• Journal of Hydrogen and New Energy
• /
• v.20 no.6
• /
• pp.505-511
• /
• 2009

The hydriding and electrochemical characteristics of Zr-based $AB_2$ alloy produced by gas atomization have been extensively examined. For the particle morphology of the as-cast and gas-atomized powders, it can be seen that the mechanically crushed powders are irregular, while the atomized powder particles are spherical. The increase of jet pressure of gas atomization process results in the decrease of hydrogen storage capacity and the slope of plateau pressure significantly increases. TEM and EDS studies showed the increase of jet pressure in the atomization process accelerated the phase separation within grain of the gas-atomized alloy, which brought about a poor hydrogenation property. However, the gas-atomized $AB_2$ alloy powders produced by jet pressure of 50 bar kept up the reversible $H_2$ storage capacity and discharge capacity similar to the mechanically crushed particles. In addition, the electrode of gas-atomized Zr-based $AB_2$ alloy of 50 bar showed improved cyclic stability over that of the cast and crushed particulate, which is attributed to the restriction of crack propagation by grain boundary and dislocation with ch/discharging cycling.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.6
• /
• pp.679-690
• /
• 1998

미국 오하이오주 남서쪽에 위치한 Seip 토루군(100 B.C.-A.D. 500경)의 출토유물들에 대하여 현미경으로 관찰되는 인피섬유의 형태학적 손상을 분석하였다. 형태학적 손상이란 외부로부터의 물리적 혹은 화학적 요인에 의해 섬유은 표면과 내면에 발생하는 형태변형을 말한다. Seip직물에 포함된 인피섬유의 형태학적 손상 정도는 본 연구를 위해 제작된 인피섬유손상지로(IBFM)의 점수의 합으로 나타내었다. Seip직물들은 육안으로 보았을 때 우선 숯과 같이 검은 색을 띄고 있는 직물들과 그렇지 않은 직물군으로 분류되었는데 발굴보고서에 설명된 시신과 관련 부장품들의 수습상황으로 미루어 볼 때 검게 된 직물군은 부분적으로 하장된 시신의 부장품이었으며 검게 되지 않은 직물군은 일반매장된 시신의 부장품으로 보였다. Seip직물들은 다시 서로 다른 조직에 따라 분류되는 직물군으로 나뉘어 질 수 있었는데 본 연구에서는 이들 중 가장 빈번히 보이는 교차쌍 위사 트와인조직(Spaced alternate-pair weft-twining)으로 만들어진 직물군과 그 밖의 조직으로 되어 있는 직물군으로 나누고 이들을 각각 얼터씨이트(Alternate)와 기타조직(Pooled)으로 명명하였다. 본 연구에서는 Seip직물들 간에 매장법에 의해 손상정도의 차이가 발생했으며 특히 부븐적으로 화장된 직물과 그대로 묻혀진 직물들 간에 섬유손상 정도의 차이가 있었을 것으로 좌고 이를 확인하기 위해 검게된 직물군과 검게 되지 않은 직물군 간에, 그리고 얼터네이트와 기타조직으로된 직물군들 간에 IBFM 점수의 차이가 있는지 조사하였다. 섬유의 형태학적 손상은 광학현미경과 주사전자현미경을 사용하여 분석하였으며 분석에 이용된 총 샘플수는 총 132개였다. 수집된 데이터는 t-test를 이응하여 분석 하였다. T-test의 분석결과 Seip 직물들은 검게된 직물군과 검게되지 않은 직물군 사이에서 유의한 손상 정도의 차이를 볼 수 있었으며 반면에 조직에 따른 분류에서는 유의한 차이를 볼 수 없었다. IBFM의 평군점수를 비교하면 검게된 직물군보다 검게되지 않은 직물군이 더 높은 점수를 나타내어 후자가 더 많이 손상된 것으로 보여졌다. 7개의 손상형태를 독칩적으로 보았을 때 섬유속의 분리정도 (degree of bundle separation) , 횡금(transverse crack) , 그리고 횡선 (transverse striations) 이 검게된 직물군과 검게 되지 않은 직물군 사이에서, 섬유속의 분리정도, 종금(lengthwise striations)과 횡금이 얼터네이트와 기타조직 사이에서 각각 유의한 차이를 보였다.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.4
• /
• pp.337-345
• /
• 2018

