• Environmental and Resource Economics Review
• /
• v.15 no.2
• /
• pp.201-245
• /
• 2006

We applied general equilibrium model to analysis the economic impact of international emission trading by sector and the efficiency of the Convention to study whether Climate Change Convention satisfy the efficiency. We divided the world as 4 groups : USA, OECD members w/o USA (OEC), Former Soviet Union (FSU) and Developing countries (DEV). Compared to no trading, global trading would accomplish the same environmental effect with less cost as much as 97.8 billion$, which is the surplus of trading. However, half of it is taken by USA and 20% by OEC. FSU and DEV have only 18% and 10%. This result suggest the two things. First, the emission trading is effective as far as the participation of developing countries are guaranteed. If they do not take part in the coalition and emit the leakage, it may threaten the stability of the international trading coalition. Second, we found the logical ground of the side payment for developing countries. The permit buying countries take more share of the surplus under the emission trading, while the energy sector of developing countries shrinks to sell permits, which may adversely affect to economic growth of the countries. Therefore, the Annex-I countries need to provide side payment to lead the participation of the developing countries.

• Environmental and Resource Economics Review
• /
• v.21 no.3
• /
• pp.595-625
• /
• 2012

Recently environment-friendly pellet boilers have interests as emissions of greenhouse gases are regulated internationally and energy security becomes more important to oil addicted countries including Republic of Korea. But the Korean market for pellet boilers is on the initial stage due to the high production costs relative to other conventional boilers. Hence the Korean government has supported financially and promoted the pellet boiler business. In this sense, it would contribute market stratergy and effective promotion policy for both of the government and private companies if we can forecast market shares of pellet boilers appropriately. For this purpose, this study surveyed potential consumers' preferences on pellet boilers among various alternatives using a choice experiment reflecting intangible costs. As the market share of new technology increases, intangible costs decline. According to different intangible cost scenarios, we experimented people's preferences on oil, gas, electric, and pellet boilers. A multinomial logit model was employed to estimate coefficient parameters of common attributes for various alternative boilers. Based on the estimates, we forecasted market shares of individual boilers. We found that as intangible costs decline, the market share of pellet boiler increase substantically while market shares of electric and gas boilers decrease dramatically. The market share of oil boiler did not change significantly. Meanwhile, as people are more rich, more educated, and exposed to advertisement on pellet boilers, the likelihood of choosing the pellet boiler increases.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.863-870
• /
• 2012

The market trends of automatic meter reading associated with smart water meters were investigated. Also, recent developments and field applications of key technology for automatic meter reading associated with smart water meters were analyzed. Smart water meters have been manufactured mostly in United States and Europe and have been expanded their business to Asia. Integrated water management system combining with the additional functions such as real-time consumption metering, cost notification, water conservation, leak detection, water quality monitoring, and flow control have been operated in automatic meter reading. Both water quality and quantity data measured from smart water meters and sensors were transferred to data concentration units through neighborhood area network, and then were transferred to integrated server through wide area network. The data transfer methods were determined by comprehensively considering urban scale, density of smart water meters, power supply and network topologies. Common data collection methods such as fixed network to data concentation units, vehicles drive by, people walk by, and drone fly by have been applied. The automatic meter reading associated with smart water meters are spread throughout the world, and both water and energy savings result in saving the money and reducing the greenhouse gases emission.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.469-481
• /
• 2003

This study is to suggest strategies for the aquaculture of marine fishes in Korea through the analysis of current domestic states and case studies of the advanced countries to enhance the competitiveness of the industry. To reveal the current state, a questionnaire study to the producers was carried out, and cases in Norway, China, Japan, USA were analysed in terms of national development strategies. From those analyses, 3 strategies for the improvement of the competitive edge in the industry were induced as followings. First, it is necessary to implement restructuring such as upsizing through consolidation of small units, networking, etc. Second, it is required to introduce the state-of-the-art technology with the newly-designed equipments to save energy and cost in the operation. Third, it is also required to implement programs to select the national strategic species and concentrate R&D resources on the selected ones.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1009-1015
• /
• 2006

The elcetrodewatering filter press(EDFP) which had anode and cathod plates to be set between filter plates was built for reducing the waterworks sludge and improving performance of dewatering equipment. Several tests to compare the dewaterability with conventional mechanical filter press dewatering(MDEP) and EDFP was conducted through this equipment. As test results, filtration amount discharged from EDFP measured 43.2 kg which increased against MDFP, and cake weight measured 4 kg which was two times against MDFP. The water content of dewatered cake from EDFP was 55wt% and dewatering velocity was 2.3 $kg/m^2{\cdot}cycle$. This water content decrease 20% and dewatering velocity increased 30% with compare to the MDFP. That is to say, EDFP constructed from electrodewatering mechanism increase filtrate discharging amount, which make dewatering velocity increase and produce the low water content dewatered cake against MDFP. Energy consumption of EDFP is analysed to 400 kwh/DS ton. The results to analysis the economical aspect considering the power consumption and the handling cost decline as sludge volume reduction due to producing the low water content cake showed that expenses to handle sludge of 1 ton by dry solid base cut down on 20,000 won. If considering several test aspects, it was analysed that EDFP was excellent in the side of performance as well as economical suitability.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.66-75
• /
• 2016

