• 제목/요약/키워드: corner block

검색결과 47건 처리시간 0.021초

Corner outlier 제거를 위한 후처리 기법 (Post-Processing for Reducing Corner Outliers)

  • 홍윤표;전병우
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
    • /
    • pp.11-14
    • /
    • 2003
  • In block-based lossy video compression, severe quantization causes discontinuities along block boundaries so that annoying blocking artifacts are visible in decoded video imases. These blocking artifacts significantly decrease the subjective image quality. In order to reduce the blocking artifacts in decoded images, many algorithms have been proposed However studies on so called, corner outliers, have been very limited. Corner outliers make image edges look disconnected from those of neighboring blocks at cross block boundary. In order to solve this problem, we propose a corner outlier detection and compensation algorithm as post-processing in spatial domain The experiment results show that the proposed method provides much improved subjective image quality.

  • PDF

조립식(組立式) 탁자(卓子)의 CBA접합부(接合部) 강성(剛性)에 관(關)한 연구(硏究) (A Study on the Stiffness of CBA(Corner Block with Anchor Bolt) Joint in Knockdown Type Table Furniture)

  • 정우양;이필우
    • Journal of the Korean Wood Science and Technology
    • /
    • 제17권2호
    • /
    • pp.34-64
    • /
    • 1989
  • 포장(包裝) 용적(容積) 감소에 따른 수송비(輸送費) 절감(節減) 효과(效果)가 있어 조립시(組立式) 탁자류(卓子類) 가구(家具)의 제작(製作)에 널리 쓰이는 CBA(corner block with anchor bolt) 접합방식(接合方式)은 일정기간(一定期間) 사용(使用)함에 따라 접합부위(接合部位)가 약해지고 그 결과(結果) 구조(構造)가 불안정(不安定)하게 되는 반강접합(半剛接合)(semi-rigid joint) 특유(特有)의 결점(缺點)도 지니고 있다. 따라서 본(本) 연구(硏究)에서는 CBA 접합(接合) 강도(强度)에 영향하는 주요(主要) 설계(設計) 인자(因子)로서 side rail 규격, corner block의 side rail에의 부착시(時) 보강재(補强材)의 효과(效果) 및 corner block관통 anchor bolt의 사용(使用) 수(數) 그리고 corner block의 형태등(等)의 평가(評價)를 하기 위해 22개(個)의 접합군(接合群) 별(別)로 총(總) 88개(個)의 table section 시험체(試驗體)를 제작(製作)한 후(後)그들의 강성(剛性) 계수(係數)(Z - 값) 및 유효강도(有效强度)를 수평 하중(荷重)에 의한 변형측정(變形測定) 실험(實驗)을 통해 결정(決定)한 후 설계(設計) 인자별(因子別) 효과(效果)를 비교 분석(分析)하였다. 분석결과(分析結果), side rail의 높이 증대(增大) 및 corner block 부착시(時) PVAc 수지(樹脂)의 사용효과(使用效果)가 뚜렷하여 유효강도(有效强度)의 유의적(有意的) 향상(向上)을 나타냈고 anchor bolt의 효과(效果) 역시 2개 사용시(使用時)가 1개 사용시(使用時) 보다 훨씬 큰 것으로 나타났다. 또 side rail 높이 와 anchor bolt 사용(使用) 수(數)간에는 상호작용(相互作用) 효과(效果)도 있었다. 그러나 side rail의 두께 효과(效果)는 22mm에서 25mm로 증대(增大)시켰을때 뚜렷한 상승 경향(傾向)은 보여주지 못했다. 한편 corner block의 형태는 MDF를 주재료(主材料)로 사용(使用)한 탁자(卓子) 설계시(設計時)는 두께 25mm, 높이 100mm의 side rail에 PVAc 수지(樹脂)로 보강(補强)하고 mitered corner block에 2개(個)의 anchor bolt를 관통시킨 경우가 유효강도(有效强度) 3171.7 kgf-cm로 22개의 접태군(接台群)들 중 최대치(最大値)를 나타냄으로써 miter type이 rectangular type보다 바람직한 것으로 나타났다. 결론적(結論的)으로 자재(資材)의 효과적(效果的) 이용(利用)을 통한 생산비(生産費) 절감(節減)과 동시(同時)에 구조(構造)의 안정(安定)된 강도적(强度的) 측면(側面)을 고려할 때, 두께 22mm, 높이 75mm의 MDF side rail에 mitered corner block을 PVAc 수지(樹脂)와 나사못을 이용하여 부착한 후(後) 2개(個)의 anchor bolt를 관통시키는 방법(方法)을 가장 합리적(合理的)인 MDF 사용(使用) 조립시(組立式) 탁자(卓子) 설계(設計) 방안(方案)으로 제시(提示)하는 바이다.

