• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.3
• /
• pp.63-70
• /
• 2010

Based on the known results of the expected busy periods for the triadic Min (N, T, D) and Max (N, T, D) operating policies applied to a controllable M/G/1 queueing model, a relation between them is constructed. Such relation is represented in terms of the expected busy periods for the simple N, T and D, and the dyadic Min (N, T), Min (T, D) and Min (N, D) operating policies. Hence, if any system characteristics for one of the two triadic operating policies are known, unknown corresponding system characteristics for the other triadic operating policy could be obtained easily from the constructed relation.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.48.2-48.2
• /
• 2020

We present a new void definition that connects voids with clusters, the high-density counterpart. We use a pair of ΛCDM simulations whose initial density fields are sign inverted versions to each other, and study the relation between the effective void volume and the corresponding cluster mass. Massive cluster halos (M ≥ 1013M⊙/h) are identified in one simulation at z=0 by linking dark matter particles. The corresponding void to each cluster is defined in the other simulation as the region occupied by the member particles of the cluster. We find a universal functional form of density profiles at z=0 and 1. We also find a power-law relation between the void effective radius and the corresponding cluster mass. Based on these findings, we identify cluster-counterpart voids directly from a density field without using the pair information by utilizing three parameters such as the smoothing scale, density threshold, and minimum core fraction. We identified voids corresponding to clusters more massive than M ≥ 3 × 1014M⊙/h at approximately 70-74 \% level of completeness and reliability. Our results suggest that we can detect voids comparable to clusters of a particular mass-scale.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.3
• /
• pp.321-332
• /
• 1998

The purpose of this study is to provide basic data for more functional and more fitting clothing construction. The subjects were college women aged from 18 to 25 in June, 1997. Data were collected by anthropometry and photometry and analyzed by the characteristic of the upper body- The results are as follows: 1. After analyzing direct anthropometric data, 1 have analyzed the data by the characteristic in each somatotype, classified them and I have had 5 groups. Group 1 with middle height and standard type, group 2 with great height and standard type, group 3 with low height and slim type, group 4 with middle height and fat type, and group 5 with low height and a little fat type. 2. After analyzing indirect photometric data, 1 have analyzed them by the characteristic and I have had 4 groups. Group 1 with lean back type, group 2 with sway back type, group 3 with straight type and group 4 with bend forward type. 3. Through the mutual corresponding relation in the 5 groups classified with direct anthropometric measurement and the 4 groups classified with indirect photometric mea- surement, direct-group 1 comes the most corresponding to indirect-group 2, comes second to indirect-group 4, and comes third to indirect-group 1. Direct-group 2 comes the most corresponding to indirect-group 4, direct-group 3 comes the most corresponding to indirect- group 1, direct-group 4 comes the most corresponding to indirect-group 3, and direct-group 5 comes the most corresponding to indirect-group 1.

• Honam Mathematical Journal
• /
• v.40 no.4
• /
• pp.601-610
• /
• 2018

In the present paper, we construct an ordered regular equivalence relation on an ordered semihyperring by 2-hyperideals such that the corresponding quotient structure is also an ordered semihyperring.

• Journal of Information Processing Systems
• /
• v.11 no.2
• /
• pp.184-204
• /
• 2015

Fuzzy Formal Concept Analysis (FCA) is a mathematical tool for the effective representation of imprecise and vague knowledge. However, with a large number of formal concepts from a fuzzy context, the task of knowledge representation becomes complex. Hence, knowledge reduction is an important issue in FCA with a fuzzy setting. The purpose of this current study is to address this issue by proposing a method that computes the corresponding crisp order for the fuzzy relation in a given fuzzy formal context. The obtained formal context using the proposed method provides a fewer number of concepts when compared to original fuzzy context. The resultant lattice structure is a reduced form of its corresponding fuzzy concept lattice and preserves the specialized and generalized concepts, as well as stability. This study also shows a step-by-step demonstration of the proposed method and its application.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.475-482
• /
• 2002

A moment-curvature relationship to simulate the behavior of reinforced concrete (RC) columns under cyclic loading is introduced. Unlike previous moment4curvature models and the layered section approach, the proposed model takes into account the bond-slip effect by using a monotonic moment-curvature relationship constructed on the basis of the bond-slip relation and corresponding equilibrium equation at each nodal point. In addition, the use of curved unloading and reloading branches inferred from the stress-strain relation of steel gives more exact numerical result. The pinching effect caused by axial force is considered with an assumption that the absorbing energy corresponding to any deformation level maintains constant regardless of the magnitude of applied axial lone. The advantages of the proposed model, comparing to layered section approach, may be on the reduction in calculation time and memory space in case of its application to large structures. Finally, correlation studies between analytical result and experimental studies are conducted to establish the validity of the proposed model.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.3-11
• /
• 2002

A moment-curvature relationship to simulate the behavior of reinforced concrete (RC) columns under cyclic loading is introduced. Unlike previous moment-curvature models and the layered section approach, the unposed model takes into account the bond-slip effect by using a monotonic moment-curvature relationship constructed on the basis of the bond-slip relation and corresponding equilibrium equation at each nodal point. In addition, the use of curved unloading and reloading branches inferred from the stress-strain relation of steel gives more exact numerical result. The pinching enact caused by axial force is considered with an assumption that the absorbing energy corresponding to any deformation level maintains constant regardless of the magnitude of applied axial force. The advantages of the proposed model, comparing tn layered section approach, may be on the reduction in calculation time and memory space in case of its application to large structures.. Finally, correlation studies between analytical results and experimental studies are conducted to establish the validity of the proposed mood.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.660-665
• /
• 2003

The true stress - true strain relation of SA508 steel was evaluated with analytical and experimental equation on the base of the indentation load-depth curve obtained from the modeling of ball indentation test. The evaluated relation between true stress and true strain is agreed well with that of SA508 teel defined in the modeling. The distribution of effective stress along the center axis of indentation depth was calculated with Tresca criteria in the modeling. The representative strain, which are defined in this study as the corresponding strains obtained from the maximum effective stress, have a linear relation with the true strain. The true stress - true strain relation of austenitic stainless steel was evaluated by the modeling of ball indentation test to verify the case of A508 steel.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 2001.12a
• /
• pp.166-178
• /
• 2001

Lately the National Technology Standard of IMT-2000 service in Korea was decided for both technology standards (cdma-2000, W-CDMA), and consequently the comprehensive countermeasures against the Technology Standards are all the more emphasized. Especially to private enterprises which were selected as service carriers for IMT-2000 service in Korea, making corresponding strategies in relation to both technology standards must be settled without delay. The Government also should serve the development of the I&T Industry through the various processes of adopting the policies and working out strategies In relation to Technology Standards of IMT-2000. Therefore in this paper, 1 would like to survey the features of both Technology Standards(cdma-2000, W-CDMA) and to propose the hereafter corresponding strategies in relation to IMT-2000 services.

• Journal of applied mathematics & informatics
• /
• v.3 no.1
• /
• pp.65-78
• /
• 1996

The properties of a toric variety have strong connection with the combinatorial structure of the corresponding fan and the rela-tions among the generators. Using this fact we have described explic-itly the Chow ring for a Q-factorial toric variety as the Stanley-Reisner ring for the corresponding fan modulo the linear equivalence relation. In this paper we calculate the Chow ring for 3-dimensional Q-factorial toric varieties having one bad isolated singularity.