• Korean Journal of Environmental Agriculture
• /
• v.12 no.2
• /
• pp.144-152
• /
• 1993

A bacterium which degrades efficiently synthetic detergents was isolated from the polluted waters, activated sludge of wastewater treatment plants or polluted soil. This bacterium showed considerably higher growth rate in the agar plate containing $2,000{\mu}g/ml$ of synthetic detergents than any other isolated strains, was identified as a Pseudomonas fluorescens or strains similar to it. The strain was named as a Pseudomonas fluorescens S1. Optimum pH and temperature for the growth of the Pseudomonas fluorescens S1 were pH 7.0 and $30^{\circ}C$, respectively. The strain was resistant to streptomycin and gentamycin, but sensitive to kanamycin. The strain was greatly resistant to zinc chloride, lead nitrate and copper sulfate, but unable to grow in the presence of relatively low concentrations of mercury chloride and silver nitrate. This strain utilized benzene, catechol, cyclohexane and xylene as a sole carbon source. The strain was well grown in the medium containing ABS 10,000${\mu}g$/ml. Degradation of ABS was 55% and 60% at 20${\mu}g$/ml and 100${\mu}g$/ml of ABS, respectively. Benzene ring was degraded 45% in 100${\mu}g$/ml of ABS. During the incubation of the strain in the medium containing ABS 100${\mu}g$/ml and COD 10,000${\mu}g$/ml for 4 days, degradation of ABS and COD were reduced to 40${\mu}g$/ml and 3,200${\mu}g$/ml, respectively. Total amino acid content of the Pseudomonas fluorescens S1 grown with 1,000${\mu}g$/ml of ABS was 115mg/g cell, whereas its content was decreased in the bacterium grown without synthetic detergent by 9.4%.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.673-680
• /
• 2022

In this study, based on PLA, we analyzed the Hounsfield Unit (HU) of materials containing 20% each of aluminum, wood, copper, carbon, and marble, and tried to analyze how they affect the image. A cylindrical phantom of 5×30×30 ㎣ (thickness×diameter×height) was fabricated using a entry-level 3D printer. The kV was changed to 80, 100 and 120, and the mAs was changed to 100 and 200 mAs, and the phantom in the center of the table was cross-scanned under a total of six conditions. A circular ROI was set using image J program and the quantification value of the material part HU and the quantification value of the peripheral part CNR were obtained. The HU average of the material part increased in the order of [PLA - wood 20%], [PLA - marble 20%], [PLA - carbon 20%], [PLA 100%], [PLA - aluminum 20%], [PLA - copper 20%] (p<0.05) a negative correlation was confirmed with the HU by increasing kV. It was confirmed that the CNR value in the peripheral area increased in the order of [PLA - marble 20%], [PLA - copper 20%], [PLA - carbon 20%], [PLA - wood 20%], [PLA - aluminum 20%], and [PLA - 100%] (p<0.05). Human organs with similar HU values for each material are [PLA - copper 20%] compact bone, [PLA - aluminum 20%] cancellous bone, [PLA 100%] coagulated blood, [PLA - carbon 20%] and [PLA - marble 20%] liver, muscle, spleen and [PLA - wood 20%] had similar values to fat. In addition, we confirmed the blur phenomenon that blurs the image around the filament with all materials, and confirmed that [PLA 100%] especially has the most blur around the filament. Therefore, it is considered desirable to reflect the HU value of the target organ and consider cloudiness around the phantom when selecting materials for medical phantom fabrication, and this research can provide basic data.

• Journal of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.385-391
• /
• 1979

It was found that cupric ion selective electrode, which was prepared by mixing CuS and $Ag_2S$ with the ratio four to one and PVC, was hard and durable. The response potentials were reproducible and linear in the range from 1.0 ${\times}$ $10^{-1}M$ to 1.0 ${\times}$ $10^{-5}M$ copper (II) solution and its slope was 25.0 mV per decade concentration at $298^{\circ}K$, slightly different from Nernstian slope. The copper (II) indicating electrode was applied in precipitation titration of 1.0 ${\times}$ $10^{-2} M Cu(II)$ sample solution containing proper amounts $NaNO_3$ with 0.1 M NaOH standard solution. Also, this electrode could be used in complex titration of Zn(II), Mg(II), Ca(II) with EDTA and stability constant of EDTA complex of Ca(II) and Mg(II) was calculated by using known Cu-$EDTA^{2-}$ stability constant.