In this study, observations of oil leakage samples taken from the actual site were performed to identify the causes of the oil leakage phenomenon. As a result, the separation of the material components was determined as the main cause of the oil leakage phenomenon based on the changes in the surface conditions, and verification of this was conducted. The evaluation results confirmed that the filler component of the asphalt mastic subsided with the lapse of the settling time, and that the difference ratio of the filler contents of the upper and lower specimens was up to 23.8% after day 28. Based on these results, a hypothesis on the oil leakage mechanism of asphalt mastic was established, and then modeling of the entire process of oil leakage was performed.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.50-55
• /
• 2011

Using ultrasonic irradiation, the separation and recovery of PV cell, made of silicon wafer, from PV module was carried out through selective decomposition of EVA used as an interlaminated binder. The ultrasonic cleaner of bath-type (Output: 130 W, Frequency: 40 kHz) was used as an ultrasonic apparatus in this research. With the fixed distance of 2 cm, from ultrasonic generator to PV cell, the experiment of EVA decomposition was performed in various organic solvents such as Toluene, Trichloroethylene, O-dichlorobenzene, Benzene. And also their concentrations and temperature was changed to survey the optimum conditions. However EVA can be decomposed perfectly at $55^{\circ}C$ within 160 min in 5 M of all kinds of solvent, PV cell may be recovered with being damaged or broken severely. This damage may be resulted from the swelling of EVA in the process of decomposition. Whereas, at the condition of 5 M at $65^{\circ}C$, PV cell can be recovered with the state of minor damage or crack. This implies that the decomposition rate of EVA increases with an increase of temperature, thereby EVA can be decomposed before the swelling of EVA layer. Conclusively, it is possible for PV cell to be recovered within 40 min, at $65^{\circ}C$ in 5 M, with less damage.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.333-339
• /
• 2007

The purpose of this study was to enhance bond performance between recycled PET (polyethylene telephthalat) fiber and cement composites through hydrophilic treatment using maleic anhydride grafted polypropylene(mPP). The mPP with various concentration of 0%, 5%, 10%, 15% and 20% to determine effect on bond behavior of recycled PET fiber were applied as experimental variables. Dog bone shaped specimens according to JCI SF-8 was applied to evaluate the bond strength and pullout energy. The results showed increased bond strength and pullout energy as concentration of mPP. Concentration of 15% mPP showed the most effective results while 20% showed reduced performance results. Because 15% mPP ensures perfect coating while 20% makes thick coating area that resulted in crack propagation and consequent separation of PET fiber and coated area during pullout load occurred. Enhancement mechanism of bond performance of recycled PET fiber and cement composites with each concentration of mPP could be conformed through investigation of microstructure of fiber surface.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.499-507
• /
• 2003

As the load is increased on the steel-concrete composite structure, its interface begins to show nonlinear behavior due to the reduction of interaction, micro-crack, slip and separation, and it causes slip-softening, Therefore, it is essential to consider the partial-interaction analysis technique. Until now, however, full-interaction or, in some instances, the linear-elastic model, which are insufficient to simulate accurate behavior, are assumed in the analysis of composite structure since the analysis method and nonlinear model for interface are very difficult and complicated. Therefore, the design of composite structure is followed by the experimental method which is inefficient-because a number of tests have to be carried out according to the design environments. In this study, we carried out the nonlinear analysis according to various interface nonlinear models by interaction magnitude, and analyzed more accurate structural behavior and performance by maximum tangential traction and slip-softening at the interface. As a result of this study. we were able to prove that the nonlinear model of interface more exactly represents behavior after yielding, such as ultimate load: that initial tangential stiffness of interface has a significant effect on the yielding load of structural members or part: and that the maximum tangential traction and slip-softening mainly effects structural yielding and ultimate load. Therefore, the structural performance of composite structure is highly dependent on the steel-concrete interface or interaction, which may result in initial tangential stiffness, maximum tangential traction and slip-softening in nonlinear model.

• Land and Housing Review
• /
• v.15 no.3
• /
• pp.177-188
• /
• 2024

This study aims to identify vulnerability factors through comprehensive safety diagnosis and to seek improvement measures for the safety and maintenance of facilities. In this study, the results of road tunnel inspections and diagnostics were converted into a database (DB). Using this data, we explored to identify vulnerable elements (NATM, ASSM) based on structural types and to develop efficient improvement measures. In this study, we analyzed 76 detailed safety diagnosis reports covering 45 different types of road tunnel facilities. In the detailed guidelines for comprehensive safety diagnosis, the database (DB) items for identifying vulnerable factors were selected by categorizing the basic information, such as the year of completion and damage items. In addition, AHP analysis was conducted separately through experts in related fields to analyze the correlation between damages. As a result, the primary vulnerability factors for NATM and ASSM were identified as cracks, leaks, insufficient lining thickness, and joint rear. ASSM was identified as relatively more susceptible to network cracks and material separation compared to NATM. In contrast, flaking and rebar exposure were interpreted as more significant vulnerabilities for NATM than for ASSM. In addition, the correlation between elements in NATM was found to be low, whereas in ASSM, the correlation between elements was high, indicating a more organic relationship.

