• Near Infrared Analysis
• /
• v.1 no.2
• /
• pp.21-27
• /
• 2000

Temperature-dependent changes in near-infrared (NIR) spectra have been measured for oleic acid, and nonanoic acid in the pure liquid state. Particular attention has been paid to the 5400-4800 cm$\^$-1/ region where a number of combination bands appear. The NIR spectra of oleic acid show that a band at 5303 cm$\^$-1/ increases with temperature while that at 5270 cm/sup-1/ decreases. It ha been found from their second derivative spectra that these spectral changes take place stepwisely with two break points at 30 and 53$\^{C}$, which correspond to the phase transition temperatures oleic acid reported previously. Principle component analysis (PCA) has been carried out for the NIR spectra of oleic acid in the 5400-4800 cm$\^$-1/ region measured over a temperature range of 15-80$\^{C}$. core plots of the first and second principal components (PCs) show that the NIR spectra are classified into three groups; the spectra measured in the temperature range of 15-30$\^{C}$, those in the range of 31-53$\^{C}$, and those in the range of 54-80$\^{C}$. These temperature ranges correspond to those for quasi-smectic liquid crystal, disordered liquid crystal, and isotropic liquid of oleic acid in the pure liquid state. In other words, PCA provides unambiguous evidence for the phase transitions. similar studies have been carried out for petroselinic acid and nonanoic acid in the pure liquid states, but they do not show any evidence for phase transitions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.231-234
• /
• 2007

The magnetic sensor using electromagnetic principle. which transfers magnatic into electric. is the electric component.It has been widely applied to the industry, university and the reseach. However there are some problems. Not only the korean domestic sensor manufacture skills are still lower then the advanced manufacture's but also production of sensor is not well organized yet. Due to cahnging excitation cvurrent, excitation freq and the rate magnetic permeability core, there sometimes would be distorted phenomena or loaded phenomena which result in limited measurment range. Therefore, the signal conversion device should support to receive undistorted and nice output. This paper focuses on both the design of signal transform circuit using inductive proximity sensor and the signal transfer equipment (Z device) which detects thickness of painted material.

• Journal of Korean Society for Quality Management
• /
• v.35 no.3
• /
• pp.37-46
• /
• 2007

Our society is increasingly dependent on the Internet, and this trend will be accelerating in the ear of All-IP convergence. As the core infrastructure of the All-IP convergence, the next generation Internet should enable end-to-end Quality of Service(e2e QoS). For that purpose, major international standardization institutes such as ITU(International Telecommunication Union) and IETF(Internet Engineering Task Force) are building the concept and architecture of the Next Generation Network(NGN). However, these institutes focus only on technical issues, and leave many business/policy-oriented challenges unresolved. For example, the standards raised by ITU assume that the entire service delivery process for e2e QoS services is perfectly working. But required is a standardized business interface and process for seamless inter-operations across many stakeholders including ISPs(Internet Service Providers), CPs(Content Providers), so on. On the other hand, TMF(TeleManagement Forum) and QuEST(Quality Excellence for Suppliers of Telecommunication) Forum, global consortiums of telecom operators and vendors, present sets of interface rules and process which playa crucial role as de facto standards: for example, NGOSS/eTOM and TL9000 authorization system. However, these standards focus on telephone services, and provide little principle for the next generation Internet. Our study seeks a way to combine these two strains for a successful implementation of NGN. In particular, we find a missing link in the NGN architecture and the elements that could be complemented with the help of NGOSS/eTOM and TL9000. Finally, presented is a strategic direction that our standardization policy should purse in order to reinforce our global leadership for the next generation Internet.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.1
• /
• pp.21-26
• /
• 2013

