase, the mortar phase and the block-mortar interfaces. The crack propagation processes simulated with this model shows good agreement with those of experimental observations by other researchers. This finding indicates that the shear fracture of masonry observed at the macroscopic level is predominantly caused by tensile damage at the mesoscopic level. Some brittle materials are so weak in tension relative to shear that tensile rather than shear fractures are generated in pure shear loading.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.647-650
• /
• 2004

This paper deals with the damage assessment of the concrete beam using Damage-area concept and the modulus of elasticity reduction of the beam was evaluated. Simply supported concrete beams were loaded at the mid-span. When the displacements from the tests were increased more than $10\%$ of the initial values, flexural cracks occured. Judging from the observed cracks, damaged area of the beams were assumed and the modulus of elasticity reduction using the smeared-cracking concept was estimated to minimize the error between the test results and analytical results. Main parameters for the assessment were height of the crack area, length of the crack area, position of the crack area and the modulus of elastic reduction ratio. In each stage, damaged elements and their stiffness reduction were estimated to minimized the error.

• 대한기계학회논문집A
• /
• 제31권6호
• /
• pp.718-724
• /
• 2007

Some of gas turbine model of 7F-Class has constructed and is operating with units domestically. Non-destructive testing (NDT) is one of the methods being used to inspect damage $1^{st}$ stage bucket and review damage trends. We also analyze damage configuration and microstructure according to material and compare with pape of electric power research institute (EPRI). The damaged mode could be determined by leveraging failure analysis. Especially, configuration uprate of bucket is not only to prevent damage during operation but also avoid domestic manufacturing by the competitors. Modifications were mainly concentrated on surfaces such as cooling hole and bucket tips. Analyzing of bucket damage, the earlier model of 7F-Class used with one cycle with equivalent operation hour (EOH), has various cracking of the bucket surface. Bucket damage of new model is centered on tip area (54%) as analyzed by EPRI research. We conclude that improving bucket configuration would increase repair rate on the bucket tip.

• Structural Engineering and Mechanics
• /
• 제26권5호
• /
• pp.569-589
• /
• 2007

This paper presents an analytical model for RC beam-column connections that takes into account bond deterioration between reinforcing steel and concrete. The model is based on the Lumped Damage Mechanics (LDM) theory which allows for the characterization of cracking, degradation and yielding, and is extended in this paper by the inclusion of the slip effect as observed in those connections. Slip is assumed to be lumped at inelastic hinges. Thus, the concept of "slip hinge", based on the Coulomb friction plasticity theory, is formulated. The influence of cracking on the slip behavior is taken into account by using two concepts of LDM: the effective moment on an inelastic hinge and the strain equivalence hypothesis. The model is particularly suitable for wide beam-column connections for which bond deterioration dominates the hysteretic response. The model was evaluated by the numerical simulation of five tests reported in the literature. It is found that the model reproduces closely the observed behavior.

• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.660-669
• /
• 1989

본 논문에서는 쐐기형 다이를 이용한 판재의 인발에 대한 슬립라인장에서 스트레인을 구하는 방법을 제시하고 이로부터 가공중에 생길 수 있는 역학적 문제의 공학적 해석을 얻고자 한다.

• 한국정밀공학회지
• /
• 제12권11호
• /
• pp.98-109
• /
• 1995

An investigation was performed to study the inner damage of laminated composite plates subjected to out-of-plane load. During the investigation, inpact velocity and equivalent static load relationship was derived. Reddy's higher-order shear deformation theory(HSDT) and Hashin's failure criteria were used to determine inner stresses and damaged area. And impact testing was carried out on laminated composite plates by air gun type impact testing machine. The CFRP specimens were composed of [ .+-. 45 .deg. ]$_{4}$and [ .+-. 45 .deg. /0 .deg. /90 .deg. ]$_{2}$ stacking sequences with 0.75$^{t}$ * 26$^{w}$ * 100$^{l}$ (mm) dimension. After impact testing. As a result, a relationship holds between damaged area and impact energy, and a matrix cracking was caused by the interlaminar shear stress in the middle ply and was caused by the inplane transverse stress in the bottom ply.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.269-272
• /
• 2008

본 연구에서는 취성적인 시멘트 복합체에 2%이내의 단섬유를 보강하여 균열하중이 이후에도 급격한 강도저하 없이 강재와 같은 변형경화 특성을 부여한 신개념의 건설재료인 변형 경화형 시멘트 복합체(SHCC)를 활용한 콘크리트 구조물의 균열제어성능 개선을 위한 방안을 모색하고자 한다. 본 연구에 활용된 SHCC는 물겹합재비 0.45의 시멘트 복합체에 1.3%의 PVA 섬유 및 0.2%의 PE 섬유를 보강하여 제조되었다. 단면 $100{\times}100mm$의 정사각형 단면을 갖는 무근 콘크리트 보와 인장측 하부면에서 30 및 50mm 두께의 콘크리트를 SHCC로 단면 대체한 보의 휨 및 균열진전 과정을 비교하여 본 연구에서 제조된 SHCC에 의한 균열제어성능을 평가하고자 하였다. 인장측 하부면을 SHCC로 대체한 콘크리트 보 실험체의 휨거동 특성 및 균열제어성능은 무근 콘크리트 보에 비하여 크게 개선되었다.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.171-183
• /
• 2017