• Conservation Science in Museum
• /
• v.13
• /
• pp.13-22
• /
• 2012

The patterns for Jeogui and Pyeseul (patterns of the queen's ceremonial robe worn and a belt ornament covering knees in the front) as owned by National Museum of Korea were made in the early 20th century and both of them were colored on paper. Through a non-destructive analysis on pigments and dyes used on both the patterns, it was attempted to identify the coloring materials. As for the analysis of the coloring pigments, the XRF was used. As a result of the pigment analysis on the pattern for Jeogui, it is presumed that lead white was used for obtaining the white color, ink stick for black color, orpiment for yellow color, cinnabar and red lead for red color, copper and arsenical or a mixture of copper carbonate and orpiment for green color whereas brass seems to have been used for obtaining other colors. The pigments used for obtaining the colors of white, black, yellow and green on the pattern for Pyeseul are the same as those used on the pattern for Jeogui whereas the red pigments used on each of the two patterns are seen to be different. Although it may be difficult to identify the kinds of blue pigments that were used on the patterns for Jeogui and Pyeseul, a mixture containing lead white is presumed to be used as blue pigment. Also, as a result of the UV-Vis spectroscopic analysis performed on the blue hanji (traditional Korean paper) of the pattern for Jeogui, it was presumed to have been dyed with indigo.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.142-148
• /
• 1997

This study was performed to develop the biological treatment technology of wastewater polluted with heavy metals. Heavy metal-tolerant microorganisms, such as Pseudomonas putida, P. aeruginosa, P. chlororaphis and P. stutzeri possessing the ability to accumulate cadmium, lead, zinc and copper, respectively, were isolated from industrial wastewaters and mine wastewaters polluted with various heavy metals. The effect of competing ions and metabolic inhibitors on heavy metal accumulation in the cells was investigated. Heavy metal accumulation into cells was drastically decreased in the presence of competing cation, $Al^{3+}$, and also decreased, at a lesser extent, in the presence of competing anions, $CO_3\;^{2-}$ and $PO_4\;^{2-}$. But heavy metal accumulation was not influenced generally in the presence of the other rations and anions. The accumulation of Cd, Zn or Cu by Cd-, Zn- or Cu-tolerant microorganism was remarkably decreased in the presence of metabolic inhibitors, but the accumulation of Pb by Pb-tolerant microorganism was little affected in the presence of metabolic inhibitors. These results suggested that the accumulation of Cd, Zn or Cu by Cd-, Zn- or Cu-tolerant microorganism was concerned with the biological activity depending on energy, and the accumulation of Pb by Pb-tolerant microorganism depended on not the biological activity but the physical adsorption on the cell surface. Each heavy metal-tolerant microorganism also exhibited some ability to accumulate the other heavy metals in solution containing equal concentrations of cadmium, lead, zinc and copper, when measured at 48 hours after inoculation of the microorganisms, but the accumulation rates were somewhat low as compared to the accumulation rates of heavy metal fitting to each tolerance. These results suggested that the accumulation of each heavy metal by each heavy metal-tolerant microorganism was a selective accumulation process.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.4
• /
• pp.312-318
• /
• 1998

The potentials of some Korean wild plants as a phytoremediator for cleaning heavy metal pollution were measured. Several plant species, Ambrosia trifida, Brassica juncea, Rumex crispus, and Abutilon theophrasti screened previously for phytoremediator were treated with cadmium and copper solution. In order to know the growth response to heavy metal stress, the plants were cultivated in hydroponic system containing heavy metals with different concentration. To know the effects of heavy metals on emergence and seedling growth, seeds of 4 species were sown in the pot and watered with heavy metal solution adjusted pH to 6.5, 5.5, and 4.5. A proposed species as potential phytoremediator, A. trifida, showed tolerance to $20{\mu}mol/L$ Cd and $80{\mu}mol/L$ Cu in nutrient solution without apparent growth reduction, and up to $100{\mu}mol/L$ Cd and $400{\mu}mol/L$ Cu without critical visual injury. Up to 311mg/kg of Cd and 369mg/kg were accumulated in dried aerial part in A. trifida. In contrast, A. theophrasti showed injury at $400{\mu}mol/L$ Cu. Significant differences were shown in Cu accumulation among the four species. A. trifida had much higher concentrations of Cd in the shoot, whereas R, crispus accumulated higher concentrations of Cd in the shoot. Testing plant species showed reduced emergence rate with heavy metal treatment. When pH was lowered, the emergence and seedling growth were affected severely with heavy metal. We can suggested that A. trifida was the most proper species for phytoremediation in heavy metal-polluted regions.

• Journal of the Korean Chemical Society
• /
• v.40 no.5
• /
• pp.341-346
• /
• 1996

Electrochemical determination of iodide was carried out by stripping voltammetry with a $(Cin)Cu(NO_3)_2$ modified-carbon paste electrode. Iodide was coordinated onto the electrode surface containing $(Cin)Cu(NO_3)_2$ via ion exchange. The oxidation peak potential of incorporated iodide was ＋0.72 V. The optimum analytical conditions for the determination of iodide were investigated using linear sweep voltammetry. Optimum conditions for the electrochemical determination of iodide were as follows: i) A predeposition solution was 0.1 M $KNO_3.$ ii) The deposition time was 10 min. iii) The composition of the electrode was 40% (w/w). The detection limit for iodide was $1.0{\times}10^{-6}M$ and the relative standard deviation was ${\pm}5.5%\;in\;2.0{\times}10^{-5}M$(four repetitions). The interference effect of other anions were also investigated. $Cl^-,\;Br^-,\;C_2O_4^{2-},\;and\;ClO_4^-$ ions do not interfere for the determination of iodide. When $SCN^-$ was added to the deposition solution, the oxidation peak current of iodide ion was decreased roughly 32%.

