• Steel and Composite Structures
• /
• v.29 no.1
• /
• pp.77-90
• /
• 2018

This paper presents a combined numerical, experimental, and theoretical study on the behavior of the concrete-filled double circular steel tubular (CFDT) stub columns under axial compressive loading. Four groups of stub column specimens were tested in this study to find out the effects of the concrete strength, steel ratio and diameter ratio on the mechanical behavior of CFDT stub columns. Nonlinear finite element (FE) models were also established to study the stresses of different components in the CFDT stub columns. The change of axial and transverse stresses in the internal and external steel tubes, as well as the change of axial stress in the concrete sandwich and concrete core, respectively, was thoroughly investigated for different CFDT stub columns with the same steel ratio. The influence of inner-to-outer diameter ratio and steel ratio on the ultimate bearing capacity of CFDT stub columns was identified, and a reasonable section configuration with proper inner-to-outer diameter ratio and steel ratio was proposed. Furthermore, a practical formula for predicting the ultimate bearing capacity was proposed based on the ultimate equilibrium principle. The predicted results showed satisfactory agreement with both experimental and numerical results, indicating that the proposed formula is applicable for design purposes.

• Journal of Information Technology Services
• /
• v.11 no.3
• /
• pp.67-87
• /
• 2012

These days, firms are focusing on the improvement of relationships with business partners. The supply chain integrations are taking critical role in improving the relationships with business partners. In accordance with the development of the IT technology, it became possible for firms not only to integrate inner parts of the organization, but also to integrate the company with other organizations in the supply chain, which is open system. Therefore, in e-Biz environments, it is imperative for firms to strengthen the core capacity through the supply chain integration, and to precisely determine the components of the determinants of e-Business integration which impact the firm performance. This study analyzed determinants that have impacts on business integration in IT capacity perspectives in competetive environments. We analyzed 163 domestic companies to find out many significant suggestive points. First, IT management capacity, process innovation capacity are adopted as determinants of differentiation and competetive edges against competing firms. Second, it is analyzed that the more the companies are in intensified competetive environment, the more likley that the innovation capacity and partner management capacity become the determinants of the business integration of the companies and that they pursue new market development strategy. Third, it is analyzed that the more the companies are in high demand fluctuation, the more likley that the innovation capacity becomes the determinants of the business integration of the companies, and that they pursue new market development strategy and operation efficiency strategy. Last, it is analyzed that the more the companies are Technology dependent, the more likely that IT management capacity and process innovation capacity become the determinants of business integration, and that they pursue new market development strategy and operation efficiency strategy. These results provide us the foundation that the determinants that we have analyzed can impact the supply chain integration strategies which take into account the competetive environments.

• Journal of Information Technology Services
• /
• v.19 no.5
• /
• pp.33-47
• /
• 2020

In recent years, due to the demand for operating efficiency and cost reduction of industrial facilities, remote access via the Internet is expanding. the control network accelerates from network separation to network connection due to the development of IIoT (Industrial Internet of Things) technology. Transition of control network is a new opportunity, but concerns about cybersecurity are also growing. Therefore, manufacturers must reflect security compliance and standards in consideration of the Internet connection environment, and enterprises must newly recognize the connection area of the control network as a security management target. In this study, the core target of the control system security threat is defined as the network boundary, and issues regarding the security architecture configuration for the boundary and the role & responsibility of the working organization are covered. Enterprises do not integrate the design organization with the operation organization after go-live, and are not consistently reflecting security considerations from design to operation. At this point, the expansion of the control network is a big transition that calls for the establishment of a responsible organization and reinforcement of the role of the network boundary area where there is a concern about lack of management. Thus, through the organization of the facility network and the analysis of the roles between each organization, an static perspective and difference in perception were derived. In addition, standards and guidelines required for reinforcing network boundary security were studied to address essential operational standards that required the Internet connection of the control network. This study will help establish a network boundary management system that should be considered at the enterprise level in the future.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.389-396
• /
• 2003