This study presents new analysis method to predict bending behavior of packaging substrate structure by comparing finite element method simulation and measured curvature using 3D scanner. Packaging substrate is easily bent and deflected while undergoing various processes such as curing of prepreg and copper pattern plating. We prepare specimens with various conditions and measure contours of each specimen and compute the residual stresses on deposited films using analytical solution to find the principle of bending. Core and prepreg in packaging substrate are made up of resin and bundles of fiber which exist orthogonally each other. Anisotropic material properties cause peculiar bending behavior of packaging substrate. We simulate the bending deflection with finite element method and verify the simulated deflection with measured data. The plating stress of electrodeposited copper is about 58 MPa. The curing stresses of solder resist and prepreg are about 13 MPa and 6.4 MPa respectively in room temperature.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.183-190
• /
• 2017

This paper proposes a dynamic magnetic field emulator (DMFE), which can electrically emulate information for the magnetic stripes of most widely used credit cards. Payment transactions with most common credit cards are performed by reading the card's information, encoded in magnetic stripes, using the reader head of a point-of-sale (POS) system. A stripe-type permanent magnet is attached to the back side of the credit card, and information for payments or value-added service is reorganized by exposing it to strong magnetic field. The process of data recording and retrieving as stated above has been pointed out as a major cause of illegal credit card use, because the information on the magnetic stripe is always exposed, and is thus vulnerable to forgery or alteration. A dynamic magnetic field emulator displays card information only when necessary by using the principle of solenoidal magnets. The DMFE proposed in this paper can prevent fraudulent use if it is operated with a device, like a smart phone, or a separate user-authentication procedure. In addition, because it is possible to display various information as needed, it can be utilized for a smart multi-card application, in which information for multiple cards is stored in one card, and can be selected and used as needed. This paper introduces the necessity of the DMFE and its manufacturing principles. As a result, this study will be helpful for making various application cases in payment, which is a core area of the Fintech (a newly-coined word of finance and technology) industry.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.3
• /
• pp.29-34
• /
• 2008

A large diameter sampler was developed to take undisturbed samples from not only soft ground but also sandy and weathered ground. The large diameter sampler which was developed in Korea Institute of Construction Technology(KICT-type large diameter sampler) was manufactured based on the principle of triple core barrel sampling. A specially designed cutting device was used to cut and contain various kinds of samples in the sampler during a sampling and retrieval procedure. By adjusting the stiffness of the spring located at the top of the sampler, the distance between the cutting shoe and auger can be controlled in accordance with the ground condition. In order to investigate the applicability of the developed sampler and compare the quality of the samples taken by the sampler with that by the traditional thin-walled tube sampler, samples were taken at various sites according to the ground condition. And a series of laboratory tests such as the unconfined compress ion test, triaxial compression test, oedometer test, large diameter Rowe cell consolidation test (D: 150 mm) were performed. The test results showed that the samples by the KICT-type large diameter sampler show higher quality than the samples by the thin-walled tube sampler. And the validity and applicability of the developed KICT-type large diameter sampler was confirmed accordingly.

• Journal of the Korean Institute of Navigation
• /
• v.22 no.2
• /
• pp.13-22
• /
• 1998

Shipbome Automatic Identification System (AIS) will be an important manne equipment used for identification, surveillance and communication in the 21st century, which is currently being researched in developed countries. A technical scheme of AlS is proposed in this paper. The main component of the AlS is a broadcast transponder, and the core technology is a VHF radio data link with high capacity, named STDMA (Self-organized Time Division Multiple Access). The ships installed the AlS, which will automatically and periodically broadcast their positions and identities in the marine VHF channels, can be displayed on a screen of an ECDIS on board or in VTS centers. The AlS is able to support not only broadcast service but also point-to-point communication service. This paper presents the configuration, operation principle and functionality of the AlS as well as the scenario of STDMA. In addition, the standardization work of AlS in IMO is introduced in this pauer, too.

