• Coupled systems mechanics
• /
• v.6 no.3
• /
• pp.287-316
• /
• 2017

This paper studies the particularities of the forced vibration of the hydro-elastic system consisting of a moving elastic plate, compressible viscous fluid and rigid wall. This study is made by employing the discrete-analytical solution method proposed in the paper by the authors (Akbarov and Panakhli (2015)). It is assumed that in the initial state the fluid flow is caused by the axial movement of the plate and the additional lineally-located time-harmonic forces act on the plate and these forces cause additional flow field in the fluid and a stress-strain state in the plate. The stress-strain state in the plate is described by utilizing the exact equations and relations of the linear elastodynamics. However, the additional fluid flow field is described with linearized Navier-Stokes equations for a compressible viscous fluid. Numerical results related to the influence of the problem parameters on the frequency response of the normal stress acting on the plate fluid interface plane and fluid flow velocity on this plane are presented and discussed. In this discussion, attention is focused on the influence of the initial plate axial moving velocity on these responses. At the same, it is established that as a result of the plate moving a resonance type of phenomenon can take place under forced vibration of the system. Moreover, numerical results regarding the influence of the fluid compressibility on these responses are also presented and discussed.

• The Journal of Society for e-Business Studies
• /
• v.7 no.1
• /
• pp.87-106
• /
• 2002

The behavioral and dynamic implications of an ERP implementation/installation are, to say the least, not well understood. Getting the switches set to enable the ERP software to go live is becoming straightforward. The really difficult part is understanding all of the dynamic interactions that accrue as a consequence. Dynamic causal and connectionist models are employed to facilitate an understanding of the dynamics and to enable control of the information-enhanced processes to take place. The connectionist model ran be analyzing (behind the scenes) the information accesses and transfers and coming If some conclusions about strong linkages that are getting established and what the behavioral implications of those new linkages and information accesses we. Ultimately, the connectionist model will come to an understanding of the dynamic, behavioral implications of the larger ERP implementation/installation per se. The underlying connectionist model will determine information transfers and workflow. Once a map of these two infrastructures is determined by the model, it becomes a relatively easy job for an analyst to suggest improvements in both. Connectionist models start with analog object structures and then use learning to produce mechanisms for managerial problem diagnoses. These mechanisms are neural models with multiple-layer structures that support continuous input/output. Based on earlier work performed and published by the author[10][11], a Connectionist ReasOning and LEarning System(CROLES) is developed that mimics the real-world reasoning infrastructure. Coupled with an explanation subsystem, this system can provide explanations as to why a particular reasoning structure behaved the way it did. Such a system operates in the backgmund, observing what is happening as every information access, every information response coming from each and every intelligent node (whether natural or artificial) operating within the ERP infrastructure is recorded and encoded. The CROLES is also able to transfer all workflows and map these onto the decision-making nodes of the organization.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.5
• /
• pp.243-250
• /
• 2002

In the synthesis of the current source distribution function of an array antenna with the arbitrary radiation pattern, the Woodward-Lawson sampling method has been mainly used for the synthesis of an even function lobe pattern. In this paper, the method is extended to the synthesis of the odd function pattern and then the optimum synthesis method for the nonlinear source distribution function is proposed. The proposed method is applied to the design of nonuniform transmission lines with arbitrary reflection responses. The both dispersive impedance profiles of single and coupled nonuniform lines with arbitrary reflection responses are directly synthesized by the sampled values of a reflected spectral pattern which is optimally shaped by a perturbation of its complex null positions, hence removing the conventional step-by-step segmentation process and global optimization routines. The control problem in the case that all of port impedances are identical is also solved. The generality of the proposed method is verified by a filter design with the controlled arbitrary passband

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.1-7
• /
• 2003

This paper presents a novel hybrid time-frequency-domain method for nonlinear soil-structure interaction(SSI) analysis. It employs, in a practical manner, a computer code for equivalent linear SSI analysis and a general-purpose nonlinear finite element program. The proposed method first (calculates dynamic responses on a truncated finite element boundary utilizing an equivalent linear SSI program in the frequency domain. Then, a general purpose nonlinear finite element program is employed to analyze the nonlinear SSI problem in the time domain, in which boundary conditions at the truncated boundary are imposed with the responses calculated in the previous frequency domain SSI analysis, In order to validate the proposed method, seismic response analyses are carried out for a 2-D underground subway station in a multi-layered half-space, For the analyses, a equivalent linear SSI code KIESSI-2D is coupled to ANSYS program. The numerical results indicate that the proposed methodology can be a viable solution for nonlinear SSI problems.

• Journal of Korea Soil Environment Society
• /
• v.1 no.2
• /
• pp.3-13
• /
• 1996

The efficiency of bioremedation can be measured by the enumeration of microorganism, respiration rate and decomposition rate. The side-effect can be measured by using Daphnia, oyster larvae and rainbow trout. Oxygen transfer could be a problem in the on-site treatment. For these, hydrogen peroxide can be used for solvents such as benzenes. Oleophilic nitrogen and phosphorus can be added for the treatment of oil pollution. Mixed microbial population or pure culture can be used for the inoculum. The pure culture used is Pseudomonas and Phanerochate. Sometimes enzymes are added and Photodegadation is coupled to increase the efficiency. For the treatment of oil pollution residue on soil such as waste lubrication oil and machine oil sludges, top soil of 15cm∼20cm depth is plowed and oil residue with approximately 5% concentration is applied. The optimum pH range is 7∼8, the ratio of phosphorus to hydrocarbon is 1:800. Appropriate drainage is necessary. For the treatment of marine oil pollution residue, addition of oleophilic fertilizer is effective. Air pollutiant such as oder can be treated by bioremediation. In this case, biofilters or biosrubbers are used for the reactor.