InfiniBand technology is being accepted as the future system interconnect to serve as the high-end enterprise fabric for cluster computing. This paper presents the design and implementation of the InfiniBand system interconnect, focusing on an InfiniBand host channel adapter (HCA) based on dual ARM9 processor cores The HCA is an SoC tailed KinCA which connects a host node onto the InfiniBand network both in hardware and in software. Since the ARM9 processor core does not provide necessary features for multiprocessor configuration, novel inter-processor communication and interrupt mechanisms between the two processors were designed and embedded within the KinCA chip. Kinch was fabricated as a 564-pin enhanced BGA (Bail Grid Array) device using 0.18${\mu}{\textrm}{m}$ CMOS technology Mounted on host nodes, it provides 10 Gbps outbound and inbound channels for transmit and receive, respectively, resulting in a high-performance cluster system.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.129-136
• /
• 2005

The groundwater survey was carried out by electrical resistivity and resistivity tomography using several kinds of electrode array to delineate the depth of the saturated zone and basement complex, the aquifer system of fractured rock, and the 2-D resistivity structure was obtained by inversion technique. And the hole-to-surface and crosshole tomography were applied for two boreholes and the inverted resistivity tomogram are obtained. The comparison of those data with core logging data was performed and those results were relatively well correlated. And it was possible to find out the configuration of basement and the fracture zone and the aquifer system from the 2-D resistivity structure and resistivity tomogram.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.1189-1192
• /
• 2005

Due to their slow degradation properties, hydrophobic organic contaminants in estuarine sediment have been a concern for risks to human health and aquatic organisms. Studies of fate and transport of these contaminants in estuaries are further complicated by the fact that hydrodynamics and sediment transport processes in these regions are complex, involving processes with various temporal and spatial scales. In order to simulate and quantify long-term attenuation of Polycyclic Aromatic Hydrocarbons (PAH) in the Elizabeth River, VA, we develop a modeling approach, which employs the U.S. Environmental Protection Agency's water quality model, WASP, and encompasses key physical and chemical processes that govern long-term fate and transport of PAHs in the river. In this box-model configuration, freshwater inflows mix with ocean saline water and tidally averaged dispersion coefficients are obtained by calibration using measured salinity data. Sediment core field data is used to estimate the net deposition/erosion rate, treating only either the gross resuspension or deposition rate as the calibration parameter. Once calibrated, the model simulates fate and transport PAHs following the loading input to the river in 1967, nearly 4 decades ago. Sediment PAH concentrations are simulated over 1967-2022 and model results for Year 2002 are compared with field data measured at various locations of the river during that year. Sediment concentrations for Year 2012 and 2022 are also projected for various remedial actions. Since all the model parameters are based on empirical field data, model predictions should reflect responses based on the assumptions that have been governing the fate and sediment transport for the past decades.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.7
• /
• pp.303-312
• /
• 2006

This paper proposes the architecture and protocol of a data communication network for the safety system in nuclear power plants. First, we establish four design criteria with respect to determinability, reliability, separation and isolation, and verification/validation. Next we construct the architecture of the safety network for the following systems: PPS (Plant Protection System), ESF-CCS (Engineered Safety Features-Component Control System) and CPCS (Core Protection Calculator System). The safety network consists of 12 sub-networks and takes the form of a hierarchical star. Among 163 communication nodes are about 1600 origin-destination (OD) pairs created on their traffic demands. The OD pairs are allowed to exchange data only during the pre-assigned time slots. Finally, the communication protocol is designed in consideration of design factors for the safety network. The design factors include a network topology of star, fiber-optic transmission media, synchronous data transfer mode, point-to-point link configuration, and a periodic transmission schedule etc. The resulting protocol is the modification of IEEE 802.15.4 (LR-WPAN) MAC combined with IEEE 802.3 (Fast Ethernet) PHY. The MAC layer of IEEE 802.15.4 is simplified by eliminating some unnecessary (unctions. Most importantly, the optional TDMA-like scheme called the guaranteed time slot (GTS) is changed to be mandatory to guarantee the periodic data transfer. The proposed protocol is formally specified using the SDL. By performing simulations and validations using Telelogic Tau SDL Suite, we find that the proposed safety protocol fits well with the characteristics and the requirements of the safety system in nuclear power plants.