• (The)Study of the Eastern Classic
• /
• no.37
• /
• pp.377-410
• /
• 2009

In the East Asian Confucianism society, Hakmun was aimed to bring human beings and nature into harmony, and to explore a unity between knowledge and conducts. For example, Neo-Confucianism aspired they could explain the human existence and society through a single concept of Iki(理氣, the basic principles and the atmospheric force of nature). In this philosophy, humanics and natural sciences had not been differentiated at all. The East-West cultural interchanges at the beginning of modernity caused a crack in the traditional academic concepts. Through the Hundred Days of Reform(變法自疆運動, a movement of Strenuous Efforts through Reforming the Law), the Western Affairs Movement(洋務運動) in China, Meiji Restoration(明治維新) in Japan, or Innovation Movements(開化運動) and the Patriotic Enlightenment Movement(愛國啓蒙運動) in Korea, the traditional meanings of Hakmun was degraded while it became a target of the criticism of the enlightenment movements. Accordingly, East Asians' perception of Hakmun rapidly began to change. Although there had been the Silhak(實學, practical science) movement in Korea, which tried to differentiate its conceptualization of Hakmun from that of Neo-Confucianism during the 18th and 19th century, the fundamental shift in meaning occurred with the influx of the modern Western culture. This change converted the ultimate objective of Hakmun as well as its methods and substances. The separation of humanics and natural sciences, rise in dignity of the technological sciences, and subdivision of learning into disciplines and their specialization were accelerated during the Korean enlightenment period. The inflow of the modern western science, humanized thought, and empiricism functioned as mediators in these phase and they caused an irreversible crack in the traditional academic thoughts. Confronting the western mode of knowledge, however, the East Asian intellectuals had to explain their new learning by using traditional terms and concepts; modification was unavoidable when they tried to explain the newly imported knowledge and concepts. This presentation focuses on the traditional concepts of 'gyeogchi'(格致, extending knowledge by investigating things) and 'gungni'(窮理, investigation of principles), pervasively used in philosophy, physics and many other fields of study. These concepts will mark the key point with which to trace changes of knowledge and to understand the way how the concept of Hakmun was converted into a modern one.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.51-61
• /
• 2022

Earthenware horn cups with horse head decorations were excavated from Tomb No. 7 of Bokcheon-dong, Dongraegu, Busan Metropolitan City. Made of earth in the shape of a horn, these cups are considered to have been used to drink alcohol or beverage. Large numbers of earthenware horn cups of various shapes were excavated from tombs located in the old territories of Silla and Gaya. A pair of earthenware horn cups were excavated from Tomb No. 7, and the two cups are almost identical in overall shapes and manufacturing techniques despite different sizes. Conservation treatment was carried out for the bigger one of the two horn cups this time. There are two cracks toward the horse head decorations around the mouth with missing parts observed. The chest of the horse touches the ground with one side decorating the horse head and the other side facing the conical mouth of the horn cup. It is in the U shape, striking a balance based on two legs attached behind. The surface of the horn cup was made with a potter's wheel, and the connection to the horse head has traces of cutting and trimming. The horse head is expressed realistically with its features including the ears, eyes, nose, and mouth well apprehended and its color is grey This study intended to investigate manufacturing techniques of the artifact by examining its internal structure through the condition survey in a non-destructive way. CT imaging was used to figure out its manufacturing techniques and to diagnose its condition, and accordingly the scientific conservation treatment was conducted to stabilize the artifact. The precise diagnosis on conservation condition found that there are two chips in the spout with their cracks extended. One of the chips is connected with separation added to the crack. The material which has been used for connection in the past was collected for the infrared spectroscopic analysis, which was identified to be nitrocellulose resin for the connection. Therefore, this conservation treatment focused on removing the old material and preventing the spread of cracks. Before conservation treatment, the condition survey and scientific examination for the artifact were carried out to secure data about the earthenware horn cup with horse head decorations(Treasure). Based on them, effective plans for its conservation treatment was sought for and then existing adhesive was safely removed, and restoration material was selected to take into account its reversibility. In addition, the conservation treatment according to optimal methodologies was conducted through the consultation meeting with experts.