Strengthening reinforced concrete (RC) beams with openings by using aramid fiber reinforcement polymers (AFRP) on the beams' surfaces offers a useful solution for upgrading concrete structures to carry heavy loads. This paper presents a repairing technique of the AFRP sheets that effectively strengthens RC beams, controls both the failure modes and the stress distribution around the beam chords and enhances the serviceability (deflection produced under working loads be sufficiently small and cracking be controlled) of pre-cracked RC beams with openings. To investigate the possible damage that was caused by the service load and to simulate the structure behavior in the site, a comprehensive experimental study was performed. Two unstrengthened control beams, four beams that were pre-cracked before the application of the AFRP sheets and one beam that was strengthened without pre-cracking were tested. Cracking was first induced, followed by repair using various orientations of AFRP sheets, and then the beams were tested to failure. This load was kept constant during the strengthening process. The results show that both the preexisting damage level and the FRP orientation have a significant effect on strengthening effectiveness and failure mode. All of the strengthened specimens exhibited higher capacities with capacity enhancements ranging from 21.8 to 66.4%, and the crack width reduced by 25.6-82.7% at failure load compared to the control beam. Finally, the authors present a comparison between the experimental results and the predictions using the ACI 440.2R-08 guidelines.

• 한국도로학회논문집
• /
• 제6권3호
• /
• pp.9-15
• /
• 2004

아스팔트 혼합물의 균열 저항성은 일반적으로 인장 강도, 스티프니스와 같은 단일 물성치를 측정함으로써 평가된다. 그러나, 아스팔트 혼합물의 균열 성능을 평가함에 있어서 단일 물성치의 이용은 의문시되어 왔다. 따라서 본 연구에서는 아스팔트 혼합물의 균열 저항성과 관련이 있는 주요 특성치를 좀 더 심도 있게 규명하고자 하였다. 이를 위해 다양한 하중 조건 하에서 파괴 시험 크리프 시험, 강도 시험이 일반 아스팔트 혼합물과 개질 아스팔트 혼합물에 대해서 수행되었다. 시험 결과, 혼합물의 균열 저항성은 주로 미세 손상 축적 속도에 영향을 받음을 알 수 있었으며, 이 값은 파괴 에너지 한계에 영향을 주지 않으면서 m값에 반영됨을 알 수 있었다. 또한, 짧은 하중 재하 시간 (탄성거동) 동안 얻어지는 스티프니스는 혼합물의 균열 저항성의 차이를 규명하는데 한계가 있음을 알 수 있었다. 따라서 아스팔트 혼합물의 균열 저항성을 보다 명확히 평가하기 위해서는 혼합물의 크리프 거동과 파괴 한계점을 동시에 고려하는 것이 필수적임을 알 수 있었다. 또한 수퍼페이브 간접 인장 강도 시험으로부터 구한 잔여 소멸 에너지는 비교적 손쉬운 실험을 통해 아스팔트 혼합물의 균열 저항성의 상대적인 차이를 보여줄 수 있는 유용한 물성치임을 알 수 있었으며, 장기 크리프 시험에서 얻어지는 파괴 변형률은 아스팔트 혼합물의 크리프 거동과 파괴 한계점을 동시에 고려함으로써 균열 저항성을 평가할 수 있는 유용한 물성치 임을 알 수 있었다.

• Smart Structures and Systems
• /
• 제3권4호
• /
• pp.475-494
• /
• 2007

This paper deals with the development of an innovative distributed construction system based on smart prefabricated concrete elements for the real-time condition assessment of civil infrastructure. So far, two reduced-scale prototypes have been produced, each consisting of a $0.2{\times}0.3{\times}5.6$ m RC beam specifically designed for permanent instrumentation with 8 long-gauge Fiber Optic Sensors (FOS) at the lower edge. The sensing system is Fiber Bragg Grating (FBG)-based and can measure finite displacements both static and dynamic with a sample frequency of 625 Hz per channel. The performance of the system underwent validation in the laboratory. The scope of the experiment was to correlate changes in the dynamic response of the beams with different damage scenarios, using a direct modal strain approach. Each specimen was dynamically characterized in the undamaged state and in various damage conditions, simulating different cracking levels and recurrent deterioration scenarios, including cover spalling and corrosion of the reinforcement. The location and the extent of damage are evaluated by calculating damage indices which take account of changes in frequency and in strain-mode-shapes. The outcomes of the experiment demonstrate how the damage distribution detected by the system is fully compatible with the damage extent appraised by inspection.