• Weed & Turfgrass Science
• /
• v.5 no.3
• /
• pp.136-143
• /
• 2016

This study was conducted to investigate the algicidal characteristics of cashew nut oil (CNO) and to develop CNO mixtures with other compounds having synergistic effects on the growth inhibition against a blue-green alga, Microcystis aeruginosa. Among tested CNOs, CNO with higher anacardic acid contents (Ana-A) exhibited the best algicidal activity against M. aeruginosa. Ana-A showed broad algicidal spectrum with particular greater activity against blue-green algae than green algae. Ana-A showed the greatest activity against to Oscillatoria tenuis ($IC_{50}=0.19{\mu}g\;mL^{-1}$) among the tested blue-green algae and to Chlorella vulgaris ($IC_{50}=4.54{\mu}g\;mL^{-1}$) among the tested green algae, respectively. In a mixture experiment to evaluate a chemical interaction in M. aeruginosa control, Ana-A showed a strong synergistic effect with MSB and menadione, mild synergistic effect with citric acid, and additive effect with chryspophanol, copper sulfate and quinoclamine. Taken together, our results suggest that CNO containing higher anacardic acid can be used as an eco-friendly natural algicide for selective control of blue-green algae such as M. aeruginosa and O. tenuis through an optimization of application rate and in combination with synergists such as MSB and menadione.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.4
• /
• pp.421-429
• /
• 2018

Hydrazine based reductive dissolution applied on magnetite oxide was investigated. Dissolution of Fe(II) and Fe(III) from magnetite takes place either by protonation, surface complexation, or reduction. Solution containing hydrazine and sulfuric acid provides hydrogen to break bonds between Fe and oxygen by protonation and electrons for the reduction of insoluble Fe(III) to soluble Fe(II) in acidic solution of pH 3. In terms of dissolution rate, numerous transition metal ions were examined and Cu(II) ion was found to be the most effective to speed up the dissolution. During the cycle of Cu(I) ions to Cu(II) ions, the released electron promoted the reduction of Fe(III) and Cu(II) ions returned to Cu(I) ion due to the oxidation of hydrazine. In the experimental results, the addition of a very low amount of cupric ion (about 0.5 mM) to the solution increased the dissolution rate about 40% on average and up to 70% for certain specific conditions. It is confirmed that even though the coordination structure of copper ions with hydrazine is not clear, the $Cu(II)/H^+/N_2H_4$ system is acceptable regarding the dissolution performance as a decontamination reagent.

• Animal Bioscience
• /
• v.34 no.4
• /
• pp.701-713
• /
• 2021

Objective: The present work was undertaken to evaluate the effects of storage time, choline chloride, and high concentrations of Cu and Zn on the kinetic behavior of vitamin degradation during storage in two vitamin premixes and four vitamin-trace mineral (VTM) premixes. Methods: Two vitamin premixes (with or without 160,000 mg/kg of choline) were stored at 25℃ and 60% humidity. Besides, four VTM premixes were used to evaluate the effects of choline (0 vs 40,000 mg/kg) and trace minerals (low CuSO4+ZnO vs high CuSO4+ZnO) on vitamin stability in VTM premixes stored in room, and the VTM premixes were stored in room temperature at 22℃. Subsamples from each vitamin and VTM premix were collected at 0, 1, 2, 3, 6, and 12 months. The retention of vitamin A (VA), vitamin D3 (VD3), vitamin E (VE), vitamin K3 (VK3), vitamin B1 (VB1), vitamin B2 (VB2), vitamin B3 (VB3), vitamin B5 (VB5), and vitamin B6 (VB6) in vitamin premixes and VTM premixes during storage was determined. The stability of vitamins in vitamin premixes and VTM premixes was determined and reported as the residual vitamin activity (% of initial) at each sampling point. Results: The effect of choline on VK3 retention was significant in vitamin premixes (p<0.05). The negative effect of storage time was significant for the retentions of VD3, VK3, VB1, VB2, VB5, and VB6 in vitamin premix (p<0.05). For VTM premixes, negative effect of storage time was significant (p<0.05) for the losses of vitamin in VTM premixes. Choline and high concentrations of Cu and Zn significantly increased VA, VK3, VB1, and VB2 loss during storage (p<0.05). The supplementation of high concentrations of Cu and Zn significantly decreased the concentrations of VD3 and VB6 (p<0.05) in VTM premixes at extended storage time. Conclusion: The maximum vitamin stability was detected in vitamin and VTM premixes containing no choline or excess Cu and Zn. The results indicated that extended storage time increased degradation of vitamin in vitamin or VTM premixes. These results may provide useful information for vitamin and VTM premixes to improve the knowledge of vitamin in terms of its stability.