• Journal of information and communication convergence engineering
• /
• v.14 no.4
• /
• pp.246-251
• /
• 2016

In this study, we developed a reduced 94 GHz hybrid ring coupler on a GaAs substrate in order to demonstrate the possibility of the integration of various passive components and MMICs in the millimeter-wave range. To reduce the size of the hybrid ring coupler, we used multiple open stubs on the inside of the ring structure. The chip size of the reduced hybrid ring coupler with multiple open stubs was decreased by 62% compared with the area of the hybrid ring coupler without open stubs. Performance in terms of the loss, isolation, and phase difference characteristics exhibited no significant change after the use of the multiple open stubs on the inside of the ring structure. The reduced hybrid ring coupler showed excellent coupling loss of $3.87{\pm}0.33dB$ and transmission loss of $3.77{\pm}0.72dB$ in the measured frequency range of 90-100 GHz. The isolation and reflection were -48 dB and -32 dB at 94 GHz, respectively. The phase differences between two output ports were $180^{\circ}{\pm}1^{\circ}$ at 94 GHz.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.566-572
• /
• 2013

In this study, a collision simulator for rolling stock that considers the plastic deformation of the car body and the dynamic characteristics of a coupler system was developed using Matlab/Simulink. Normally, a coupler system has functions for both connecting the individual car bodies and absorbing the impact energy. A coupler system is composed of a rubber buffer, hydraulic buffer, and deformation tube elements. The coupler system should protect the car body and prevent damage when the shunt speed is less than 10 km/h, which is the regulation speed based on the safety rule for rolling stock. However, if the shunt speed is greater than 10 km/h, a car body is plastically deformed. Therefore, the modeling of the plastic deformation of a car body should be included in a simulator. This collision simulator can provide the design parameters for a coupler system and car body.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.598-604
• /
• 2011

A method of miniaturizing branch line coupler with connected coupled lines is presented. The quarter-wavelength transmission lines in the typical microstrip branch line coupler are replaced with the connected coupled lines with same characteristics of ones for compact size. The connected coupled line is analyzed by T-equivalent circuit and Z parameters based on the even-odd mode analysis. The proposed branch line couplers with connected coupled line are designed and fabricated on FR4 substrate at 2.4 GHz. The measured results show good agreement with theoretical prediction. And the experimental results show that the size of coupler is 37 precent smaller than conventional coupler. This minimized coupler is suitable for Butler Matrix as feeder for mobile communication beam forming antenna.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.487-495
• /
• 2017

The thermal characteristics of the electrodeless lamp are one of the main factors that determine the design and performance of the lamp. The coupler changes the impedance characteristic by heat and its use temperature is usually within about $150^{\circ}C$. In this study, we observed the phenomenon when the coupler was exposed at a temperature of $150^{\circ}C$ or higher, which has not been discussed so far. Two types of coupler A and coupler B with different spacing between the inner tube and the coupler were analyzed for electrical, thermal and optical properties and deterioration characteristics with different heat and heat shielding conditions. First, the impedance of the system is obtained and used as a criterion for analyzing the electrical characteristics through it. The diameters of the two types of couplers are 1 mm, and the experimental result shows that the coupler diameter is 1 mm, which can cancel out the loss of the magnetic field strength. Therefore, based on these results, when the coupler is exposed to high temperature of about $200^{\circ}C$, the efficient design method corresponding thereto is proposed.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.259-264
• /
• 1996

In this study, we performed a modeling for $K^{+}$ ion-exchanged diffused channel waveguide and waveguide-type optical coupler by Wentzel-Kramer-Brillouin(WKB) dispersion equation, normalized field distribution equation for mode and coupled mode theory, and examined the optical-power-dividing of the optical coupler fabricated by using the modeling condition. The optical-power-dividing was observed at the waveguide-type optical coupler with 3[.mu.m] line-width, 6[.mu.m] space between channel waveguides, and 3[mm] interaction length.h.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.169-170
• /
• 2011

In the connection of green frame, the bottom rebar of the precast concrete beam needs joint or anchorage to ensure structural integrity. However, given the characteristics of composite precast concrete joint, enough length over which rebar can be anchored or lap-spliced is not secured. In addition, due to issues with constructability, cost or quality, it is difficult to apply welding or mechanical connection techniques. Therefore, this study analyze the requirement for a bolt-type rebar coupler as a solution for the coupling issue between the lower rebars of green frame beam. The requirement for bolt-type rebar coupler proposed herein will provide basic data for development studies of the rebar coupler.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.251-255
• /
• 2003

In this paper, a miniaturized directional coupler utilizing lumped element is proposed as a interdigital capacitor. The traditional miniaturization technique of transmission line realized a utilizing MIM(Metal-Insulator-Metal) capacitor on CPW(Coplanar Waveguide). However, we present a simplified design procedure without additional manufacturing process utilizing interdigital capacitor on microstrip with ease of design. The similar characteristics between the conventional directional coupler with ${\lambda}/4$ transmission line and the miniaturized directional coupler with ${\lambda}/8$ transmission line are validated through simulation and measurement results. Miniaturization rate of total size is about 25% while coupled line is about 60%. As a result, this proposed directional coupler can reduce the size of mobile communication system at 2 GHz.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.288-291
• /
• 2003

Nowadays, the study on the ceramic components and modules used in telecommunication system is being performed. Coupler is a microwave passive component used for power coupling or dividing and directional coupler is designed to be possible optional dividing percentage. In our research, We developed 14dB and 19dB directional couplers of EGSM band. The good characteristics, the target insertion loss and high isolation, of couplers is obtained by LTCC processing using a ceramic material.

• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.373-376
• /
• 2002

An asymmetrical directional coupler with two nonidentical fibers has, for the first time, been proposed and analyzed for an EDFA gain flattening filter (GFF). The characteristics of the transmission spectra of the GFFs have been theoretically investigated for the core spacings, the coupling lengths and the fiber parameters of the asymmetrical directional coupler. The analytical results show that an EDFA gain spectrum with flatness of ~7 ㏈ can be flattened to within $\pm$0.75 ㏈ over a bandwidth of 30 nm by using the asymmetrical directional coupler-based GFF.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.4
• /
• pp.150-154
• /
• 2001

In this paper, we presented a novel structure of microstrip directional coupler for realizing the high directivity characteristic and tight coupling. The achievement of the high directivity with microstrip configuration was carried out by matching the even and odd mode effective phase velocities. By using 2-dimensional finite element (FE) calculations, the phase velocity for each mode and design parameters were extracted for given dimensions. Based on the extracted design parameter with phase-matched condition, we designed and fabricated 3dB and 4.7dB directional coupler at 2.0GHz. Experimental results of microstrip coupler show good performance with excellent isolation characteristics.