Due to aggressive scaling of device sizes and reduced noise margins, physical defects caused by aging and process variation are continuously increasing. Additionally, with scaling limitation of metal wire and the increasing of communication volume, fault tolerant method in manycore network-on-chip (NoC) has been actively researched. However, there are few researches investigating reliability in NoC with voltage-frequency-island (VFI) regime. In this paper, we propose a table-based routing technique that can communicate, even if link failures occur in the VFI NoC. The output port is alternatively selected between best and the detour routing path in order to improve reliability with minimized hardware cost. Experimental results show that the proposed method achieves full coverage within 1% faulty links. Compared to $d^2$-LBDR that also considers a routing method for searching a detour path in real time, the proposed method, on average, produces 0.8% savings in execution time and 15.9% savings in energy consumption.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.6
• /
• pp.693-700
• /
• 2012

In this study, the Charpy impact test along with metallurgical observation was conducted to evaluate low temperature impact toughness of structural steel welds with different welding processes to find out the optimal welding process to guarantee the required impact toughness at low temperatures. The welding processes employed are shield metal arc welding (SMAW) and flux cored arc welding(FCAW), which are commonly used welding methods in construction. The Charpy impact test is a commercial quality control test for steels and other alloys used in the construction of metallic structures. The test allows the material properties for service conditions to be determined experimentally in a simple manner with a very low cost. To investigate the impact toughness at low temperatures of the steel welds, specimens were extracted from the weld metal and the heat affected zone. Standard V-notch Charpy specimens were prepared and tested under dynamic loading condition. The low temperature impact performance was evaluated based on the correlation between the absorbed energy and the microstructure. Analysis of the results showed that the optimal welding process to ensure the higher low temperature impact toughness of the HAZ and the weld metal is SMAW process using the welding consumable for steels targeted to low temperature use.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2011

The parking guidance system can increase driver's convenience with detailed parking information service, but it continuously consumes electrical energy with large amount of sensors, displays and control modules. With the increase of the demand for green and sustainable building design, it becomes a meaningful issue for parking guidance system to reduce operating power. This paper presents the preliminary design and estimated results of a parking guidance system which is optimized to reduce the power consumption mainly on detectors and displays. The system design is based on commercial wireless parking detectors, wireless-loop-detector and earth-magnetic-detector. We have performed system architecture design, communication network design, parking information service scenario planning, battery life regulation and at last operating power estimation. With the 7 years of battery replace cycle, the estimated result for power consumption of designed system was 0.33W/slot, which is 13% of the traditional system's estimation result. The estimated annual maintain cost was similar to the traditional ultrasonic sensor based system's. The low power operable designed system can be expected to reduce CO2 emission.

• Journal of Nutrition and Health
• /
• v.43 no.1
• /
• pp.57-68
• /
• 2010

Worksite health promotion programs have been associated with reductions in health risks but are labor-intensive and costly to implement. Therefore, innovative strategies to provide a cost-effective approach to health education program are needed. The purpose of this study was to investigate the effects of a worksite on-line health education program by email on metabolic syndrome risk factors and dietary intakes in male workers with metabolic syndrome. Anthropometric and biochemical parameters were measured and the nutrient intakes were assessed through FFQ. The diagnosis of metabolic syndrome was adapted from NCEP-ATP III with blood pressure, fasting blood glucose, triglyceride, HDL cholesterol, and Asia-Pacific definition with waist circumference. The education group consisted of 212 male workers and the non-education group of 236 age-matched male workers. The on-line health education program provided 10 sessions by e-mail. After a worksite on-line health education program, systolic blood pressure (p < 0.001), diastolic blood pressure (p < 0.001) and fasting blood glucose (p < 0.001) were significantly decreased and HDL cholesterol (p < 0.001) was significantly increased in the education group. Intakes of total energy (p < 0.05), carbohydrate (p < 0.05), sodium (p < 0.05) were significantly decreased in the education group, but there were no significant differences in dietary intakes in the non-education group after a worksite on-line health education program. The results indicate that online health education program by e-mail is effective for improving metabolic syndrome risk factors and dietary intakes in male workers and show potential for use in the working setting.

• Journal of Digital Contents Society
• /
• v.12 no.1
• /
• pp.23-32
• /
• 2011

For the past few years, unlike wireless widespread United States and Japan, expensive cost and platform of the mobile web carrier underground and self-centered made achievement of domestic mobile web market sluggish. Nowadays, more and more people pay attention to the mobile web service because of the increased quality of wireless internet, development of mobile device and variety of the flat-rate payment system. However, another big problem is that mobile web is too hard to use. Also, the poor content of mobile web service is an extremely serious problem. In this paper, we put forward a new method for easy to access mobile web service which is use WINC expansion numbers and users can use these numbers to shit their own website. Along with the benefits of purchase WINC number general users are able to make website and control their website at less time and energy.