• The Journal of Korean Medical History
• /
• v.30 no.1
• /
• pp.11-22
• /
• 2017

This paper is a study on the life and clinical reasoning of Kim Goo Young (1958-2014). Offering a new perspective through his interpretation of Donguibogam (東醫寶鑑), Kim introduced his unique theory of Korean medicine, 'The Theory of Byeongin (病因論)'. Kim recognized the confusing situation of communication between people studying Korean medicine and tried to make a new standard based on the principle that many people can share. 'The Theory of Byeongin' offers a newly constituted "Donguibogam" focusing on 'Byeongin' (病因, pathologic origin) which can be translated as the cause of a disease. In so doing Kim recognized 'Byeongin' as the most important factor in 'Byeonjeung' (辨證, classifying the origin), or the classification method of symptoms. In addition, Kim recognized how 'Byeongin' was considered to be a diseased lifestyle, and tried interpreting. The patient's lifestyle to treat diseases. As a result, 'The Theory of Byeongin' is a theory consisting of an intuitive structure, reducing notable elements like Yin Yang Five Movement theory. The theory's significant characteristic is its easy application in clinical settings due the established core principles which are based on Kim's insight and clinical experience. This study contributes to the understanding of the theoretical and clinical development of Korean medicine through deeper studies on 'The Theory of Byeongin' and Kim's medical theory.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.33-37
• /
• 2006

Since 1993, the civil aviation community through RTCA (Radio Technical Commission for Aeronautics) and the ICAO (International Civil Air Navigation Organization) have been working on the definition of GNSS augmentation systems that will provide improved levels of accuracy and integrity. These augmentation systems have been classified into three distinct groups: Aircraft Based Augmentation Systems (ABAS), Space Based Augmentation Systems (SBAS) and Ground Based Augmentation Systems (GBAS). The last one is an implemented system to support Air Navigation in CAT-I approaching operation. It consists of three primary subsystems: the GNSS Satellite subsystem that produces the ranging signals and navigation messages; the GBAS ground subsystem, which uses two or more GNSS receivers. It collects pseudo ranges for all GNSS satellites in view and computes and broadcasts differential corrections and integrity-related information; the Aircraft subsystem. Within the area of coverage of the ground station, aircraft subsystems may use the broadcast corrections to compute their own measurements in line with the differential principle. After selection of the desired FAS for the landing runway, the differentially corrected position is used to generate navigation guidance signals. Those are lateral and vertical deviations as well as distance to the threshold crossing point of the selected FAS and integrity flags. The Department of Applied Science in Naples has create for its study a virtual GBAS Ground station. Starting from three GPS double frequency receivers, we collect data of 24h measures session and in post processing we generate the GC (GBAS Correction). For this goal we use the software Pegasus V4.1 developed from EUROCONTROL. Generating the GC we have the possibility to study and monitor GBAS performance and integrity starting from a virtual functional architecture. The latter allows us to collect data without the necessity to found us authorization for the access to restricted area in airport where there is one GBAS installation.

• Journal of Navigation and Port Research
• /
• v.36 no.2
• /
• pp.105-112
• /
• 2012

In order to improve the existing S-57 standard, International Hydrographic Organization(IHO) has developed S-100 standard, a Universal Hydrographic Data Model(UHDM) expanded from ISO 19100 series standard to hydrographic area, and is in the process of its implementation. International Maritime Organization(IMO) has established CMDS based on e-Navigation strategy data standard as International Association of Lighthouse Authorities(IALA) established IHDM based on aids to navigation data standard and each data standard is linked with the S-100 standard. Fundamental concept and core principles of S-100 standard is suitable not only for the development of a wide range of hydrographic data and service production standard, including the next generation ENC, but also the development of product specification of non-hydrographic area. This study has examined the operation principle of S-100 standard and analyzed its implementation process as e-Navigation data in relation with ENC. It also noted the utilization of S-100 standard based e-Navigation and its potential effect via examining the development cases of S-100 standard-based product specification, such as nautical publication, ship reporting and pilot request, digital routing guide, tide and water level transmission and other important data cases of e-Navigation field.