  • PDF

표 서식 문서의 구조 분석을 위한 선분 에지 기반의 유형별 꼭짓점 검출 (Line Edge-Based Type-Specific Corner Points Extraction for the Analysis of Table Form Document Structure)

  • 정재영
    • 디지털콘텐츠학회 논문지
    • /
    • 제15권2호
    • /
    • pp.209-217
    • /
    • 2014
  • 표 서식을 활용하고 있는 수많은 문서들을 종류에 따라 자동으로 분류하거나, 서식에 기입된 정보를 서식과 분리하여 추출하는 기술은 매우 중요하게 활용된다. 이를 위해서는 표 서식 구조를 정확하게 파악하는 과정은 필수적이다. 본 논문에서는 표 서식 문서 영상에 대한 유형별 꼭짓점 검출 방법을 제안한다. 주요 처리 과정은 전처리, 에지 블록 검출, 선분 에지 블록 검출, 꼭짓점 검출 단계를 거친다. 추출된 꼭짓점들은 선분 에지들이 다양한 형태로 직교하는 교차점들로 9가지 유형으로 분류된다. 실험에서는 제안한 방법을 세금계산서, 거래명세표, 표를 포함하고 있는 일반 문서 등과 같은 몇 가지 형태의 영상에 적용하여 99% 이상의 유형별 꼭짓점 추출 성능 결과를 보인다. 서식 문서 내에서의 대부분의 꼭짓점들은 대칭 형태로 존재한다는 사실을 고려할 때, 꼭짓점의 유형, 선분 에지의 폭 및 그들의 위치 관계를 활용하여 서식의 구조 분석에 활용 가능하다.

모형수조 슬로싱 하중을 이용한 LNG 탱크 코너블럭(Corner Block) 구조물의 구조강도 평가 (The Evaluation of Strength for the Corner Block Structure in the LNG Tank using Sloshing Pressure of the Scaled Tank)

  • 박준형;박시종;김성훈;최재민;전인기
    • 한국전산구조공학회논문집
    • /
    • 제26권5호
    • /
    • pp.327-333
    • /
    • 2013
  • 이 연구의 목적은 축소된 탱크 모델에서 측정되어진 슬로싱 압력을 이용하여 실제 크기의 탱크 모델에서의 압력을 예측하는 것이며, 또한 예측된 압력으로 LNG 코너 블럭의 슬로싱 하중에 의한 구조 강도를 평가하는 것이다. 이 목적을 위하여, Ansys CFX 프로그램을 이용하여 138K급 LNG 화물창 시스템의 크기 비율에 따른 슬로싱 해석을 수행 하였으며, 크기 비율에 따른 슬로싱 평균 압력 및 최대 피크 압력을 측정하였다. 또한, 측정된 압력은 프루드 법칙에 의해 실제 138K 크기의 압력으로 변환하여 실선 크기의 KC-1 코너블럭에 대한 구조강도 평가를 수행하였다.

Fast Detection of Copy-Move Forgery Image using DCT

  • Shin, Yong-Dal
    • 한국멀티미디어학회논문지
    • /
    • 제16권4호
    • /
    • pp.411-417
    • /
    • 2013
  • In this paper, we proposed a fast detection method of copy-move forgery image based on low frequency coefficients of the DCT coefficients. We proposed a new matching criterion of copy-moved forgery image detection (MCD) using discrete cosine transform. For each $8{\times}8$ pixel block, the DCT transform is calculated. Our algorithm uses low frequency four (DC, 3 AC coefficient) and six coefficients (DC, 5 AC coefficients) of DCT per $8{\times}8$ pixel block. Our algorithm worked block matching for DCT coefficients of the $8{\times}8$ pixel block is slid by one pixel along the image from the upper left corner to the lower right corner. Our algorithm can reduce computational complexity more than conventional copy moved forgery detection algorithms.

Corner Outlier Artifacts를 감소시키기 위한 HEVC 필터링 방법 (The Filtering Method to Reduce Corner Outlier Artifacts in HEVC)

  • 고경환;이영렬
    • 방송공학회논문지
    • /
    • 제22권3호
    • /
    • pp.313-320
    • /
    • 2017
  • HEVC 표준에 적용된 인루프 필터링 방법인 De-blocking filter와 SAO(Sample Adaptive Offset)은 영상의 블록화 현상(Blocking artifacts)과 ringing artifacts를 효과적으로 제거하여 부호화 효율 및 주관적 화질 향상을 달성하였다. 하지만, 인루프 필터링 사용에도 불구하고, Corner outlier artifacts라 불리는 블록 경계의 모서리 부분에서 발생하는 2차원 형태의 블록화 현상은 쉽게 제거하지 못하는 문제점을 보인다. 본 논문에서는 Corner outlier 픽셀 탐색 및 판단과정, 해당 outlier 픽셀의 필터링 방법을 통하여 이러한 artifacts를 감소시키는 방법을 제안한다. 실험결과, 제안하는 방법은 화면간 예측에서 약간의 압축 효율 향상을 보였으며, 특히 영상의 주관적 화질 측면에서 개선된 효과를 나타내었다.

