• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.2
• /
• pp.17-24
• /
• 2014

This paper proposes an automatic extraction method of control point based on Geospatial Web Service. The proposed method consists of 3 steps. 1) The first step is to acquires reference data using the Geospatial Web Service. 2) The second step is to finds candidate control points in reference data and the target image by SURF algorithm. 3) By using RANSAC algorithm, the final step is to filters the correct matching points of candidate control points as final control points. By using the Geospatial Web Service, the proposed method increases operation convenience, and has the more extensible because of following the OGC Standard. The proposed method has been tested for SPOT-1, SPOT-5, IKONOS satellite images and has been used military standard data as reference data. The proposed method yielded a uniform accuracy under RMSE 5 pixel. The experimental results proved the capabilities of continuous improvement in accuracy depending on the resolution of target image, and showed the full potential of the proposed method for military purpose.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.57-63
• /
• 2010

Many efficient frequency sharing methods are issued in present because of increasing users with various wireless communication terminals. In the satellite communications, the service coverage is generally very wide so frequency sharing with terrestrial system is essentially needed, and the research is progressing dynamically related on this frequency sharing method. But if we adopt the terrestrial system which is commonly used, it can't avoid the interference from terrestrial service to satellite service. Therefore, this paper will introduce methods for reducing the interference from terrestrial station to earth station using cognitive radio system Satellite system is guaranteed with decreasing interference from terrestrial stations using Genetic Algorithm based power control method. Furthermore, terrestrial systems can have increased QoS because the frequency reuse factor in proposed method is higher than existing methods.

• Journal of KIISE:Information Networking
• /
• v.28 no.3
• /
• pp.377-388
• /
• 2001

An approach for testing multi-protocol Implementation Under Test (IUT) with a single test suite has been proposed in[1]. this paper proposes an algorithm called Multi-protocol Test Method (MPTM) for automatic test case generation based on that approach. With the MPTM, a multi-protocol IUT consisting of two protocol layers is modeled as two Finite State Machines (FSMs), and the relationships between the transitions of the two FSMs are defined as a set of transition relationships pre-execution and carried-by. The proposed algorithm is implemented and applied to a simplified TCP/IP and B-ISDN Signaling/SSCOP. MPTM is able to test the multi-protocol IUT even though the interfaces between the protocol layers are not exposed. It results in that the proposed MPTM allows the same test coverage as conventional test methods even with fewer numbers of test cases.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.824-830
• /
• 2010

In order to prepare for increasing performance requirement for Differential Global Navigation Satellite System (DGNSS) services of International Maritime Organization (IMO) and International Association of Lighthouse Authorities (IALA), this paper focuses on design of network-based Automatic Identification System (AIS) reference station system that can perform the functionality of Differential Global Positioning System (DGPS) reference station in an AIS base station system. AIS base station receives the differential corrections from the DGPS reference station, and it is not a method for transmitting the received differential corrections to onboard AIS units, but it is a method for generating the optimized differential corrections for onboard AIS units in AIS coverage. Therefore this paper proposes an algorithm for generating the differential corrections at AIS reference station, and performs the performance assessment of the proposed algorithm based on DGPS correction data measured from a DGPS reference station. Finally this paper discusses the test results and efficiency of the proposed system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.121-127
• /
• 2011

This paper presents an autonomous formation flight algorithm for micro aerial vehicles (MAVs) and its flight test results. Since MAVs have severe limits on the payload and flight time, formation of MAVs can help alleviate the mission load of each MAV by sharing the tasks or coverage areas. The proposed formation guidance law is designed using nonlinear dynamic inversion method based on 'Leader-Follower' formation geometric relationship. The sensing of other vehicles in a formation is achieved by sharing the vehicles' states using a high-speed radio data link. the designed formation law was simulated with flight data of MAV to verify its robustness against sensor noises. A series of test flights were performed to validate the proposed formation guidance law. The test result shows that the proposed formation flight algorithm with inter-communication is feasible and yields satisfactory results.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.703-710
• /
• 2018

Although various efforts have been made every year to reduce electric fire accidents such as accident analysis and inspection for electric fire accidents, there is no effective countermeasure due to lack of effective decision support system and existing cumulative data utilization method. The purpose of this study is to develop an algorithm for predicting electric fire based on data such as electric safety inspection data, electric fire accident information, building information, and weather information. Through the pre-processing of collected data for each institution such as Korea Electrical Safety Corporation, Meteorological Administration, Ministry of Land, Infrastructure, and Transport, Fire Defense Headquarters, convergence, analysis, modeling, and verification process, we derive the factors influencing electric fire and develop prediction models. The results showed insulation resistance value, humidity, wind speed, building deterioration(aging), floor space ratio, building coverage ratio and building use. The accuracy of prediction model using random forest algorithm was 74.7%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.781-783
• /
• 2014

Mobile ad hoc network(MANET) consists of node that has mobility. MANET has increased overhead that caused by frequent topology changes. For reducing overhead, hierarchical network that communicates through cluster head node has been researched. When traffic is concentrated on cluster head node, cluster member node can't send message. To solve this problem, we proposed Step Parent algorithm. Proposed algorithm, cluster member node checks traffic of cluster head node using route path of other cluster head node in efficient coverage area. When cluster head node has increased traffic, cluster member node make a new route path by route path by routing path to another cluster head node. So cluster member node sends a message to destination node, we check improving delivery ratio.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.5701-5722
• /
• 2018

The continuous increase in the cost of energy production and concerns for environmental sustainability are leading research communities, governments and industries to amass efforts to reduce energy consumption and global $CO_2$ footprint. Players in the information and communication industry are keen on reducing the operational expenditures (OpEx) and maintaining the profitability of cellular networks. Meanwhile, network virtualization has been proposed in this regard as the main enabler for 5G mobile cellular networks. In this paper, we propose a generic framework of slice resource provisioning and customized physical resource allocation for energy-efficiency and quality of service optimization. In resource slicing, we consider user demand and population resources provisioning scheme aiming to satisfy quality of service (QoS). In customized physical resource allocation, we formulate this problem with an integer non-linear programming model, which is solved by a heuristic algorithm based on minimum vertex coverage. The proposed algorithm is compared with the existing approaches, without consideration of slice resource constraints via system-level simulations. From the perspective of infrastructure providers, traffic is scheduled over a limited number of active small-cell base stations (sc-BSs) that significantly reduce the system energy consumption and improve the system's spectral efficiency. From the perspective of virtual network operators and mobile users, the proposed approach can guarantee QoS for mobile users and improve user satisfaction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.100-105
• /
• 2003

In this paper, we propose the novel test method effectively to detect short and open faults in CMOS op-amp. The proposed method uses a sinusoidal signal with higher frequency than unit gain bandwidth. Since the proposed test method doesn't need complex algorithm to generate test pattern, the time of test pattern generation is short, and test cost is reduced because a single test pattern is able to detect all target faults. To verify the proposed method, CMOS two-stage operational amplifier with short and open faults is designed and the simulation results of HSPICE for the circuit have shown that the proposed test method can detect short and open faults in CMOS op-amp.

• The Korean Journal of Applied Statistics
• /
• v.23 no.6
• /
• pp.1235-1243
• /
• 2010

This study proposes a trimmed LAD(least absolute deviation) estimators for multi-dimensional contingency tables and suggests an algorithm to estimate it. In addition, a method to determine the trimming quantity of the estimators is suggested. A Monte Carlo study shows that the propose method yields a better trimming rate and coverage rate than the previously suggest method based on the determinant of the covariance matrix.