• 제목/요약/키워드: core formula

검색결과 137건 처리시간 0.025초

유체 부가질량 및 감쇠 결정시 점성 및 편심 영향에 대한 유한요소해석 (Finite Element Analysis for Evaluation of Viscous and Eccentricity Effects on Fluid Added Mass and Damping)

  • 구경회;이재한
    • 한국지진공학회논문집
    • /
    • 제7권2호
    • /
    • pp.21-27
    • /
    • 2003
  • 일반적으로 유체-구조물 상호작용을 고려한 유체속 구조물들의 지진 및 진동해석에는 주어진 시스템에 대한 유체부가질량을 추정하여 구조물관 연계하는 단순해석 방법을 주로 사용한다. 실제로 유체속 구조물의 응답특성은 유체부가질량 뿐만 아니라 유체점성으로 인한 감쇠영향을 받으며 이들은 모두 연계항을 갖는 복잡한 행렬 형태로 나타난다. 본 연구에서는 비점성 및 점성 유체에 대한 Navier-Stokes 지배방정식의 선형화를 통한 유한요소 정식화를 유도하였다. 이를 이용하여 유한요소 해석 프로그램을 작성하고 6각형 단면특성을 갖는 액체금속로 노심에 대하여 덕트집합체 사이의 유체간격과 레이놀즈수 변화에 따른 유체부가질량과 유체감쇠에 대한 유한 요소 해석을 수행한 결과, 유체간격이 줄어들수록 유체부가질량은 유체점성의 영향을 크게 받고 유체감쇠는 점성으로 인하여 레이놀즈수의 영향을 크게 받는 것으로 나타났다. 또한 편심을 갖는 동축원통에 대한 유한요소 해석결과, 편심이 증가할수록 유체부가질량은 크게 증가하지만 유체감쇠는 편심이 작은 경우 거의 변화가 없으며 어느 일정 수준이상으로 편심이 커질 경우에는 크게 영향을 받는 것으로 나타났다.

축력이 재하된 원형 콘크리트 충전강관 기둥의 최대 저항능력 (Ultimate Resisting Capacity of Axially Loaded Circular Concrete-Filled Steel Tube Columns)

  • 곽효경;곽지현
    • 콘크리트학회논문집
    • /
    • 제24권4호
    • /
    • pp.423-433
    • /
    • 2012
  • 콘크리트 충전 강관 기둥은 축하중 재하시 콘크리트에 구속응력이 발생함에 따라 콘크리트의 강도가 증가한다. 콘크리트의 강도 증가분은 발생된 구속응력의 크기에 종속되므로 비선형 해석을 통하여 원형 콘크리트 충전 강관의 축방향 하중에 대한 최대 저항능력을 산정하였다. 콘크리트의 포아송비 및 응력-변형률 관계와 같은 비선형 재료 특성을 고려하였으며, 강관의 다축 항복조건을 기준으로 최대 구속응력을 산정하였다. 실험 결과와의 비교를 통하여 제안된 모델을 검증하였으며, 회귀분석을 통하여 D/t 비율 및 재료성질에 따른 최대 구속응력 산정법을 단순화하였다. Eurocode 4 설계 기준 및 기존에 제안된 다양한 경험식과의 비교를 통하여 제안된 회귀분석식의 타당성을 검증하였다.

전단이 지배하는 RC부재의 새로운 트러스 모델링 기법 연구 (전편) - 기본 개념 유도를 중심으로 - (A New Refined Truss Modeling for Shear-Critical RC Members (Part I) - lts derivation of Basic Concept -)