역세권 제2종 일반주거지역 상업화 확산과 특성 분석 (A Study on the Commercialization Characteristics of 2nd Class Residential District in Inner-city Railway Station Area)

  • 윤용석;양우현
    • 한국주거학회논문집
    • /
    • 제23권2호
    • /
    • pp.25-36
    • /
    • 2012
  • The purpose of this study is to find out the commercialization characteristics of 2nd class residential district in innercity railway station area as basic research to protect urban residential area against the pressure of commercialization. Through the research that are based on literature, field survey and urban planning map, it analysed the commercialization characteristic of selected three sites under similar urban condition; to be a nearby subway station and to be a famous commercial street in site, etc. The consequences of this study are summarized as follows; First it finds the commercialized lots in all blocks that adjoin blocks of upper class zoning. Second it is in inverse proportion between the commercialization of lots and the distance from subway station to residential block. Third, the corner lot of a block and the access road directly connected collector road are very important factors to spread commercialization to residential area. Finally, it finds the difference of the commercialization degree of 2nd class residential zone according to arrange main commercial street and the 2nd class residential block; vertical arrangement and horizontal arrangement.

돈암지구 가구(街區)의 형성과 도시한옥의 적응 (Formation of Don-am district and Adaptation of Hanok Area in Seoul)

  • 이경욱;김영수;송인호
    • 건축역사연구
    • /
    • 제30권5호
    • /
    • pp.29-42
    • /
    • 2021
  • The Don-am district is a residential area that was supplied in 1936 as a land readjustment project(Tojiguhoekjeongri). The Don-am district was newly supplied with residential areas and urban hanoks were built in large numbers. The Don-am district was influenced by urban planning and legislation at that time. These affected in the layout and plan of urban hanok. Residential block in the Don-am district were developed sequentially from the late 1930s to the 1960s. Residential block were divided by modern construction company and sold by individual lots. The blocks supplied to the Don-am district made uniformly the corner out-off(Ga gak) for creating a vehicle-centered road. So urban hanoks located in the corner plot was transformed in response to the road. Residential blocks in Don-am district was divided into three to four rows. Therefore, alleys were created inside the block. Newly made alleys consist of a privately owned road(Sa-do), a public road(Gong-Do), and open space in the site. And the alleys were used as an entry space for sharing with neighboring. Urban hanoks of Don-am district have had changed and adapted to the formation of these alleys.

도시거점내 제2종 일반주거지역 상업화 확산과 원인 분석 (A study on the commercialization cause of 2nd class residential area in urban center)

  • 윤용석;양우현
    • 한국주거학회:학술대회논문집
    • /
    • 한국주거학회 2011년도 춘계학술발표대회 논문집
    • /
    • pp.147-152
    • /
    • 2011
  • The purpose of this study is to find out the commercialization cause of 2nd class residential area in urban center as basic research to protect urban residential area against the pressure of commercialization. Through the research that are based on literature, field survey and urban planning map, it analysed the commercialization cause of selected two sites under similar urban condition ; to be a nearby subway station and to be a famous commercial street in site, etc. The consequences of this study are summarized as follows ; First the distance between subway station and residential block and residential commercialization are in inverse proportion each other. Second, the corner lot of a block and the access street directly connected collector street are very important factors to spread commercialization to residential area. Finally, nevertheless first and second results, there is square zone which is very high rate of commercialization within one regardless the distance between subway and residential block. the maximum range of square zone is assumed about 250 meter based on case study.

  • PDF

모서리 잡음 제거를 위한 Loop 필터링 기법 (Loop-Filtering for Reducing Comer outlier)

  • 홍윤표;전병우
    • 대한전자공학회논문지SP
    • /
    • 제41권5호
    • /
    • pp.217-223
    • /
    • 2004
  • 블록 기반의 손실 영상 압축 방식에서는 블록마다 다른 양자화 오류로 인하여 블록 경계를 따라 불연속성이 나타날 수 있다. 이러한 블록화 현상은 압축률이 높아질수록 심각하여 화질에 큰 영향을 미친다. 이러한 블록화 현상을 막기 위해 많은 알고리즘들이 제안되었다 그러나 블록화 현상에 대한 연구 중 모서리 잡음이라고 불리는 현상에 대한 연구가 미진하였다. 모서리 잡음은 블록 경계가 교차하는 지점에서 영상 경계가 불연속적으로 나타나게 되는 것을 말한다. 본 논문에서는 블록 기반영상 압축방식에서 발생하는 모서리 잡음의 발생과정과 특성을 분석하고 이 문제를 해결하기 위한 검출과 제거 알고리즘을 제안한다. 실험 결과는 제안 방법이 주관적 화질을 향상시키는 것을 보여준다.