• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1326-1329
• /
• 1995

An influences of gap clearance, pressure and applied voltage shape on breakdown characteristics are investigated by using a rod-to-plane electrode in $SF_6$ gas. In case of D.C and A.C, a corona stabilization effect increases the breakdown voltage remarkably for lower pressure than 0.2MPa, whereas incase of negative D.C this effect exists independently of gas pressure. This suggests that an insulation optimization in a pratical apparatus is needed to prevent a corona appearance through the removal of local field enhancement.

• Journal of the Korean Society of Safety
• /
• v.23 no.4
• /
• pp.42-46
• /
• 2008

Ionizers are essential in various areas of manufacturing industries to protect electrostatic hazards and to reduce inferior products. For ion sources used in the charge neutralizers, there are corona discharge, soft X-ray, ultraviolet and glow discharge. Glow discharge has lots of attractive properties, such as lower discharge sustaining voltage, no generation of ozone, and so on. In this paper, we did an experimental study to trace the mechanism and stabilization of atmospheric pressure glow discharge using the several size and shape of electrodes. As an experimental result, to sustain conditions of atmospheric pressure glow discharge is that discharge voltage is 360V, discharge current is 12mA, apply frequency is 1kHz between electrodes when positive electrode is molybdenum(Mo) and negative electrode is copper(Cu). We confirmed that the mechanism and stabilization of atmospheric glow discharge is deeply concerned with the shape and material of electrode for discharge. Especially, glow discharge in atmospheric pressure was well generated and sustained according with the physical properties used electrode materials, example melting point, thermal conductivity, and etc.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.645-647
• /
• 1993

Surface breakdown characteristics are investigated under metallic-particle contaminated conditions in $SF_6$ gas. The main results show that a rib increases breakdown voltage by a corona stabilization effect and the elongation of discharge path. The breakdown voltage at higher pressures than 4 atm may be estimated on the basis of mean breakdown field strength($E_{BD}$) and discharge length(L) which depend on gas pressure and surface shape.

• Journal of Digital Convergence
• /
• v.18 no.9
• /
• pp.103-112
• /
• 2020

The purpose of this study is to examine the current status and components of Korean National Debt and to analyze the effects of each component on National Debt. In the Korean Statistical Information Service (KOSIS), we searched for data such as General Accounting Deficit Conservation, For Foreign Exchange Market Stabilization, For Common Housing Stability, Local Government Net Debt Public Funds, etc that constitute National Debt. The analysis period used a total of 23 annual data from 1997 to 2019. The data collected in this study use the rate of change compared to the previous year for each component. Using this, this study attempted index analysis, numerical analysis, and model analysis. Correlation analysis result, the National Debt has a high relationship with the For Common Housing Stability. For Foreign Exchange Market Stabilization, Public Funds, etc., but has a low relationship with the Local Government Net Debt. Since 1997, National Debt has been increasing similarly to the For Foreign Exchange Market Stabilization, For Common Housing Stability and Public Funds etc. Since 2020, Korea is expected to increase significantly in terms of For Common Housing Stability and Public Funds, etc due to Corona19. At a time when the global economic situation is difficult, Korea's National Debt is expected to increase significantly due to the use of national disaster subsidies. However, if possible, the government expects to operate efficiently for economic growth and financial market stability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.339-340
• /
• 2006

AC spark discharge voltage of SF6/CO2and SF6/N2 containing various mixed rate in volume percent (1, 5 and 10%) of SF6 in non-uniform fields are investigated. The needle to plane electrode gap spacing was 5 and 10 mm, and the gas pressure was varied within the range of 0.1~0.7 MPa. We have observed a N-characteristic typical for the electronegative gases even in gas mixtures of 1% SF6 with CO2 and N2 as buffer gases. Especially, the materials of the needle electrode affect the insulation properties of the gas mixtures drastically. On the contrary to the case of needle electrodes made by mild steel or high carbon steel, the N-characteristics are hardly perceived in the case of stainless steel needle in this experiment.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.198-199
• /
• 2006

AC spark discharge voltage of SF6/C02and SF6/N2 containing various mixed rate in volume percent (1, 5 and 10%) of SF6 in non-uniform fields are investigated. The needle to plane electrode gap spacing was 5 and 10 mm, and the gas pressure was varied within the range of 0.1${\sim}$0.7 MPa. We have observed a N-characteristic typical for the electronegative gases even in gas mixtures of 1% SF6 with CO2 and N2 as buffer gases. Especially, the materials of the needle electrode affect the insulation properties of the gas mixtures drastically. On the contrary to the case of needle electrodes made by mild steel or high carbon steel, the N-characteristics are hardly perceived in the case of stainless steel needle in this experiment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.245-251
• /
• 2008

Although many studies have been carried out about binary gas mixtures with $SF_6$, few studies were presented about breakdown characteristics of $SF_6/CF_4$ mixtures. At present study the breakdown characteristics of $SF_6/CF_4$ mixtures in non-uniform field was performed. The experiments were carried out under AC voltage and standard lightning impulse(SLI) voltage. Breakdown characteristics were investigated for $SF_6/CF_4$ mixtures when AC voltages and standard lighting impulse voltage was applied in a needle-plane. The needle-plane electrode whose gap distance was 3 mm were used in a test chamber. $SF_6/CF_4$ mixtures contained from 0 to 100% $SF_6$ and the experimental gas pressure ranged from 0.1 to 0.5 MPa. The breakdown characteristics of $SF_6/CF_4$ mixtures in non-uniform field may be influenced by defects like needle-shaped protrusions. In case of slowly rising SLI voltage and AC voltage it is enhanced by corona-stabilization. This phenomena caused by the ion drift during streamer development and the resulting space-charge is investigated. In non-uniform field under negative SLI voltage the breakdown voltage was increase linearly but under positive SLI voltage the breakdown voltage increase non-linearly. The breakdown voltage in needle-plane electrode displayed N shape characteristics for increasing the content of $SF_6$ at AC voltage. $SF_6/CF_4$ mixture has good dielectric strength and arc-extinguishing properties than pure SF6. This paper presents experimental results on breakdown characteristics for various mixtures of $SF_6/CF_4$ at practical pressures. We could make an environment friendly gas insulation material with maintaining dielectric strength by combing $SF_6\;and\;CF_4$ which generates a lower lever of the global warming effect.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.77-86
• /
• 2020

The study aims to analyze the compliance and non-compliance of the Korean health authorities regarding WHO's mask use recommendations following the spread of Covid-19, and to suggest the limitations and implications of the recommendations in the prevention of epidemics by deriving the causes of non-compliance with the results of alternative options. To this end, documents related to masks at home and abroad are reviewed, and WHO's mask recommendations and the Korean health authorities' mask guidelines are targeted for analysis. The analysis results are as follows. First, Korea's health authorities have basically accepted and applied WHO's "limited mask user perspective" in two recommendations. Second, Korea's health authorities have implemented differently from WHO mask recommendations due to the lack of supply and demand of masks. Third, Korea's health authorities were able to succeed in the initial prevention of Corona 19 based on the stabilization of the mask supply. Fourth, in the WHO mask recommendations, mask user restriction resulted in partial errors as a recommendation. The implication derived from the analysis is that even international recommendations based on medical evidence need to be allowed to follow autonomous guidelines according to the country's quarantine situation and competence, rather than strict adherence to international rules, in the infectious disease pandemic situation.