  • 김우;정제평;김대중
    • 콘크리트학회논문집
    • /
    • 제16권6호
    • /
    • pp.785-794
    • /
    • 2004
  • 이 논문은 휨과 전단이 동시에 작용하고 있는 철근콘크리트 보에서 전단은 휨모멘트의 변화율(V=dM/dx)이라는 기본 관계식에 근거한 새로운 트러스모델링기법을 제안하는 것이다. 이 새로운 모델의 핵심은 보의 경간에서 내부 모멘트 팔길이의 변화를 고려함으로써, 보의 전단 저항 메커니즘을 아치작용과 보작용이라는 두 기본 성분의 합으로 표현할 수 있게 한 것이다. 이두 작용에 의한 전단 저항 구성비는 상호 변형 적합조건을 적용하여 계산하였는데, 이 때 수정압축장이론과 CEB/FIP MC-90의 인장강화효과 공식을 이용하였다. 이렇게 함으로써 전단과 모멘트 관계식 V=dM/dx을 수치적으로 복제할 수 있는 새로운 트러스모델을 결정하였다.

남극 사우스셰틀란드 해양퇴적물내 스멕타이트의 광물학적 특성과 기원 (Mineralogical Characteristics and Origins of Smectite in the Marine Sediment around South Shetland Islands, Antarctica)

  • 정기영;윤호일
    • 한국광물학회지
    • /
    • 제15권1호
    • /
    • pp.22-32
    • /
    • 2002
  • Mineral composition and chemistry of the clay minerals in the three cores from the continental shelves of South Shetland Islands (NCS09) and Anberse Island (GC98-2), and from the fjord of King George Island (A10-01) were determined by X-ray diffraction and electron microprobe analysis in search of the distributions and origin of the clay minerals in the Antarctic marine sediments. Smectite content is relatively high in NCS09 regardless of core depths (av. 8.3%), but low in GC98-2 (1.1%). In Al0-01, smectite content is higher in the upper section than in the lower section. Kaolinite was not detected from all the cores in this study Yellow to yellowish green clay granules were commonly scattered in the sediments of NCS09 cores. The clays contain 16.97% and 2.53% $Fe_2$$O_3$$K_2$O. Average structural formula of the clay indicates ferrian beidellite . The (Fe, K)-rich smectite of NSC09 must have been derived from relatively young basaltic volcanics altered by reaction with seawater near Shetland Islands by glacial erosion or eolian process related to volcanic eruption. GC98-2 nearer to Antarctic continent is very low in smectite content. In A10-01, the lower diamicton was deposited from the glacial erosion of smectite-free ancient volcanics in the interior of King George Island, while the upper section was derived from the smectite-bearing terrestrial debris and eolian materials after retreat of glaciers in Marian Cove and ice cover in Barton Peninsula. Thehigh K contents of smectites suggest the interstratification of illite and smectite layers, which might be observed by future TEM lattice fringe imaging.

실험(實驗)과 FEM기법(技法)을 사용(使用)하여 구(求)한 침투유량(浸透流量)의 비교(比較) (Comparison of Seepage Quantity Calculated by Experiments and Finite Element Method)

  • 진병익;김재홍
    • 대한토목학회논문집
    • /
    • 제5권2호
    • /
    • pp.83-90
    • /
    • 1985
  • 본(本) 논문(論文)은 제체(堤體)의 중앙심벽형(中央心壁型) model을 제작(製作)해서 상류측(上流側) 각(各) 수위(水位)의 변화(變化)에 대한 침투유량(浸透流量)을 실험(實驗)을 통하여 구하고, 이 때의 침윤선형상(浸潤線形狀)과 Equipotential line에 대하여도 고찰(考察)한 것이다. 또한 실험(實驗)에서 얻은 자료(資料)를 FEM기법(技法)을 사용하여 구한 유선망(流線網)의 각요소별(各要素別) Flow-rate에 대한 유속(流速)과 침투유량(浸透流量)을 실험치(實驗値)와 근사리론공식(近似理論公式)에서 산출(算出)된 값과 비교검토(比較檢討)하였다. 침투수량(浸透水量)은 고수위시(高水位時)에서는 실험치(實驗値)보다 FEM 값이 적게 나타났으며, 저수위시(低水位時)에는 거의 비슷한 값이었다. 그리고, 유선망(流線網)이 형성(形成)된 각(各) 요소별(要素別) Flow-rate 는 X, Z 축(軸)은 수위변화(水位變化)가 있어 흐름에 따른 유속(流速)이 크나 Y 축(軸)의 유속(流速)은 무시할 수 있을 정도의 적은 값이었다.

