DOI QR코드

DOI QR Code

Decomposition of EVA(Ethylene vinyl acetate) used as an adhesion of photovoltaic(PV) module by ultrasonic irradiation in bath-type cleaner

Bath-type 초음파(超音波) 세척기(洗滌器)를 이용(利用)한 태양전지모듈 접착제(接着劑) EVA(Ethylene Vinyl Acetate) 분해특성(分解特性)

  • Kim, Young-Jin (Dept. of Energy & Resources engineering, Kangwon National University) ;
  • Lee, Jae-Ryeong (Dept. of Energy & Resources engineering, Kangwon National University)
  • 김영진 (강원대학교 에너지.자원공학과) ;
  • 이재영 (강원대학교 에너지.자원공학과)
  • Received : 2011.08.02
  • Accepted : 2011.10.26
  • Published : 2011.12.31

Abstract

Using ultrasonic irradiation, the separation and recovery of PV cell, made of silicon wafer, from PV module was carried out through selective decomposition of EVA used as an interlaminated binder. The ultrasonic cleaner of bath-type (Output: 130 W, Frequency: 40 kHz) was used as an ultrasonic apparatus in this research. With the fixed distance of 2 cm, from ultrasonic generator to PV cell, the experiment of EVA decomposition was performed in various organic solvents such as Toluene, Trichloroethylene, O-dichlorobenzene, Benzene. And also their concentrations and temperature was changed to survey the optimum conditions. However EVA can be decomposed perfectly at $55^{\circ}C$ within 160 min in 5 M of all kinds of solvent, PV cell may be recovered with being damaged or broken severely. This damage may be resulted from the swelling of EVA in the process of decomposition. Whereas, at the condition of 5 M at $65^{\circ}C$, PV cell can be recovered with the state of minor damage or crack. This implies that the decomposition rate of EVA increases with an increase of temperature, thereby EVA can be decomposed before the swelling of EVA layer. Conclusively, it is possible for PV cell to be recovered within 40 min, at $65^{\circ}C$ in 5 M, with less damage.

태양전지(Photovoltaic, PV) 모듈의 층간 접착제로 사용된 EVA(Ethylene Vinyl Acetate)를 초음파 조사(irradiation)를 이용하여, 선택적으로 분해함으로써 모듈 내 실리콘웨이퍼(Si-wafer)로 제조된 셀(cell)을 분리, 회수하는 연구를 진행하였다. 본 실험에 사용한 초음파 발생장치는 bath-type의 초음파 세척기 (Output: 130 W, Frequency: 40 kHz)로, PV모듈과의 거리는 2 cm로 고정하고 유기용매 종류, 농도, 온도를 조절하면서 EVA 분해 및 셀의 분리 최적 조건을 도출하였다. $55^{\circ}C$, 5M인 조건에서는 용매 종류에 상관없이 160 min 이내에 EVA층의 완전 분해는 가능하였으나, 분해과정 중 발현되는 팽창현상(swelling)에 의해 셀의 일부분이 파손된 상태로 회수되었다. 반면에 $65^{\circ}C$, 5M조건에서는 셀의 파손이 억제된 상태로 회수 가능하였으며, 이는 온도 상승에 의해 EVA 성분의 분해속도가 상승되고, 이로 인해 EVA층의 팽창현상이 발현되기 전에 분해가 일어난 결과라고 판단된다.

Keywords

References

  1. 이수홍, 2006: 실리콘 태양전지, Polymer Science and Technology, 17(4), pp. 400-406.
  2. 이재형, 2008: 태양전지 개발동향, 한국정밀공학회지, 25(10), pp. 7-22.
  3. T. Doi, et al., 2001: Experimental study on PV module recycling with organic solvent method, Solar Energy Materials & Solar Cells, 67, pp. 397-403. https://doi.org/10.1016/S0927-0248(00)00308-1
  4. 강석민, 유성열, 이진아, 부봉현, 류호진, 2011: 태양전지폐 모듈로부터 실리콘 및 강화유리 회수에 관한 연구, 한국자원리싸이클링학회지, 20(2), pp. 45-58.
  5. T.M. Bruton, R,D,W Scott, J.P. Nagle, 1994: Re-cycling of High Value, High Energy Content Components of Silicon PV Modules, Proc. of the 12th EC Photovoltaic Solar Energy Conf., pp. 303-304, Amsterdam, Netherlands, 11- 14 April 1994.
  6. R. Bohland, I.I Anisimov, 1997: Possibility of recycling of silicon PV modules, 26th IEEE PV specialist Conf., 26, pp. 1173-1175, Anaheim, CA, 29 September-03 October 1997.
  7. L. Frisson D. Sandra, F. Brisard, 1998: Cost effective recycling of PV modules and the impact on environment, life cycle, energy payback time and cost, WCPEC-2, pp. 2210-2213, Vienna, Austria, 6-10 July 1998.
  8. 김도형, 김영진, 이재령, 2010: 초음파를 이용한 EVA 분해, 한국지구시스템공학회, 47(5), pp. 647-652.
  9. 임봉빈, 김선태, 2002: 초음파분해반응에 있어서 희가스의 영향, 한국환경과학회지, 11(7), pp. 749-755.
  10. 최헌종 등, 2005: 초음파 케비테이션을 이용한 디버링 기술, 한국정밀공학회지, 22(9), pp. 14-19.
  11. Thompson. L.H., Doraiswamy. L. K., 1999: Sonochemistry, Ind. Eng. Chem. Res., 38(4), pp. 1215-1249. https://doi.org/10.1021/ie9804172