• The Korean Journal of Emergency Medical Services
• /
• v.6 no.1
• /
• pp.27-37
• /
• 2002

The health and medical service attracts more public attention as the economy of Korea is rapidly growing up and the standard of living is elevated. Especially, the interest and demand on the prehospital emergency medical service that consists of the important part of primary medical service that is directly related to the life of patients are gradually increased. However, as compared with other advanced countries such as America in this area, Korea actually fell behind in the utilization of IT (Information Technology) to maximize the efficiency of emergency service system as well as has a problem in the general service system. This study suggested the necessity to introduce EMD (Emergency Medical Dispatch) system that takes a great role as the core part in the prehospital emergency medical service that is not systemized in Korea yet. In addition, this study proposed the implementation model of EMD ASP system using ASP (Application Service Provider) in EMD system to flexibly deal with the change of IT and efficient implementation and integration of information system as well as to significantly reduce cost through wire/wireless high speed Internet network that is politically promoted in Korea on the basis of EMD. The system analysis and design was executed by HIPO (Hierarchy Plus Input Process Output) analysis that was the conceptual design technology for EMD information system modeling based on ASP and DFD (Data Flow Diagram). This study proposed DB table configuration and data schema to implement the application of web browser interface in EMD system through ERD(ER-Diagram) of EMD ASP system. Finally, this study described how to implement and utilize EMD information system. This study aims to facilitate the qualitative development of emergency medical service in the future as suggesting the concrete models for the implementation of high value-added prehospital emergency medical information system as applying ASP concept to EMD system of prehospital emergency medical service area.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.159-164
• /
• 1997

We have studied initial oxidation of the alkali metal(AM)/Si(111) surface using X-ray photoelectron spectroscopy(XPS) and reflection high energy electron diffraction(RHEED) at room temperature(RT) and high temperature(HT)(300~50$0^{\circ}C$). The oxidation of the Si(111)7$\times$7 surface was promoted by the adsorption of 1 momolayer(ML) AM, whereas no promotion occurred for submonolayer(<0.5 ML) adsorbed Si(111)7$\times$7 surface at RT. O Is core level spectra were measured with increasing oxygen exposure. It was found that the oxygen adsorbed on the Si(111)7$\times$7-AM surface have two different bond configuration, Si-O and Am-O, respectively. From these results, we discussed the role of AM-O bonding in the promoted oxidation. At HT(300~50$0^{\circ}C$), the AM-adsorbed surface became very inactive with the structural transformation to the 3$\times$1-AM. We present the results of the oxidation of the Si(111)3$\times$1-AM(Na, K, Cs) surface.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1297-1300
• /
• 2008

A conventional linear accelerator system requires a flat-topped pulse with less than ${\pm}$ 0.5% ripple to meet the beam energy spread requirements and to improve pulse efficiency of RF systems. A pulse transformer is one of main determinants on the output pulse voltage shape. The pulse transformer was investigated and analyzed with the pulse response characteristics using a simplified equivalent circuit model. The damping factor ${\sigma}$ must be >0.86 to limit the overshoot to less than 0.5% during the flat-top phase. The low leakage inductance and distributed capacitance are often limiting factors to obtain a fast rise time. These parameters are largely controlled by the physical geometry and winding configuration of the transformer. A rise time can be improved by reducing the number of turns, but it produces larger pulse droop and requires a larger core size. By tradeoffs among these parameters, the high-voltage pulse transformer with a pulse width of 10 ${\mu}s$, a rise time of 0.84 ${\mu}s$, and a pulse droop of 2.9% has been designed and fabricated to drive a klystron which has an output voltage of 284 kV, 30-MW peak and 60-kW average RF output power. This paper describes design optimization of a high-voltage pulse transformer for high-power pulsed applications. The experimental results were analyzed and compared with the design. The design and optimal tuning parameter of the system was identified using the model simulation.