  • PDF

흙의 다짐에 관한 연구(제4보) -흙의 다짐이 -축골조강동 및 투수계수에 미치는 영향- (Study on the Soil Compaction (Part 4) -The Influence of Soil Compadtion on Unconfined Compressive Strength and Coefficient of Permeability-)

  • 강예묵
    • 한국농공학회지
    • /
    • 제12권3호
    • /
    • pp.2003-2012
    • /
    • 1970
  • In order to the influence of grain size distribution on compressive strength and coefficient of permeability, unconfined compression test and permeability test were performed for seventy samples that have various grain-size distributions. Its results are as follows: 1. Maximum unconfined compressive strength appears at the dry side of optimum moisture content. 2. Unconfined compressive strength is proportional to the increase of percent passing of No. 200 sieve. 3. Precent of deformation in failure increases in proportion to the increase of percent passing of No. 200 sieve, and modulus of No. 200 sieve, and modulus of deformation also increases in proportion to percent passing of No. 200 sieve. 4. Unconfined compressive strength increases in proportion to uniformity coefficient, liquid limit and plastic index, but it decreases gradually according to the increase of coefficient of grading and classification area. 5. Maximum dry density decreases according to the increase of void ratio. 6. Coefficient of permeability decreases according to the increase of percent passing of No. 200 sieve, and when percent of No. 200 sieve, and when percent passing of No. 200 enlarged more than 40%, it becomes less than $10^{-6}cm/sec$ which is the limit of coefficient of permeability of core material for earth dam proposed by Lee. 7. Coefficient of permeability increases according to the increase of coefficient of grading, classification area and index of Talbot formula r, but it was rather decrease by the increase of uniformity coefficient. 8. Coefficient of permeability seems to depend on the size and the shape of the flow path which is a series of void to be concerned by the size and the proprton of soil grain, even though void ratios are same.

  • PDF

이용자 생성 도서정보 태그에 기반한 소설 검색의 패싯 유형 개발 (Developing Facets for Fiction Retrieval Based on User-generated Book Tags)

  • 심지영
    • 정보관리학회지
    • /
    • 제37권2호
    • /
    • pp.225-249
    • /
    • 2020
  • 본 연구는 소설 검색 환경을 개선하기 위해, 도서태그로부터 소설 이용자가 소설 탐색 상황에서 요구하는 다양한 패싯 요소를 식별하고 체계화하는 것을 목적으로 한다. 소설의 기본 패싯 체계를 랑가나단의 PMEST 기본 패싯에 기반하여, 1) 소설 자료를 형성하는 주체, 2) 소설을 구성하는 내용적, 외형적 성질, 3) 독자가 책과 상호작용하는 행위, 4) 소설 및 독서활동과 관련된 공간 정보, 5) 소설 및 독서활동과 관련된 시간 정보로 정의하고, 소설 7,174건에 부여된 약 31만 건의 태그 중 핵심 태그 3,730건을 선별하여 내용분석하였다. 그 결과, 소설 패싯의 상위범주 25개를 중심으로 다양한 속성을 체계화하였다. 본 연구의 결과는 향후 도서관 OPAC이나 소설 DB에 패싯 내비게이션 형태로 적용될 수 있을 것으로 기대된다.

비선형 와류격자법을 이용한 낮은 종횡비 날개의 공력특성 계산 (Calculation of Low Aspect Ratio Wing Aerodynamics by Using Nonlinear Vortex Lattice Method)

