• 콘크리트학회논문집
• /
• 제14권3호
• /
• pp.357-364
• /
• 2002

CLWL-DCB 시험편에 대한 변위제어 파괴실험으로 381mm의 균열성장에 대한 저항곡선이 유도되었다. 변형률 게이지를 사용하여 측정된 평균 균열성장속도는 0.70 mm/sec와 55mm/sec이었다. 초기균열에서 측정된 회전각도는 0.70 mm/sec와 55mm/sec의 균열속도에 대해 각각 최소한 171mm와 93mm의 균열성장 이전에 특이성이 존재하는 것을 보여주었다. 저항곡선의 최대 기울기는 0.70mm/sec 균열속도에 대해 25.4mm와 88.9mm 그리고 55mm/sec 균열속도에 대해 50.8 mm와 127mm의 균열성장길이 사이에서 발생되며, 미소균열 국부화에 의한 것으로 판단된다. 빠른 균열속도에서 미소균열성장 구역은 보다 길게 형성되며, 미소균열의 국부화 동안에도 큰 균열성장을 보였다. 0.70mm/sec 균열속도의 파괴저항은 152.4mm의 균열성장 이후에 평균 파괴에너지율의 약 70%인 143N/m의 비교적 일정한 값을 유지하였다. 55mm/sec 균열속도는 254mm 균열성장에서 최대 파괴저항 245N/m까지 증가한 후 파괴저항의 감소되어 불안정 균열성장이 발생될 수 있음을 보여준다. 55mm/sec 균열속도의 저항곡선은 TPB 실험과 유사하여, 시험편의 크기가 작거나 균열의 속도가 빠른 경우에 취성거동을 할 수 있는 것을 보여준다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1021-1026
• /
• 2003

The problem of predicting the fracture strength behavior in orthotropic plate with a crack inclined with respect to the principal material axes is analyzed. Both the load to cause fracture and the crack direction of crack growth arc of interest. The theoretical results based on the normal stress ration theory show significant effects of biaxial loading and the fiber orientation on the crack growth angle and the critical stress. The additional term in the asymptotic expansion of the crack tip stress field appears to provide more accurate critical stress prediction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1402-1405
• /
• 2003

The main object of this study was evaluated by the delamination damage for fiber stacking angle. Therefore, this work need to compare the shape of delamination for a different fiber stacking angie. So this study uses a method of fatigue test which was created [0]$_2$,[+45]$_2$[90]$_2$. The extension of the delamination zone formed between aluminium alloy and glass fiber-adhesive layer were measured by an ultrasonic C-scan image. As a result, the shapes of delamination zone don't depend upon the crack propagation. We could know that the delamination zone grew interaction between stress flow of fiber layer and crack driving force. Hence, the existing study were applied to the stress transfer, fiber bridging effect, delaminantion growth rate should need to the develop useful factor because of change of fiber stacking angle.

• Geomechanics and Engineering
• /
• 제24권3호
• /
• pp.215-226
• /
• 2021

To study the evolution mechanism of cracks in rocks with multiple defects, rock-like samples with multiple defects, such as strip-shaped through-going cracks and cavity groups, are used, and the crack propagation law and changes in AE (acoustic emission) and strain of cavity groups under different inclination angles are studied. According to the test results, an increase in the cavity group inclination angle can facilitate the initial damage degree of the rock and weaken the crack initiation stress; the initial crack initiation direction is approximately 90°, and the extension angle is approximately 75~90° from the strip-shaped through-going cracks; thus, the relationship between crack development and cavity group initiation strengthens. The specific performance is as follows: when the initiation angle is 30°, the cracks between the cavities in the cavity group develop relatively independently along the parallel direction of the external load; when the angle is 75°, the cracks between the cavities in the cavity group can interpenetrate, and slip can occur along the inclination of the cavity group under the action of the shear mechanism rupture. With the increase in the inclination angle of the cavity group, the AE energy fluctuation frequency at the peak stress increases, and the stress drop is obvious. The larger the cavity group inclination angle is, the more obvious the energy accumulation and the more severe the rock damage; when the cavity group angle is 30° or 75°, the peak strain of the local area below the strip-shaped through-going fracture plane is approximately three times that when the cavity group angle is 45° and 60°, indicating that cracks are easily generated in the local area monitored by the strain gauge at this angle, and the further development of the cracks weakens the strength of the rock, thereby increasing the probability of major engineering quality damage. The research results will have important reference value for hazard prevention in underground engineering projects through rock with natural and artificial defects, including tunnels and air-raid shelters.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.5-14
• /
• 1999

Free vibration characteristics of a cantilevered laminated composite beam with multiple non-propagating transverse open cracks are investigated. In the present analysis a special ply-angle distribution referred to as asymmetric stiffness configuration inducing the elastic coupling between chord-wise bending and extension is considered. The multiple open cracks are modelled as equivalent rotational springs whose spring constants are calculated based on the fracture mechanics of composite material structures. Governing equations of a composite beam with open cracks are derived via Hamilton's Principle and Timoshenko beam theory encompassing transverse shear and rotary inertia effect is adopted. The effects of various parameters such as the ply angle, fiber volume fraction, crack numbers, crack positions and crack depthes on the free vibration characteristics of the beam with multiple cracks are highlighted. The numerical results show that the existence of the multiple cracks in an anisotropic composite beam affects the free vibration characteristics in a more complex fashion compared with the beam with a single crack.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.69-78
• /
• 2000

