• Journal of Oriental Neuropsychiatry
• /
• v.14 no.1
• /
• pp.1-16
• /
• 2003

Objective : This study was designed to assess the protective effects of Hwangryeonhaedoktang on the animal model of depression, induced by chronic mild stress(CMS). Method : Male Sprague-Dawley rats were used for this experiment. The subjects were divided into 3 groups ( 1. CMS-drug: Hwangryeonhaedoktang administered during CMS treatment, 2. CMS-vehicle: water administered, 3. normal ). After 4 weeks of CMS treatment, they were executed forced swimming test(FST), open field test and c-Fos in paraventricular nucleus(PVN) were measured. Result : 1. In FST, immobility behavior decreased significantly in CMS-drug group. 2. There was no difference in the open field test between 3 groups 3. c-Fos expressed cell bodies in PVN were significantly less in CMS-drug than in CMS-vehicle group. Conclusion : These results suggest that Hwangryeonhaedoktang may have protective antidepressant effects in CMS model rats. And these effects could be explained by the elevated stress-copying behaviors which are related with PVN of hypothalamus.

• Korean Institute of Interior Design Journal
• /
• v.20 no.3
• /
• pp.110-118
• /
• 2011

Today aesthetics expression could be a 'Everyday-life Beauty', because today art & design are closely related with a contemporary life. This thesis dealt with a everyday-life and sensitive design which sublimate from everyday-life material to the concept of aesthetics, such a purpose of this thesis establishes a base of everyday-life design through everyday-life aesthetics. This purpose made to pay attention to Japan's aesthetics concept, because Japan has been maintained and developed its own everyday-life aesthetics. Even if Japan doesn't have only everyday-life aesthetics, it is useful that is studies as some kind of a prototype. So this study analyzed about a everyday-life aesthetics and the expression method through the case-study of Japan. According to Yonagi Muneyoshi and Leonard Koren, the Wabi-Sabi has three conceptual characteristics like impermanent, incomplete, and imperfect and six expression characteristics like implication, tranquility, simplicity, coarseness, purity, and association. This study process is as follows. In the first a vocabulary of interior design was derived from three conceptual characteristics and six expression characteristics, and spatial facts was abstracted from it, and then volume, form, and then shape of composition facts of interior space was extracted from it. Finally the expression characteristics of the Wabi-Sabi in interior design was derived from these processes. In conclusion, the expression characteristics of the Wabi-Sabi in interior design is the transitional space through a Shadow, the conversional space through form and material composition, and the copying space through a natural friendship.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.188-193
• /
• 2017

In this paper, a ZVS-PWM high-frequency inverter with a PWM control function is applied to commercial system 220[Vrms], and a resonator type ZVS-PWM high-frequency inverter circuit with a fixed-two methods were proposed. The parameters of the transformer model equivalent circuit of a copier fixing device, which is an essential element in the parameter optimization of the proposed circuit, are obtained by using a high-frequency amplifier and its frequency characteristics are described. The proposed method compared to the existing single-ended ZVS-PFM high frequency inverter can suppress the voltage and current peak value of the power semiconductor switching device and reduce the switching loss. The efficiency of the proposed method itself is 98[%] at rated power output. Also, the efficiency of 96[%] can be obtained even at low output, so that the proposed high frequency inverter is very efficient inverter. The total efficiency from the commercial AC input to the inverter output is 93[%] at rated, which is considered efficient for use in copying machines. In addition, the diode bridge loss accounts for the largest portion of the overall system efficiency distribution. On the other hand, the nonparallel filter has a very low loss.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1333-1337
• /
• 2011

3D engines loading, and expansion of the usable capacity, next-generation smartphone game markets are rising briskly by the improvement in CPU processing speed of Phones (hardware of smartphone). Therefore, in creating 3D game characters, realistic and free-form animations in a small screen of a smartphone are becoming important. Through this paper, as a method of creating characters and operating for game characters to cause user's feeling, with NURBS data of MAYA, We completed a face in turns of eyes, a nose, and a mouth, and with Polygon Cube tool, modeled hands and feet. After dividing a cube into half and modeling it, through mirror copying We completed the whole body and modeled the low-polygon. Then to model realistic and free-form characters, We completed each detail with ZBrush and applied Divide level up to 4. Though they might look rough and exaggerated, We tried to express stuck-out parts and fallen-in parts effectively and smoothly with Smooth brush effect, map and design the low-polygon 3D characters.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.413-419
• /
• 2006