  • 이태승;박승오
    • 한국항공우주학회지
    • /
    • 제36권11호
    • /
    • pp.1039-1048
    • /
    • 2008
  • 본 논문에서는 새로운 비선형 와류격자법 계산 과정이 제안된다. 기존의 계산 과정은 자유와의 형태 계산을 위해 내부 반복계산 및 하향이완법을 포함한다. 하지만 본 논문에서는 유사 정상 개념에 기초한 새로운 수식을 제안하여 자유와의 형태를 계산함으로써, 계산 과정에서 내부 반복계산 및 하향이완법을 생략한다. 또한 반복계산이 진행됨에 따라 각 분절에 유도되는 유속도를 적절히 평균해 줌으로써 알고리듬의 수치적 안정성을 향상시킨다. 그리고 낮은 종횡비 날개에 대한 수치실험을 수행하여 분절의 길이, 와류중심반경, 후류영역 계산범위 등과 같은 중요 인자들의 적절한 기준을 경험적으로 결정한다.

Retrospective Study of Predictors of Bone Metastasis in Prostate Cancer Cases

  • Ho, Christopher Chee Kong;Seong, Poh Keat;Zainuddin, Zulkifli Md;Abdul Manaf, Mohd Rizal;Parameswaran, Muhilan;Razack, Azad H.A.
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제14권5호
    • /
    • pp.3289-3292
    • /
    • 2013
  • Introduction: The purpose of this study was to identify clinical profiles of patients with low risk of having bone metastases, for which bone scanning could be safely eliminated. Materials and Methods: This retrospective cross sectional study looked at prostate cancer patients seen in the Urology Departments in 2 tertiary centres over the 11 year period starting from January 2000 to May 2011. Patient demographic data, levels of PSA at diagnosis, Gleason score for the biopsy core, T-staging as well as the lymph node status were recorded and analysed. Results: 258 men were included. The mean age of those 90 men (34.9%) with bone metastasis was $69.2{\pm}7.3$ years. Logistic regression found that PSA level (P=0.000) at diagnosis and patient's nodal-stage (P=0.02) were the only two independent variables able to predict the probability of bone metastasis among the newly diagnosed prostate cancer patients. Among thowse with a low PSA level less than 20ng/ml, and less than 10ng/ml, bone metastasis were detected in 10.3% (12 out of 117) and 9.7% (7 out of 72), respectively. However, by combining PSA level of 10ng/ml or lower, and nodal negative as the two criteria to predict negative bone scan, a relatively high negative predictive value of 93.8% was obtained. The probability of bone metastasis in prostate cancer can be calculated with this formula: -1.069+0.007(PSA value, ng/ml)+1.021(Nodal status, 0 or 1)=x Probability of bone metastasis=$2.718^x/1+2.718^x$. Conclusion: Newly diagnosed prostate cancer patients with a PSA level of 10ng/ml or lower and negative nodes have a very low risk of bone metastasis (negative predictive value 93.8%) and therefore bone scans may not be necessary.

알루미늄 압출재의 구조적 거동 특성 및 최적설계에 관한 연구 (A Study on the Optimum Design and Structural Behaviors of Aluminium Extrusions)

  • 서승일;손건호
    • 대한조선학회논문집
    • /
    • 제35권1호
    • /
    • pp.88-97
    • /
    • 1998
  • 파형 심재를 가지는 샌드위치 평판은 종 횡방향으로 충분한 강도를 가지며, 부재를 연결하기 위한 용접라인이 감소되고, 종 부재를 보강하기 위한 횡부재가 필요하지 않는다. 이러한 특성을 활용한 대형 알루미늄 압출재는 철도 차량과 초고속선의 중량 및 생산비용 절감을 위하여 사용될 수 있다. 그러나, 대형 알루미늄 압출판의 적절한 설계를 위해서는 압출재의 구조적인 거동에 대한 이해가 선행되어야 한다. 본 논문에서는 먼저, 구조적인 거동을 이해하기 위한 상세 유한요소 해석을 수행하였고 둘째로, 설계에 적용하기 위한 간략화된 이론식을 제안하였다. 제안된 간략식은 상세 유한요소 해석에 의한 결과와 비교해 볼 때 높은 정확도를 보이고 있음을 알 수 있었고, 제안된 간략식은 초기 설계 단계에서의 반복적인 해석에서 유용하게 사용될 수 있을 것이다.

  • PDF