• Journal of Drive and Control
• /
• v.15 no.1
• /
• pp.28-37
• /
• 2018

When the wind speed rises above the rated wind speed, the produced power of the wind turbines exceeds the rated power. Even more, the excessive power results in the undesirable mechanical load and fatigue. A solution to this problem is pitch control of the wind turbines. This paper presents a systematic design method of a collective pitch controller for the wind turbines using a discrete fuzzy Proportional-Integral (PI) controller. Unlike conventional PI controllers, the fuzzy PI controller has variable gains according to its input variables. Generally, tuning the parameters of fuzzy PI controller is complex due to the presence of too many parameters strongly coupled. In this paper, a systematic method for the fuzzy PI controller is presented. First, we show the fact that the fuzzy PI controller is a superset of the PI controller in the discrete-time domain and the initial parameters of the fuzzy PI controller is selected by using this relationship. Second, for simplicity of the design, we use only four rules to construct nonlinear fuzzy control surface. The tuning parameters of the proposed fuzzy PI controller are also obtained by the aforementioned relationship between the PI controller and the fuzzy PI controller. As a result, unlike the PI controller, the proposed fuzzy PI controller has variable gains which allow the pitch control system to operate in broader operating regions. The effectiveness of the proposed controller is verified with computer simulations using FAST, a NREL's primary computer-aided engineering tool for horizontal axis wind turbines.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.250-256
• /
• 2014

EV(Electric Vehicle) has many benefits such as prevention of global warming and so on. But due to driving source changing from combustion engine to battery and e-motor, new R&D difficulties have arisen which changing of desired vehicle performance and multidisciplinary design constraints by means of strong coupled multi-physics domain problems. Additionally, dynamics performances of EV becomes more important due to increasing customer's demands and expectations for EV in compare with internal combustion engine vehicle. In this paper suggests model based development platform of EV through integrated simulation environment for improving analyse & design accuracy in order to solve multi-physics problem. This simulation environment is integrated by three following specialized simulation tools IPG CarMaker, AVL Cruise, DYMOLA that adapted to each purpose. Furthermore, control algorithm of TV(Torque Vectoring) system is developed using independent driven e-motor at rear wheels for improving handling performance of EV. TV control algorithm and its improved vehicle performances are evaluated by numerical simulation from standard test methods.

• Korea journal of population studies
• /
• v.34 no.2
• /
• pp.113-133
• /
• 2011

The generation of babyboomers has a significant impact on the socio-economic development of the society in general. The Korean Babyboomers will soon leave from their workforce as they reach the retirement age. This, coupled with the low fertility rate, may cause a serious social problem in the society at large as well as the social welfare issues among the Korean elderly population. The Central Statistical Systems have estimated the future projection which plays critical role to establish fundamental basis for the social and economic policies of the nation. This study examined the effect of the babyboomers on the life expectancy by comparing forecasted life expectancies provided by the statistical office and the previous studies in the related areas. The study also suggested a future population projection based on fertility rates provided, along with the changes of the number of babyboomers as they become ageing. The study results with the comparison between the population projection by the statistical office are provided.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.4
• /
• pp.437-448
• /
• 2000

In this study, a numerical analysis method for soil-pile interaction in frequency domain problem is presented. The total soil-pile interaction system is divided into two parts so called near field and far field. In the near field, beam elements are used lot a pile and plain strain finite elements for soil. In the far field, dynamic fundamental solution for multi-layered half planes based on boundary element formulation is adopted lot soil. These two fields are coupled using FE-BE coupling technique. In order to verify the proposed soil-pile interaction analysis, the dynamic responses of pile on multi-layered half planes are simulated and the results are compared with the experimental results. Also, various numerical analyses of piles considering different conditions of soil-pile interaction system are performed to examine the dynamic behavior of the system. It has been found that the developed method which satisfies the radiation conditions of multi-layered half planes can be applied to various structure systems effectively in frequency domain.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.343-349
• /
• 2012

Usage control models are the new breed of access control models that allow description of comprehensive policies for usage of protected content. In this paradigm, decisions regarding access to objects are not limited to request time only. It is coupled with the usage of the protected objects and becomes a continuous process carried out in parallel to the usage. The realization of usage control has been a long standing research problem to overcome the issue of loss of control in secure document dissemination. With the emergence of cloud computing, documents are stored in the cloud, the document viewers and editors themselves reside in the cloud and are accessed from thin clients such as browsers. We note that such scenarios provide an ideal opportunity for the realization of usage control for securing the usage of documents based on the stakeholders' policies. In this paper, we proposed Multimedia Content Management (MCM) for a better realization multimedia content in the cloud based applications. We designed a robust architecture to provide fine-grained control over usage of protected objects through the use of emerging cloud computing paradigm. We present the design principles for this realization and discuss our proposed architecture.