This study was performed to analyze the wearing practice and the purchasing characteristics of jeans in order to offer basic data to produce superior jeans made of denim with small flexibility and to improve the wearing comfort. The questionnaire were 236 Korean women from the age of 10th to 50th. For data analysis, descriptive analysis and crosstabs were used. The results were as follows, in the purchasing characteristics, when the women of 10th to 30th decided to purchase jeans they considered fashion, design and price rather than wearing comfort. But the women of 40th to 50th considered that wearing comfort is the most important factor. The 10th is found the best preferred jean is wide straight style, the 20th is straight style, the 30th is boots cut style and the 40th to 50th is straight style. In wearing practice, there was a difference among age groups on the region that felt uncomfortable when wearing jeans. As the age increases, the abdomen size also increases. Most people answered that they mend jeans after purchase for length, without any relation with age. The reason why consumers prefer jeans with middle length between the crotch and waist and also purchase jeans with a short length is because they look refined and neat. This informs us that the short length between the crotch and waist does not match with ease and comfort, which are the images of jeans in the past. Recently premium jean brands are competing to show Low Rise Jeans, which seems like a Premium Jean=Low Rise Jean formula is created. Some manufacture companies are recklessly copying foreign designs that does not fit Korean's body shape. However, as mentioned in this study results, there is a clear difference between designs that they think consider as aesthetic and functional. Therefore, it is considered necessary for developing designs for jeans that can satisfy both aesthetic appreciation and functions for Korean consumer's body shape and each age group.

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.219-225
• /
• 2018

The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.117-125
• /
• 2014

The temperature distribution of steady state rolling tires with detailed tread blocks is numerically predicted using the three dimensional full patterned tire model. A three dimensional periodic patterned tire model is constructed by copying 1-sector mesh in the circumferential direction. Using the static tire contact analysis, the strain cycles during one revolution are approximated with the strains at Guassian points of the elements which are sector-wise repeated within the same circular ring of elements, by neglecting the tire rolling effect. Based upon the multi-axial fatigue theory, the maximum principal strain is used to represent the combined effect of six strain components on the hysteretic loss. In the following, the deformation due to the inflation and vertical load is calculated using ABAQUS. Then heat generation rate in each element is calculated using an in-house code. Lastly, temperature distribution is calculated using ABAQUS again. Through the numerical experiments, the validity of the proposed prediction method is examined by comparing with the experiment and the temperature distribution of a patterned tire model is compared with those of the main-grooved simple tire model.

• The Journal of the Korea Contents Association
• /
• v.14 no.2
• /
• pp.1-9
• /
• 2014

Image inpainting is the widely used technique to restore a damaged region or to fill a hole in an image. The exemplar-based technique effectively generates new texture by copying colour values of the most correlated patch in the source into the empty region of the current patch. In traditional exemplar-based synthesis, the patch correlation is computed using only the already filled pixels of the current patch. Thus, by ignoring the correlation between the hole regions of the two patches, an undesirable patch which is highly correlated with the current patch in the already filled area but considerably dissimilar in the area to be filled can be selected, which results in bad texture propagation. To avoid such problems, a new exemplar-based inpainting method using patch extrapolation is proposed. The empty part of the current patch is extrapolated beforehand, and then the complete patch is used for finding its exemplar. Experimental results show that the proposed method provides more natural synthesis results than the conventional ones.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.3
• /
• pp.273-282
• /
• 2016

This study estimates tunnel face pressure through existing 8 analytical equations and 3D numerical analysis, and compares and examines it. In general, the estimating tunnel face pressure of domestic shield TBM has been examined by a method according to analytical equation and empirical method, but numerical analysis is combined in a section passing complicated stratigraphic condition and special soil condition. Therefore, the researcher is to find a reliable method to examine of tunnel face pressure by confirming a correlation between tunnel face pressure estimated by equation and tunnel face pressure estimated by numerical analysis program. When tunnel face pressure is estimated, both analytical equation and numerical analysis were identically examined in soil conditions such as sandy soil and cohesive soil. In addition, existing analytical equation is used as equation, and 3D analysis copying construction process and shield tunnel as numerical analysis.

• The Journal of the Korea Contents Association
• /
• v.9 no.7
• /
• pp.37-44
• /
• 2009

Digital watermarking is a technology for preventing illegal copying, for protecting intellectual property rights and copyrights, and for suggesting grounds of the ownership by inserting watermarks into digital contents. Generally speaking, watermarking techniques cannot escape from data distortion and quality degradation due to the watermark insertion. In order to overcome the shortcoming, zero-watermarking techniques which do not change the original data have been proposed recently. This paper proposes CSMVQ(Chaotic SMVQ), a zero-watermarking system for SMVQ(Side Match Vector Quantization) which shows better compression ratio and quality and less blocking effect than VQ(Vector Quantization). In SMVQ, compression progresses from left top to right bottom in order to use the information of the two neighbor blocks, so it is impossible to insert watermarks chaotically. In the process of encoding, CSMVQ dynamically considers the information of the (1 to 4) neighbor blocks already encoded. Therefore, watermark can be inserted into digital contents in chaotic way. Experimental results show that the image quality compressed by CSMVQ is better than that of SMVQ and the inserted watermark is robust against some common attacks.