The one-parameter singular expression for stresses and displacements near a crack tip has been widely thought to be sufficiently accurate over a reasonable re ion for any geometry and loading conditions. In many cases, however subsequent terms of the series expansion are quantitatively significant, and so we now consider the evaluation of such terms and their effect on the predicted crack growth direction. For this purpose the problem of a cracked orthotropic plate subjected to a biaxial load is analysed. It is assumed that the material is ideal homogeneous anisotropic. BY considering the effect of the load applied parallel to the plane of the crack, the distribution of stresses and displacements at the crack tip is reanalyzed. In order to determine values for the angle of initial crack extension we employ the normal stress ratio criterion.

• Composites Research
• /
• 제13권3호
• /
• pp.9-20
• /
• 2000

모든 층을 한 방향으로 적층하여 횡방향 굽힘과 축방향 인장운동이 연성되어 나타나는 복합재료 외팔보에 다중횡방향 개구형 크랙이 있는 경우에 대하여 자유진동 특성을 고찰하였다. 모든 크랙 위치에서의 파괴역학적 특성을 스프링 상수로 변환하여 산출하고 크랙사이 구간의 보를 전단변형 및 회전관성효과를 포함하여 해밀톤 원리로부터 운동방정식 및 경계조건을 유도하고, 라플라스 변환법을 사용하여 자유진동 특성에 관한 해를 구하였다. 복합재료의 설계 변수로서 섬유 체적비와 적층각을 설정하였으며, 크랙의 외형적 변수로서 크랙의 갯수, 분포 위치 및 크랙 깊이를 설정하여 이들 변수에 대한 고유진동수 및 모드형상의 변화 경향을 도출함으로써 임의의 다수 크랙이 분포되어 있는 보다 실제적인 상황에서의 진동변화에 근거를 둔 비파괴 검사가 이루어질 수 있는 방안에 대하여 연구하였다. 해석 결과 복합재료 보에 단일 크랙이 있는 경우에 비해 다중 크랙이 있는 경우가 여러 가지 변수에 대해 훨씬 복잡한 형태로 나타나고 있음을 보여준다.

• Smart Structures and Systems
• /
• 제26권3호
• /
• pp.319-329
• /
• 2020

Structural damage to an arch dam is often of major concern and must be evaluated for probable rehabilitation to ensure safe, regular, normal operation. This evaluation is crucial to prevent any catastrophic or failure consequences for the life time of the dam. If specific major damage such as a large crack occurs to the dam body, the assessments will be necessary to determine the current level of safety and predict the resistance of the structure to various future loading such as earthquakes, etc. This study investigates the behavior of an arch dam cracked due to water pressure. Safety factors (SFs), of shear and compressive tractions were calculated at the surfaces of the contraction joints and the cracks. The results indicated that for cracking with an extension depth of half the thickness of the dam body, for both cases of penetration and non-penetration of water load into the cracks, SFs only slightly reduces. However, in case of increasing the depth of crack extension into the entire thickness of the dam body, the friction angle of the cracked surface is crucial; however, if it reduces, the normal loading SFs of stresses and joints tractions reduce significantly.

• Steel and Composite Structures
• /
• 제30권1호
• /
• pp.1-12
• /
• 2019

In this research, an efficient mixed mode I/II fracture criterion is developed for fracture investigation of orthotropic materials wherein crack is placed along the fibers. This criterion is developed based on extension of well-known Maximum Tensile Stress (MTS) criterion in conjunction with a novel material model titled as Equivalent Reinforced Isotropic Model (ERIM). In this model, orthotropic material is replaced with an isotropic matrix reinforced with fibers. A comparison between available experimental observations and theoretical estimation implies on capability of developed criterion for predicting both crack propagation direction and fracture instance, wherein the achieved fracture limit curves are also compatible with fracture mechanism of orthotic materials. It is also shown that unlike isotropic materials, fracture toughness of orthotic materials in mode $I(K)_{IC}{\mid})$ cannot be introduced as the maximum load bearing capacity and thus new fracture mechanics property, named here as maximum orthotropic fracture toughness in mode $I(K_{IC}{\mid}^{ortho}_{max})$ is defined. Optimum angle between crack and fiber direction for maximum load bearing in orthotropic materials is also defined.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.19-24
• /
• 1998

Elastic-plastic fracture toughness($J_{IC}$) by ultrasonic method is evaluated in terms of width and thickness. Widths of specimen in 6061-T6 aluminum alloy are 50mm and 100mm, thicknesses of those are 20mm and 25mm, respectively. Elastic-plastic fracture toughness by ultrasonic method is independent of specimen thickness and side groove. Angle beam probe which are placed on the end of the compact specimen detect the maximum crack extension effectively. Comparing with elastic-plastic fracture toughness by ultrasonic method and that of unloading compliance method, $J_{IC}$ of ultrasonic method are underestimated to that of unloading compliance method. Elastic-plastic fracture toughness of width 100mm specimen are underestimated to that of width 50mm specimen about 20%.